4ms/quad-clock-distributor

4ms Quad Clock Distributor Master Clock · Clock Divider / Multiplier

10 HP master clock and clock divider / multiplier by 4ms: 12 inputs, 5 outputs, 10 controls, 6 modes.

4ms · Quad Clock Distributor manual v2 (PDF) ↗

Clock Divider / Multiplier · Master Clock · Tempo / Clock Sync

Inputs 12

Inputs
JackWhat it doesRangeConnections
CLK IN 1 1563clock input
clock, gate, trigger
threshold 2.5 V
normalled from Tap Tempo clock
→ Channel 1, Channel 2
Reset 1 1563clock phase reset
trigger, gate
threshold 2.5 V
→ Channel 1
Div/Mult 1 1563Div/Mult CV
cv
0 to 10 V, unipolar
→ Channel 1, Div/Mult 1 knob
CLK IN 2 1563clock input
clock, gate, trigger
threshold 2.5 V
normalled from CLK IN 1
→ Channel 2, Channel 3
Reset 2 1563clock phase reset
trigger, gate
threshold 2.5 V
→ Channel 2
Div/Mult 2 1563Div/Mult CV
cv
0 to 10 V, unipolar
→ Channel 2, Div/Mult 2 knob
CLK IN 3 1563clock input
clock, gate, trigger
threshold 2.5 V
normalled from CLK IN 2
→ Channel 3, Channel 4
Reset 3 1563clock phase reset
trigger, gate
threshold 2.5 V
→ Channel 3
Div/Mult 3 1563Div/Mult CV
cv
0 to 10 V, unipolar
→ Channel 3, Div/Mult 3 knob
CLK IN 4 1563clock input
clock, gate, trigger
threshold 2.5 V
normalled from CLK IN 3
→ Channel 4
Reset 4 1563clock phase reset
trigger, gate
threshold 2.5 V
→ Channel 4
Div/Mult 4 1563Div/Mult CV
cv
0 to 10 V, unipolar
→ Channel 4, Div/Mult 4 knob

The documents don't state: voltage (CLK IN 1, Reset 1, CLK IN 2, Reset 2, CLK IN 3, Reset 3, CLK IN 4, Reset 4); impedance (all inputs).

Outputs 5

Outputs
JackWhat it doesRangeConnections
TAP OUT 1563tapped tempo clock
clock
0 to 5 V, unipolar
from Tap Tempo
OUT 1 1563divided/multiplied clock output
clock, gate, trigger
0 to 5 V, unipolar
from Channel 1
In 2 modes
  • Trigger Mode: 12ms trigger output
  • Gate Mode: square wave output
OUT 2 1563divided/multiplied clock output
clock, gate, trigger
0 to 5 V, unipolar
from Channel 2
In 2 modes
  • Trigger Mode: 12ms trigger output
  • Gate Mode: square wave output
OUT 3 1563divided/multiplied clock output
clock, gate, trigger
0 to 5 V, unipolar
from Channel 3
In 2 modes
  • Trigger Mode: 12ms trigger output
  • Gate Mode: square wave output
OUT 4 1563divided/multiplied clock output
clock, gate, trigger
0 to 5 V, unipolar
from Channel 4
In 2 modes
  • Trigger Mode: 12ms trigger output
  • Gate Mode: square wave output

The documents don't state: impedance (all outputs).

Controls 10

Controls
ControlWhat it doesAffectsPositions
Tap 1563tap tempo
button
Tap Tempo, TAP OUT—
Div/Mult 1 knob 1563division/multiplication amount
knob
Channel 1, OUT 1—
Div/Mult 2 knob 1563division/multiplication amount
knob
Channel 2, OUT 2—
Div/Mult 3 knob 1563division/multiplication amount
knob
Channel 3, OUT 3—
Div/Mult 4 knob 1563division/multiplication amount
knob
Channel 4, OUT 4—
THRESHOLD 1563clock/reset trigger threshold
other · 0 to 5 V
CLK IN 1, CLK IN 2, CLK IN 3, CLK IN 4, Reset 1, Reset 2, Reset 3, Reset 4—
LED Brightness 1563LED brightness trimpot
other
channel LEDs, Tap button LED—
Gate/Trigger jumpers 1563output pulse mode
jumper
OUT 1, OUT 2, OUT 3, OUT 4
  • all eight jumpers: Trigger Mode
  • four required jumpers: Gate Mode
  • all removed: QCD Expander control
5V Source 1563+5V supply source
jumper
power
  • INT: 5V from +12V regulator
  • EXT: 5V from +5V rail
BUS CLOCK jumpers 1563power-bus clock routing
jumper
Channel 1, Tap Tempo, clock bus
  • Tap->Ch1: tap clocks channel 1
  • Ch1->Bus: channel 1 to bus
  • Bus->Ch1: bus clocks channel 1

Blocks 5

Blocks and their connections
BlockKindTypesInputsControlsOutputsSource
Tap Tempomaster tap tempoClock generator—TapTAP OUT1563
Channel 1red clock divider/multiplierClock divider / multiplierCLK IN 1, Reset 1, Div/Mult 1Div/Mult 1 knobOUT 11563
Channel 2black clock divider/multiplierClock divider / multiplierCLK IN 2, Reset 2, Div/Mult 2Div/Mult 2 knobOUT 21563
Channel 3blue clock divider/multiplierClock divider / multiplierCLK IN 3, Reset 3, Div/Mult 3Div/Mult 3 knobOUT 31563
Channel 4green clock divider/multiplierClock divider / multiplierCLK IN 4, Reset 4, Div/Mult 4Div/Mult 4 knobOUT 41563

Modes 6

Modes
ModeKindSelected bySelection methodSource
Gate Modeoutput pulse modeGate/Trigger jumpers = four required jumpersjumpers1563
Trigger Modeoutput pulse modeGate/Trigger jumpers = all eight jumpersjumpers1563
QCD Expanderoutput pulse modeGate/Trigger jumpers = all removedjumpers removed, cable1563
Clock Sendbus clock modeBUS CLOCK jumpers = Tap->Ch1 + Ch1->Busjumpers1563
Clock Receivebus clock modeBUS CLOCK jumpers = Bus->Ch1jumpers1563
Stand-alonebus clock modeBUS CLOCK jumpers = Tap->Ch1jumpers1563

Hidden functions 3

Hidden functions
FunctionTriggerAffectsSource
clear tempohold Tap 1 secondTap Tempo, Channel 1, Channel 2, Channel 3, Channel 41563
clear resetknob to x16 and backChannel 1, Channel 2, Channel 3, Channel 41563
clear resettrigger into Div/Mult jackChannel 1, Channel 2, Channel 3, Channel 41563

Specs 20

Specs
SubjectQuantityValueConditionSource
modulewidth10 HP—1563
moduledepth27 mm—1563
module+12V current65 mA5V Source INT1563
module+12V current53 mA5V Source EXT1563
module+5V current13 mA5V Source EXT1563
module+5V current0 mA5V Source INT1563
module-12V current40 mA—1563
moduledepth26 mmproduct page figure1359
Div/Multmaximum division32 x—1563
Div/Multmaximum multiplication16 x—1563
Div/Multmaximum division1048576 xchannels stacked1563
Div/Multmaximum multiplication65536 xchannels stacked1563
Div/Mult jackfull-range CV0 to 10 V—1563
THRESHOLDtrigger threshold2.5 V; 0 to 5 Vfactory default centered1563
THRESHOLDLZX-compatible threshold0.5 V—1563
outputspulse width12 msTrigger Mode1563
outputsduty cycle50 %Gate Mode1563
outputsstable pulse width limit35 HzTrigger Mode1563
outputspitch quantization onset300 Hzaudio rate1563
outputspulse amplitude5 V—1359

Properties 13

Properties
SubjectPropertyValueSource
Div/Mult knobdetentsinteger amounts1563
Div/Mult knobend clicks/32 and x16 twice1563
OUTperiod basislast two input pulses1563
outputsbufferingfully buffered1359
modulefactory pulse modeGate Mode1563
modulefactory 5V SourceINT1563
moduleCLOCK OUTS header8-pin, QPLFO/VCAM/SISM1563
modulebus clockv2.0 and later1563
moduleaudio ratenot designed for1563
channelscolorsred, black, blue, green1563
LED BrightnessPCB v1.2channel LEDs only1563
LED BrightnessPCB v1.3+channel LEDs and Tap1563
Tap TempoDINSYNC conversiontwo channels, e.g. /12,/21563

Behavior 21

Behavior rules
SubjectWhenEffectModeSource
CLK IN 1unpatchedclocked by tap tempo—1563
CLK IN 2unpatchedclocked from channel 1—1563
CLK IN 3unpatchedclocked from channel 2—1563
CLK IN 4unpatchedclocked from channel 3—1563
CLK INpatchedoverrides clock from above—1563
CLK INpatchedalso clocks channels below—1563
TAP OUTchannels externally clockedstill runs tapped tempo—1563
Tapno external clocksclocks all channels—1563
Resettrigger receivedlocks clock phase anew—1563
channelincoming clock stopsoutput stops automatically—1563
Div/Mult jackCV patchedknob offsets CV—1563
THRESHOLDfully CWCLK IN/Reset ignored—1563
THRESHOLDfully CCWthreshold 5.0V—1563
OUTTrigger Mode above 35Hzpulse width unstable—1563
CLOCK OUTS headerOUT jack patchedheader not interrupted—1563
Channel 1Clock Receive modeclocked from bus—1563
Tap TempoClock Receive modeacts independently—1563
clock busClock Send, CLK IN 1 patchedsends CLK IN 1—1563
clock busClock Send, CLK IN 1 emptysends tap tempo—1563
clock busStand-alone modeignored—1563
5V SourceEXT with noisy 5V railmay glitch—1563

Functions 3

Function tags
FunctionBasisScopeEvidenceSource
Clock Divider / Multiplierblockpatchable4 clock divider/multiplier channels1563
Master Clockblockpatchableblock Tap Tempo: TAP OUT clock1563
Tempo / Clock Synccontrolpatchablecontrol Tap: tap tempo1563

Power

+12 V48 mA
−12 V40 mA
+5 V41 mA
Width10 HP
Depth26 mm

Other Master Clock modules

All Master Clock modules →

Sources 2

  1. [1359]
    4ms Quad Clock Distributor product page ↗product page · primary
    ● verified 2026-11-16
  2. [1563]
    4ms Quad Clock Distributor manual v2 ↗manual
    ● verified 2026-11-16