behringer/150
Behringer 150 Ring Mod/Noise/S&H/LFO LFO · Random / Sample & Hold CV
16 HP LFO and random / sample & hold CV by Behringer: 6 inputs, 9 outputs, 8 controls.
Behringer · 150 Ring Mod/Noise/S&H/LFO manual (mirror of official documentation via device.report) ↗
Ring Modulator · Noise Source · Random / Sample & Hold CV · Slew Limiter · Master Clock · LFO
Inputs 6
| Jack | What it does | Range | Connections |
|---|---|---|---|
| EXT SIG X/NOISE 1047 | ring mod signal input audio | impedance 100000 Ω | → ring modulator |
| EXT SIG Y/LFO 1047 | ring mod carrier input audio, cv | impedance 100000 Ω | → ring modulator |
| EXT SIG 1047 | S&H signal input cv, audio | impedance 100000 Ω | → S&H circuit selected by EXT/LFO/NOISE = EXT, EXT/LFO/NOISE = LFO, EXT/LFO/NOISE = NOISE |
| EXT CLOCK IN 1047 | external S&H clock clock | threshold 1 V impedance 100000 Ω | → S&H circuit |
| TRIGGER 1047 | LFO amplitude reset trigger, cv | — | → LFO |
| FREQ CV IN 1047 | LFO frequency CV cv | 0 to 10 V, unipolar impedance 100000 Ω | → LFO |
The documents don't state: voltage, polarity (EXT SIG X/NOISE, EXT SIG Y/LFO, EXT SIG, EXT CLOCK IN, TRIGGER); scaling, coupling, audio rate (all inputs); threshold, impedance (TRIGGER).
Outputs 9
| Jack | What it does | Range | Connections |
|---|---|---|---|
| R.M OUT 1047 | ring modulator output audio | impedance 100 Ω | from ring modulator |
| PINK 1 1047 inferred from the documents | pink noise output audio | impedance 1000 Ω | from noise generator |
| PINK 2 1047 inferred from the documents | pink noise output audio | impedance 1000 Ω | from noise generator |
| WHITE 1 1047 inferred from the documents | white noise output audio | impedance 1000 Ω | from noise generator |
| WHITE 2 1047 inferred from the documents | white noise output audio | impedance 1000 Ω | from noise generator |
| CLOCK OUT 1047 | internal S&H clock output clock | impedance 1000 Ω | from S&H circuit |
| S&H OUT 1047 | sample & hold output cv | impedance 1000 Ω | from S&H circuit |
| LFO OUT 1 1047 inferred from the documents | LFO output cv | impedance 1000 Ω | from LFO |
| LFO OUT 2 1047 inferred from the documents | LFO output cv | impedance 1000 Ω | from LFO |
The documents don't state: voltage, polarity, scaling, coupling, audio rate (all outputs); pulse (CLOCK OUT).
Controls 8
| Control | What it does | Affects | Positions |
|---|---|---|---|
| EXT/LFO/NOISE 1047 | EXT SIG source optimization switch | EXT SIG, S&H circuit |
|
| CLOCK RATE 1047 | internal clock rate fader · 2 to 25 Hz | S&H circuit, CLOCK OUT | — |
| LAG TIME 1047 | smooth CV changes fader · 0 to 8 s | S&H circuit, S&H OUT | — |
| WAVEFORM 1047 | LFO waveform select knob | LFO |
|
| FREQ RANGE 1047 | LFO frequency range switch | LFO |
|
| FREQ 1047 | LFO fine frequency fader · 0.03 to 30 Hz | LFO | — |
| DELAY 1047 | time to amplitude peak fader · 0.004 to 8 s | LFO | — |
| OUTPUT LEVEL 1047 | LFO OUT strength switch | LFO OUT 1, LFO OUT 2 |
|
Blocks 4
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| ring modulator | ring modulator | Ring modulator | EXT SIG X/NOISE, EXT SIG Y/LFO | — | R.M OUT | 1047 |
| noise generator | noise generator | Noise source | — | — | PINK 1, PINK 2, WHITE 1, WHITE 2 | 1047 |
| S&H circuit | sample & hold | Sample & hold, Slew limiter / lag, Clock generator | EXT SIG, EXT CLOCK IN | EXT/LFO/NOISE, CLOCK RATE, LAG TIME | S&H OUT, CLOCK OUT | 1047 |
| LFO | low-frequency oscillator | LFO | TRIGGER, FREQ CV IN | WAVEFORM, FREQ RANGE, FREQ, DELAY, OUTPUT LEVEL | LFO OUT 1, LFO OUT 2 | 1047 |
Specs 13
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| EXT SIG X/Y | maximum level | 20 dBu | — | 1047 |
| R.M OUT | maximum level | 15 dBu | — | 1047 |
| WHITE / PINK | output level | 0 dBu | — | 1047 |
| EXT SIG | maximum level | 17 dBu | — | 1047 |
| S&H circuit | clock rate | 2 to 25 Hz | — | 1047 |
| S&H circuit | lag time | 0 to 8 s | — | 1047 |
| LFO | frequency | 0.03 to 30 Hz | across 3 ranges | 1047 |
| LFO | delay | 0.004 to 8 s | — | 1047 |
| LFO OUT | output level | 10 V p-p | OUTPUT LEVEL x1 | 1047 |
| LFO OUT | output level | 1 V p-p | OUTPUT LEVEL x 1/10 | 1047 |
| module | current draw +12 V | 60 mA | — | 1047 |
| module | current draw -12 V | 50 mA | — | 1047 |
| module | width | 16 HP | — | 1047 |
Properties 5
Behavior 5
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| ring modulator | X and Y patched | X modulated by Y carrier | — | 1047 |
| FREQ CV IN | patched | replaces FREQ slider | — | 1047 |
| LFO | TRIGGER received | amplitude resets to 0 | — | 1047 |
| LFO | after TRIGGER reset | amplitude returns at DELAY rate | — | 1047 |
| S&H circuit | LAG TIME raised | CV changes smoothed | — | 1047 |
Functions 6
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Ring Modulator | block | patchable | ring modulator: X modulated by Y | 1047 |
| Noise Source | block | patchable | noise generator: PINK, WHITE outputs | 1047 |
| Random / Sample & Hold CV | block | patchable | S&H circuit with S&H OUT | 1047 |
| Slew Limiter | control | patchable | LAG TIME slider on S&H | 1047 |
| Master Clock | jack | patchable | CLOCK OUT: internal clock, CLOCK RATE | 1047 |
| LFO | block | patchable | LFO block with LFO OUT | 1047 |
Power
| +12 V | 60 mA |
|---|---|
| −12 V | 50 mA |
| +5 V | — |
| Width | 16 HP |
| Depth | 129 mm |
Other LFO modules
Sources 1
-
[1047]
Behringer 150 Ring Mod/Noise/S&H/LFO manual (mirror of official documentation via device.report) ↗manual · primary⚠ verified 2026-05-30 · the manufacturer changed this document since