xaoc-devices/batumi

Xaoc Devices Batumi LFO

10 HP LFO by Xaoc Devices: 8 inputs, 12 outputs, 7 controls, 7 modes.

Xaoc Devices · Xaoc Batumi Operator's Manual (rev. 1974/5.3) (PDF) ↗

LFO · Phase-offset outputs · Simultaneous Waveform Outputs · Tempo / Clock Sync · Oscillator Sync · 1V/Oct Pitch Tracking

Inputs 8

Inputs
JackWhat it doesRangeConnections
frq/ph/div (Ch1) 731slider parameter CV
cv, pitch
-5 to 5 V, bipolar
scaling v oct
→ LFO 1, slider (Ch1)
In 4 modes
  • free: frequency (1V/oct) → LFO 1
  • quad: master frequency → LFO 1, LFO 2, LFO 3, LFO 4
  • phase: master frequency → LFO 1, LFO 2, LFO 3, LFO 4
  • divide: master frequency → LFO 1, LFO 2, LFO 3, LFO 4
reset/sync (Ch1) 731reset or tempo sync
trigger, clock
—
→ LFO 1
selected by reset/sync jumper = no jumper: reset, reset/sync jumper = jumper: sync
frq/ph/div (Ch2) 731slider parameter CV
cv, pitch
-5 to 5 V, bipolar
scaling v oct
→ LFO 2, slider (Ch2)
In 4 modes
  • free: frequency (1V/oct) → LFO 2
  • quad: amplitude CV → LFO 2
  • phase: phase shift CV → LFO 2
  • divide: division CV → LFO 2
reset/sync (Ch2) 731reset or tempo sync
trigger, clock
—
→ LFO 2
selected by reset/sync jumper = no jumper: reset, reset/sync jumper = jumper: sync
In 3 modes
  • quad: hold all LFOs → LFO 1, LFO 2, LFO 3, LFO 4
  • phase: hold all LFOs → LFO 1, LFO 2, LFO 3, LFO 4
  • divide: hold all LFOs → LFO 1, LFO 2, LFO 3, LFO 4
frq/ph/div (Ch3) 731slider parameter CV
cv, pitch
-5 to 5 V, bipolar
scaling v oct
→ LFO 3, slider (Ch3)
In 4 modes
  • free: frequency (1V/oct) → LFO 3
  • quad: amplitude CV → LFO 3
  • phase: phase shift CV → LFO 3
  • divide: division CV → LFO 3
reset/sync (Ch3) 731reset or tempo sync
trigger, clock
—
→ LFO 3
selected by reset/sync jumper = no jumper: reset, reset/sync jumper = jumper: sync
In 3 modes
  • quad: reverse direction → LFO 3
  • phase: reverse direction → LFO 3
  • divide: reverse direction → LFO 3
frq/ph/div (Ch4) 731slider parameter CV
cv, pitch
-5 to 5 V, bipolar
scaling v oct
→ LFO 4, slider (Ch4)
In 4 modes
  • free: frequency (1V/oct) → LFO 4
  • quad: amplitude CV → LFO 4
  • phase: phase shift CV → LFO 4
  • divide: division CV → LFO 4
reset/sync (Ch4) 731reset or tempo sync
trigger, clock
—
→ LFO 4
selected by reset/sync jumper = no jumper: reset, reset/sync jumper = jumper: sync
In 3 modes
  • quad: next waveform → LFO 4
  • phase: next waveform → LFO 4
  • divide: next waveform → LFO 4

The documents don't state: voltage, polarity (reset/sync (Ch1), reset/sync (Ch2), reset/sync (Ch3), reset/sync (Ch4)); threshold, coupling, audio rate, impedance (all inputs).

Outputs 12

Outputs
JackWhat it doesRangeConnections
sine (Ch1) 731sine output
cv
-5 to 5 V, bipolar
from LFO 1
saw/asgn (Ch1) 731saw or assigned shape
cv
-5 to 5 V, bipolar
from LFO 1
selected by waveform jumpers = assigned shape
square (Ch1) 731square output
cv
-5 to 5 V, bipolar
from LFO 1
sine (Ch2) 731sine output
cv
-5 to 5 V, bipolar
from LFO 2
saw/asgn (Ch2) 731saw or assigned shape
cv
-5 to 5 V, bipolar
from LFO 2
selected by waveform jumpers = assigned shape
square (Ch2) 731square output
cv
-5 to 5 V, bipolar
from LFO 2
sine (Ch3) 731sine output
cv
-5 to 5 V, bipolar
from LFO 3
saw/asgn (Ch3) 731saw or assigned shape
cv
-5 to 5 V, bipolar
from LFO 3
selected by waveform jumpers = assigned shape
square (Ch3) 731square output
cv
-5 to 5 V, bipolar
from LFO 3
sine (Ch4) 731sine output
cv
-5 to 5 V, bipolar
from LFO 4
saw/asgn (Ch4) 731saw or assigned shape
cv
-5 to 5 V, bipolar
from LFO 4
selected by waveform jumpers = assigned shape
square (Ch4) 731square output
cv
-5 to 5 V, bipolar
from LFO 4

The documents don't state: scaling, coupling, audio rate, impedance (all outputs).

Controls 7

Controls
ControlWhat it doesAffectsPositions
slider (Ch1) 731mode-dependent parameter
fader
LFO 1
In 4 modes
  • free: frequency (1V/oct) → LFO 1
  • quad: master frequency → LFO 1, LFO 2, LFO 3, LFO 4
  • phase: master frequency → LFO 1, LFO 2, LFO 3, LFO 4
  • divide: master frequency → LFO 1, LFO 2, LFO 3, LFO 4
slider (Ch2) 731mode-dependent parameter
fader
LFO 2
In 4 modes
  • free: frequency → LFO 2
  • quad: amplitude → LFO 2
  • phase: phase shift → LFO 2
  • divide: division ratio → LFO 2
slider (Ch3) 731mode-dependent parameter
fader
LFO 3
In 4 modes
  • free: frequency → LFO 3
  • quad: amplitude → LFO 3
  • phase: phase shift → LFO 3
  • divide: division ratio → LFO 3
slider (Ch4) 731mode-dependent parameter
fader
LFO 4
In 4 modes
  • free: frequency → LFO 4
  • quad: amplitude → LFO 4
  • phase: phase shift → LFO 4
  • divide: division ratio → LFO 4
central button 731mode select, zoom
button
LFO sync mode section
  • click: next mode
  • hold 1 s: enter zoom mode
reset/sync jumper 731reset vs sync
jumper
reset/sync (Ch1), reset/sync (Ch2), reset/sync (Ch3), reset/sync (Ch4)
  • no jumper: reset
  • jumper present: sync (default)
waveform jumpers 732asgn waveform select
jumper
saw/asgn (Ch1), saw/asgn (Ch2), saw/asgn (Ch3), saw/asgn (Ch4)
  • default: upward saw
  • assigned: ramp, triangle, trapezoid

Blocks 5

Blocks and their connections
BlockKindTypesInputsControlsOutputsSource
LFO 1digital LFOLFOfrq/ph/div (Ch1), reset/sync (Ch1)slider (Ch1)sine (Ch1), saw/asgn (Ch1), square (Ch1)731
LFO 2digital LFOLFOfrq/ph/div (Ch2), reset/sync (Ch2)slider (Ch2)sine (Ch2), saw/asgn (Ch2), square (Ch2)731
LFO 3digital LFOLFOfrq/ph/div (Ch3), reset/sync (Ch3)slider (Ch3)sine (Ch3), saw/asgn (Ch3), square (Ch3)731
LFO 4digital LFOLFOfrq/ph/div (Ch4), reset/sync (Ch4)slider (Ch4)sine (Ch4), saw/asgn (Ch4), square (Ch4)731
LFO sync mode sectionmode toggle——central button—731

Modes 7

Modes
ModeKindSelected bySelection methodSource
freeLFO sync mode—central button; red LED731
quadLFO sync mode—central button; yellow quad LED731
phaseLFO sync mode—central button; yellow phase LED731
divideLFO sync mode—central button; blue divide LED731
zoomfine adjust mode—hold central button 1s731
resetreset/sync input modereset/sync jumper = no jumperjumper absent731
syncreset/sync input modereset/sync jumper = jumper presentjumper present731

Hidden functions 4

Hidden functions
FunctionTriggerAffectsSource
zoom modehold central button 1 sslider (Ch1), slider (Ch2), slider (Ch3), slider (Ch4)731
hold all LFOsreset/sync 2 in synced modesLFO 1, LFO 2, LFO 3, LFO 4731
reverse directionreset/sync 3 in synced modesLFO 1, LFO 2, LFO 3, LFO 4731
next waveformreset/sync 4 in synced modessaw/asgn (Ch1), saw/asgn (Ch2), saw/asgn (Ch3), saw/asgn (Ch4)731

Specs 12

Specs
SubjectQuantityValueConditionSource
sliderfrequency0.01 to 100 Hzfree mode731
LFOmax frequency500 Hzwith CV731
LFOmin cycle53 minuteswith CV731
modulelongest cycle28 hoursvoltage controlled divide mode731
divide modedivision ratios2 to 32 x slower2,3,4,8,16,32731
quad modephase shift90 degrees90/180/270 steps731
zoomdivide fine offset0 to 3 divisionsdivide mode731
frq/ph/divinput range-5 to 5 V—731
modulewidth10 hp—732
moduledepth45 mm—732
module+12V current45 mA—732
module-12V current15 mA—732

Properties 8

Properties
SubjectPropertyValueSource
LFOimplementationdigital731
frq/ph/divscaling1V/oct731
saw/asgndefault shapeupward saw731
saw/asgnassignable shapessaw, ramp, triangle, trapezoid732
LFO 1role in synced modesmaster731
expansionbreakout modulePoti732
firmwareupdatemini USB731
modulereverse power protectionyes731

Behavior 10

Behavior rules
SubjectWhenEffectModeSource
waveformsabove 100Hzlose precision and amplitude—731
mode switchmodes changedwaveform resets to jumper default—731
zoom mode exitLED flashingvalue/slider mismatch—731
reset/syncreset mode triggercycle restarts (hard sync)—731
reset/syncsync mode pulsesfrequency follows external clock—731
reset/sync 2synced modesholds all LFOs—731
reset/sync 3synced modesreverses waveform direction—731
reset/sync 4synced modesselects next waveform—731
zoom modecentral button pressedexit zoom—731
LFOs 2-4quad mode90° successive shifts—731

Functions 6

Function tags
FunctionBasisScopeEvidenceSource
LFOblockpatchablefour digital LFO channels731
Phase-offset outputsmodepatchablequad mode: 90/180/270 shifted731
Simultaneous Waveform Outputsjackpatchablesine, saw/asgn, square per channel731
Tempo / Clock Syncjackpatchablereset/sync: external tempo sync, tap731
Oscillator Syncjackpatchablereset/sync: reset mode hard sync731
1V/Oct Pitch Trackingjackpatchablefrq/ph/div input 1V/oct731

Power

+12 V45 mA
−12 V15 mA
+5 V—
Width10 HP
Depth45 mm

Other LFO modules

All LFO modules →

Sources 2

  1. [731]
    Xaoc Batumi Operator's Manual (rev. 1974/5.3) ↗manual · primary
    ● verified 2026-05-22
  2. [732]
    Xaoc Batumi product page ↗product page
    ● verified 2026-05-22