addac-system/addac-swell-physics
ADDAC System ADDAC508 Swell Physics Chaotic / Complex Modulation · Logic Gates
10 HP chaotic / complex modulation and logic gates by ADDAC System: 1 input, 7 outputs, 9 controls, 7 modes.
ADDAC System · ADDAC508 Swell Physics User's Guide (REV01, January 2024) (PDF) ↗
Chaotic / Complex Modulation · Logic Gates · Unipolar/bipolar switch
Inputs 1
| Jack | What it does | Range | Connections |
|---|---|---|---|
| CV IN 1143 | offset or gain CV cv | — | → OFFSET, OUTPUT GAIN selected by CV IN switch = OFFSET, CV IN switch = OUTPUT GAIN |
The documents don't state: voltage, impedance, normalling (CV IN).
Outputs 7
| Jack | What it does | Range | Connections |
|---|---|---|---|
| OUTPUT 1 1143 | buoy 1 height cv | -5 to 10 V | from Gerstner wave, Output scaling, Clipping attenuated by OUTPUT GAIN selected by BIPOLAR / POSITIVE = BIPOLAR, BIPOLAR / POSITIVE = POSITIVE In 2 modes
|
| OUTPUT 2 1143 | buoy 2 height cv | -5 to 10 V | from Gerstner wave, Output scaling, Clipping attenuated by OUTPUT GAIN selected by BIPOLAR / POSITIVE = BIPOLAR, BIPOLAR / POSITIVE = POSITIVE In 2 modes
|
| OUTPUT 3 1143 | buoy 3 height cv | -5 to 10 V | from Gerstner wave, Output scaling, Clipping attenuated by OUTPUT GAIN selected by BIPOLAR / POSITIVE = BIPOLAR, BIPOLAR / POSITIVE = POSITIVE In 2 modes
|
| OUTPUT 4 1143 | buoy 4 height cv | -5 to 10 V | from Gerstner wave, Output scaling, Clipping attenuated by OUTPUT GAIN selected by BIPOLAR / POSITIVE = BIPOLAR, BIPOLAR / POSITIVE = POSITIVE In 2 modes
|
| AVERAGE OUTPUT 1143 | average of outputs 1-4 cv | — | from OUTPUT 1, OUTPUT 2, OUTPUT 3, OUTPUT 4 |
| GATE 1<2 1143 | gate while 1<2 gate | 0 to 5 V, unipolar | from Gates |
| GATE 3>4 1143 | gate while 3>4 gate | 0 to 5 V, unipolar | from Gates |
The documents don't state: voltage (AVERAGE OUTPUT); impedance (all outputs).
Controls 9
| Control | What it does | Affects | Positions |
|---|---|---|---|
| SWELL SIZE 1143 | virtual swell height knob | Gerstner wave, Clipping | — |
| AGITATION 1143 | wind / secondary swells knob | Gerstner wave | — |
| SPREAD 1143 | distance between buoys knob | Gerstner wave | In 1 mode
|
| SIMULATION SPEED 1143 | simulation speed knob | Gerstner wave | — |
| OFFSET 1143 | output offset knob | OUTPUT 1, OUTPUT 2, OUTPUT 3, OUTPUT 4 | — |
| OUTPUT GAIN 1143 | output gain knob | OUTPUT 1, OUTPUT 2, OUTPUT 3, OUTPUT 4 | — |
| CV IN switch 1143 | route CV IN switch | CV IN, OFFSET, OUTPUT GAIN |
|
| BIPOLAR / POSITIVE 1143 | output voltage range switch | OUTPUT 1, OUTPUT 2, OUTPUT 3, OUTPUT 4 |
|
| A / B MODE 1143 | operation mode switch | Gerstner wave, Clipping |
|
Blocks 4
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Gerstner wave | wave simulation motor | — | — | SWELL SIZE, AGITATION, SPREAD, SIMULATION SPEED, A / B MODE | OUTPUT 1, OUTPUT 2, OUTPUT 3, OUTPUT 4, AVERAGE OUTPUT | 1143 |
| Output scaling | offset and gain | Attenuverter / offset | CV IN | OFFSET, OUTPUT GAIN, CV IN switch, BIPOLAR / POSITIVE | OUTPUT 1, OUTPUT 2, OUTPUT 3, OUTPUT 4, AVERAGE OUTPUT | 1143 |
| Clipping | clipping modes | Waveshaper / wavefolder | — | A / B MODE | OUTPUT 1, OUTPUT 2, OUTPUT 3, OUTPUT 4 | 1143 |
| Gates | comparison gates | Logic | — | — | GATE 1<2, GATE 3>4 | 1143 |
Modes 7
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| A-Scrolling | wave computation | A / B MODE = A | — | 1143 |
| B-Evolving | wave computation | A / B MODE = B | — | 1143 |
| Bipolar | output range | BIPOLAR / POSITIVE = BIPOLAR | — | 1143 |
| Positive | output range | BIPOLAR / POSITIVE = POSITIVE | — | 1143 |
| Fold | clipping mode | — | flick A/B switch quickly | 1143 |
| Thru | clipping mode | — | flick A/B switch quickly | 1143 |
| Limit | clipping mode | — | flick A/B switch quickly | 1143 |
Specs 12
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 10 HP | — | 1143 |
| module | depth | 4.5 cm | — | 1143 |
| module | current +12V | 70 mA | user's guide | 1143 |
| module | current +12V | 160 mA | product page | 1144 |
| module | current -12V | 40 mA | — | 1143 |
| outputs | voltage range | -5 to 5 V | Bipolar | 1143 |
| outputs | voltage range | 0 to 10 V | Positive | 1143 |
| outputs | resolution | 16 bit | — | 1143 |
| gates | gate high level | 5 V | — | 1143 |
| clipping mode switch | flick time | ≤ 0.5 s | — | 1143 |
| buoys | count | 4 count | — | 1143 |
| clipping modes | count | 3 count | — | 1143 |
Properties 7
| Subject | Property | Value | Source |
|---|---|---|---|
| wave generation | algorithm | Gerstner wave | 1143 |
| OFFSET / OUTPUT GAIN | CV input | shared, switch routed | 1143 |
| clipping mode | indication | not visible | 1143 |
| top LEDs red | show | output bipolar state | 1143 |
| top LEDs yellow | show | gate states | 1143 |
| firmware | update | Teensy loader USB | 1144 |
| AVERAGE OUTPUT | computation | average of 4 outputs | 1143 |
Behavior 15
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| SPREAD | mode A | works as delay | A-Scrolling | 1143 |
| buoys | mode A | follow same path | A-Scrolling | 1143 |
| buoys | mode B | different related paths | B-Evolving | 1143 |
| outputs | SWELL SIZE fully CCW, Bipolar | all output 0V | Bipolar | 1143 |
| outputs | SWELL SIZE fully CCW, Positive | all output +5V | Positive | 1143 |
| waveform | SWELL SIZE above 12 o'clock | clipping applied | — | 1143 |
| clipping | default | Fold | — | 1143 |
| clipping | Fold mode | folds back at range limit | Fold | 1143 |
| clipping | Thru mode | wraps to opposite end | Thru | 1143 |
| clipping | Limit mode | limits to range | Limit | 1143 |
| GATE 1<2 | output 1 below output 2 | gate high +5V | — | 1143 |
| GATE 3>4 | output 3 above output 4 | gate high +5V | — | 1143 |
| outputs | smaller SPREAD | outputs more related | — | 1143 |
| outputs | bigger SPREAD | outputs more unrelated | — | 1143 |
| surface | SWELL SIZE / AGITATION increased | surface more complex | — | 1143 |
Functions 3
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Chaotic / Complex Modulation | block | patchable | Gerstner wave: 4 interrelated buoy CV outputs | 1143 |
| Logic Gates | jack | patchable | jack GATE 1<2 / GATE 3>4: comparator gates | 1143 |
| Unipolar/bipolar switch | control | patchable | BIPOLAR / POSITIVE switch | 1143 |
Power
| +12 V | 70 mA |
|---|---|
| −12 V | 40 mA |
| +5 V | — |
| Width | 10 HP |
| Depth | 45 mm |
Other Chaotic / Complex Modulation modules
Firmware 2
| Version | Released | Notes |
|---|---|---|
| D_6 | 2024-02-27 | Minor changes, improved performance.1143 |
| D_5 | — | Fixed an issue where at maximum speed the module controls would become unresponsive after a few minutes.1143 |
Sources 2
- [1143]
-
[1144]
ADDAC508 Swell Physics product page ↗product page⚠ verified 2026-06-06 · the manufacturer changed this document since