wmd/4tten
WMD 4TTEN Manual Controller
4 HP manual controller by WMD: 4 inputs, 4 outputs, 4 controls, 2 modes.
Inputs 4
| Jack | What it does | Range | Connections |
|---|---|---|---|
| A in 1951 | attenuator input (bottom) cv, audio | — | normalled from +5V → Channel A attenuated by A |
| B in 1951 | attenuator input (bottom) cv, audio | — | normalled from +5V → Channel B attenuated by B |
| C in 1951 | attenuator input (bottom) cv, audio | — | normalled from +5V → Channel C attenuated by C |
| D in 1951 | attenuator input (bottom) cv, audio | — | normalled from +5V → Channel D attenuated by D |
The documents don't state: voltage, polarity, coupling, audio rate (all inputs).
Outputs 4
| Jack | What it does | Range | Connections |
|---|---|---|---|
| A out 1951 | attenuated output (top) cv, audio | — | from Channel A attenuated by A In 2 modes
|
| B out 1951 | attenuated output (top) cv, audio | — | from Channel B attenuated by B In 2 modes
|
| C out 1951 | attenuated output (top) cv, audio | — | from Channel C attenuated by C In 2 modes
|
| D out 1951 | attenuated output (top) cv, audio | — | from Channel D attenuated by D In 2 modes
|
The documents don't state: voltage, polarity, coupling, audio rate, impedance (all outputs).
Controls 4
| Control | What it does | Affects | Positions |
|---|---|---|---|
| A 1951 | attenuation amount fader | Channel A, A out |
|
| B 1951 | attenuation amount fader | Channel B, B out |
|
| C 1951 | attenuation amount fader | Channel C, C out |
|
| D 1951 | attenuation amount fader | Channel D, D out |
|
Blocks 4
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Channel A | passive attenuator | Attenuverter / offset | A in | A | A out | 1951 |
| Channel B | passive attenuator | Attenuverter / offset | B in | B | B out | 1951 |
| Channel C | passive attenuator | Attenuverter / offset | C in | C | C out | 1951 |
| Channel D | passive attenuator | Attenuverter / offset | D in | D | D out | 1951 |
Modes 2
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| Attenuator | attenuator | — | signal patched to input | 1951 |
| Manual offset generator | offset generator | — | nothing patched to input | 1951 |
Specs 6
Properties 6
Behavior 6
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| slider | bottom position | full attenuation | Attenuator | 1951 |
| slider | top position | no attenuation | Attenuator | 1951 |
| input | nothing patched | +5V normalled offset source | — | 1951 |
| slider | bottom position, input unpatched | output 0V | Manual offset generator | 1951 |
| slider | top position, input unpatched | output 5V | Manual offset generator | 1951 |
| PCB | tight cases (TTA Z-Rails) | may not fit | — | 1952 |
Functions 1
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Manual Controller | mode | patchable | Manual offset generator: sliders set 0-5V | 1951 |
Power
| +12 V | 5 mA |
|---|---|
| −12 V | 5 mA |
| +5 V | — |
| Width | 4 HP |
| Depth | 30 mm |
Other Manual Controller modules
Sources 2
- [1951]
- [1952]