weston-precision-audio/hv1
Weston Precision Audio HV1 Analog VCO · Digital / Wavetable Oscillator
16 HP analog vco and digital / wavetable oscillator by Weston Precision Audio: 7 inputs, 9 outputs, 26 controls, 17 modes.
Weston Precision Audio · HV1 manual (PDF) ↗
Analog VCO · Digital / Wavetable Oscillator · Waveshape Morphing · Simultaneous Waveform Outputs · Through-Zero FM · Linear FM · Exponential FM · Oscillator Sync · Pulse Width Modulation · 1V/Oct Pitch Tracking · Wavefolder · Distortion / Saturation · Chord / Paraphonic Oscillator · LFO
Inputs 7
| Jack | What it does | Range | Connections |
|---|---|---|---|
| V/OCT 2044 | pitch CV pitch | scaling v oct coupling dc impedance 100000 Ω | → Analog Core |
| FM 2044 | core FM cv, audio | audio rate yes impedance 100000 Ω | → Analog Core attenuated by FM attenuator selected by FM Type = TZ Linear, FM Type = Exponential In 2 modes
|
| Sync 2044 | core sync audio, gate | coupling dc impedance 100000 Ω | → Analog Core selected by Sync Type = Reset, Sync Type = Reverse In 2 modes
|
| PWM 2044 | pulse width CV cv | coupling dc impedance 100000 Ω | → Digital Phase Shifter, Analog Core, PW |
| Lin PM 2044 | linear phase modulation cv, audio | coupling dc impedance 100000 Ω | → Digital Phase Shifter, Angle attenuated by PM attenuator |
| Morph CV 2044 | wavetable morph CV cv, audio | coupling dc audio rate yes impedance 100000 Ω | → Wavetable, Morph attenuated by Morph CV attenuator |
| Aux CV 2044 | assignable aux CV cv | 0 to 5 V, unipolar coupling dc impedance 100000 Ω | → Digital Phase Shifter, Wavetable selected by Aux CV routing = Fold, Aux CV routing = Bitcrush, Aux CV routing = WT Chord, Aux CV routing = WT Cluster In 4 modes
|
The documents don't state: voltage, polarity (V/OCT, FM, Sync, PWM, Lin PM, Morph CV); scaling (FM, PWM, Lin PM, Morph CV, Aux CV); threshold (Sync); coupling (FM); audio rate (V/OCT, PWM, Lin PM, Aux CV).
Outputs 9
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Core Triangle 2044 | core triangle out audio | — | from Analog Core |
| Core Sine 2044 | core sine out audio | — | from Analog Core |
| Core Sawtooth 2044 | core sawtooth out audio | — | from Analog Core |
| Core Pulse 2044 | core pulse out audio | — | from Analog Core |
| Hybrid Triangle 2044 | phase-shifted triangle out audio | — | from Digital Phase Shifter |
| Hybrid Sine 2044 | phase-shifted sine out audio | — | from Digital Phase Shifter |
| Hybrid Sawtooth 2044 | phase-shifted sawtooth out audio | — | from Digital Phase Shifter |
| Hybrid Pulse 2044 | phase-shifted pulse out audio | — | from Digital Phase Shifter |
| WT 2044 | wavetable output audio | — | from Wavetable |
The documents don't state: voltage, polarity, coupling, impedance (all outputs).
Controls 26
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Encoder 2044 | tune / select knob | Analog Core, Detune, Wavetable bank | In 3 modes
|
| Tune/Menu 2044 | tuning/menu toggle button | — | — |
| +/Up button 2044 | octave up / scroll button | Analog Core | In 3 modes
|
| -/Down button 2044 | octave down / scroll button | Analog Core | In 3 modes
|
| Left button 2044 | VCO/LFO range / page button | Analog Core | In 2 modes
|
| Right button 2044 | LFO view / page button | — | In 2 modes
|
| FM attenuator 2044 | FM amount knob | FM, Analog Core | — |
| PW 2044 | base pulse width knob · 0 to 100 % | Analog Core, Digital Phase Shifter, Core Pulse, Hybrid Pulse | — |
| Angle 2044 | phase offset knob | Digital Phase Shifter | — |
| PM attenuator 2044 | Lin PM amount knob | Lin PM, Digital Phase Shifter | — |
| Morph 2044 | WT morph position knob | Wavetable | — |
| Morph CV attenuator 2044 | Morph CV amount knob | Morph CV, Wavetable | — |
| FM Type 2044 | core FM type menu setting | FM, Analog Core |
|
| FM Coupling 2044 | FM input coupling menu setting | FM |
|
| Sync Type 2044 | core sync type menu setting | Sync, Analog Core |
|
| Fold Algo 2044 | wavefolding algorithm menu setting | Digital Phase Shifter |
|
| Aux CV routing 2044 | Aux CV destination menu setting | Aux CV |
|
| Triangle octave shift 2044 | hybrid triangle +1 octave menu setting | Hybrid Triangle | — |
| WT octave shift 2044 | WT output +1 octave menu setting | WT | — |
| WT Antialiasing 2044 | WT antialiasing on/off menu setting | WT |
|
| Range 2044 | core VCO/LFO range menu setting | Analog Core |
|
| Detune 2044 | digital detune on/off menu setting | Digital Phase Shifter |
|
| V/oct trim 2044 | VCO V/oct scale other | Analog Core | — |
| HF trim 2044 | VCO high-frequency response other | Analog Core | — |
| Octave Voltage Trim 2044 | octave voltage scale other | Analog Core | — |
| Right Sine Trim 2044 | hybrid sine shape other | Hybrid Sine | — |
Blocks 4
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Analog Core | triangle-core analog VCO | Oscillator | V/OCT, FM, Sync, PWM | Encoder, +/Up button, -/Down button, FM attenuator, PW | Core Triangle, Core Sine, Core Sawtooth, Core Pulse | 2044 |
| Digital Phase Shifter | digital phase shifter | Oscillator, Waveshaper / wavefolder, Distortion / saturation | Lin PM, Aux CV, PWM | Angle, PM attenuator, PW | Hybrid Triangle, Hybrid Sine, Hybrid Sawtooth, Hybrid Pulse | 2044 |
| Wavetable | 16-way morphing wavetable | Wavetable oscillator | Morph CV, Aux CV | Morph, Morph CV attenuator | WT | 2044 |
| Tuner | built-in tuner | — | — | — | — | 2044 |
Modes 17
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| Tuning screen | display mode | Tune/Menu = press | Tune/Menu toggles | 2044 |
| Menu display | display mode | Tune/Menu = press | Tune/Menu toggles | 2044 |
| VCO | core range | Left button = press | Left button on tuning screen | 2044 |
| LFO | core range | Left button = press | Left button on tuning screen | 2044 |
| Fold | Aux CV routing | Aux CV routing = Fold | Options menu | 2044 |
| Bitcrush | Aux CV routing | Aux CV routing = Bitcrush | Options menu | 2044 |
| WT Chord | Aux CV routing | Aux CV routing = WT Chord | Options menu | 2044 |
| WT Cluster | Aux CV routing | Aux CV routing = WT Cluster | Options menu | 2044 |
| TZ Linear | FM type | FM Type = TZ Linear | Options menu | 2044 |
| Exponential | FM type | FM Type = Exponential | Options menu | 2044 |
| Reset | sync type | Sync Type = Reset | Options menu | 2044 |
| Reverse | sync type | Sync Type = Reverse | Options menu | 2044 |
| Wavetable view | menu page | — | first menu page | 2044 |
| Options view | menu page | Right button = press | Right from wavetable view | 2044 |
| Tuner view | menu page | Right button = press | Right from options view | 2044 |
| Calibration mode | calibration | +/Up button = hold 3 s | hold +/UP on tuning screen | 2044 |
| Firmware update | firmware update | — | power up holding RIGHT+DOWN | 2044 |
Specs 30
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 16 HP | — | 2044 |
| module | depth | 25 mm | to back PCB | 2044 |
| module | depth to power connector | 33 mm | — | 2044 |
| module | +12V current | 125 mA | — | 2044 |
| module | -12V current | 45 mA | — | 2044 |
| Analog Core | tracking range | 8 octaves | — | 2044 |
| Analog Core | tracking error | -2 to 2 cents | — | 2044 |
| Analog Core | octave switch range | 8 octaves | — | 2045 |
| inputs | input impedance | ≥ 100000 ohm | — | 2044 |
| Digital Phase Shifter | DAC resolution | 16 bit | — | 2044 |
| Digital Phase Shifter | DAC sample rate | 150 kHz | — | 2044 |
| Digital Phase Shifter | DAC channels | 2 channels | — | 2044 |
| Wavetable | internal table length | 1024 samples | — | 2044 |
| Wavetable | morph tables | 16 tables | — | 2044 |
| Wavetable | WaveEdit table length | 256 samples | — | 2044 |
| Wavetable | WaveEdit tables per bank | 64 tables | — | 2044 |
| Wavetable | Serum table length | 2048 samples | — | 2044 |
| Digital Phase Shifter | PM range | -720 to 720 degrees | — | 2044 |
| Aux CV | CV range | 0 to 5 V | — | 2044 |
| Aux CV | chord quantize step | 0.083 V | WT Chord | 2044 |
| Wavetable | chord oscillators | 1 to 5 oscillators | WT Chord | 2044 |
| Wavetable | cluster oscillators | 5 oscillators | WT Cluster | 2044 |
| Wavetable | chord types | 35 chords | WT Chord | 2044 |
| Wavetable | max cluster spread | 19 semitones | WT Cluster, Aux CV 5V | 2044 |
| Morph CV | modulation frequency | ≤ 20 kHz | — | 2044 |
| Digital Phase Shifter | detune range | -1 to 1 octaves | detune on | 2044 |
| PW | duty cycle range | 0 to 100 % | — | 2044 |
| Digital Phase Shifter | fold algorithms | 5 algorithms | — | 2044 |
| Analog Core | tuning pot CV | 0 to 7 V | — | 2044 |
| module | max supply voltage | 13.5 V | — | 2044 |
Properties 12
| Subject | Property | Value | Source |
|---|---|---|---|
| Analog Core | circuit | analog triangle core | 2044 |
| Digital Phase Shifter | circuit | digital phase shifter | 2044 |
| Digital Phase Shifter | derived waveforms | analog circuitry | 2044 |
| FM | coupling | AC/DC selectable | 2044 |
| CV inputs | coupling | DC | 2044 |
| Aux CV | polarity | unipolar | 2044 |
| module | power protection | reverse polarity protected | 2044 |
| Wavetable | user formats | WaveEdit, Serum | 2044 |
| Wavetable | file header | standard WAV required | 2044 |
| Wavetable | 32-bit files | integer, not float | 2044 |
| inputs | max level | power supply levels | 2044 |
| Lin PM | PM type | through-zero linear | 2044 |
Behavior 27
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| FM | any FM type | affects all waveforms | — | 2044 |
| Lin PM | patched | right-side waves only | — | 2044 |
| Lin PM | patched | summed with Angle pot | — | 2044 |
| Morph CV | patched | summed with Morph pot | — | 2044 |
| PWM | patched | summed with PW pot | — | 2044 |
| PWM | patched | both pulse outputs modulated | — | 2044 |
| Digital Phase Shifter | detune off | phase-locked to core | Tuning screen | 2044 |
| Digital Phase Shifter | detune on | detunable about ±1 octave | — | 2044 |
| Sync | rising edge, Reset | core capacitor discharged | Reset | 2044 |
| Sync | rising edge, Reverse | charging direction reverses | Reverse | 2044 |
| Aux CV | WT Chord routing | quantized to 1V/oct steps | WT Chord | 2044 |
| Aux CV | WT Chord routing | WT out only | WT Chord | 2044 |
| Aux CV | 0V, WT Cluster | all 5 oscillators in tune | WT Cluster | 2044 |
| Aux CV | Fold routing | right waves folded | Fold | 2044 |
| Aux CV | Bitcrush routing | right waves bit-crushed | Bitcrush | 2044 |
| Wavetable | empty or no SD card | sine/saw/square/tri morph loaded | — | 2044 |
| Wavetable | bank switch, antialiasing on | few seconds to build | — | 2044 |
| Wavetable | WaveEdit file loaded | shows as four banks | — | 2044 |
| Wavetable | Serum file loaded | 16-table bank interleaved | — | 2044 |
| Wavetable | Serum non-standard header | file may not load | — | 2044 |
| Morph | 0% CV | first table | — | 2044 |
| Morph | 100% CV | 16th table | — | 2044 |
| module | power-up | tuning screen shown | — | 2044 |
| Encoder | tuning locked | core not tuned | Tuning screen | 2044 |
| Right button | Range LFO, tuning screen | toggles LFO waveform view | LFO | 2044 |
| +/Up button | tuner view | octave up/down still work | Tuner view | 2044 |
| Firmware update | more than one BIN | first file found used | Firmware update | 2044 |
Functions 14
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Analog VCO | block | patchable | Analog Core: triangle-core analog VCO | 2044 |
| Digital / Wavetable Oscillator | block | patchable | Wavetable: digital WT output | 2044 |
| Waveshape Morphing | jack | patchable | Morph CV: 16-way WT morph | 2044 |
| Simultaneous Waveform Outputs | jack | patchable | core and hybrid waveform outputs | 2044 |
| Through-Zero FM | mode | patchable | FM Type: TZ Linear | 2044 |
| Linear FM | mode | patchable | FM Type: TZ Linear | 2044 |
| Exponential FM | mode | patchable | FM Type: Exponential | 2044 |
| Oscillator Sync | jack | patchable | Sync: reset or reverse | 2044 |
| Pulse Width Modulation | jack | patchable | PWM: both pulse outputs | 2044 |
| 1V/Oct Pitch Tracking | jack | patchable | V/OCT input | 2044 |
| Wavefolder | mode | patchable | Aux CV routing: Fold | 2044 |
| Distortion / Saturation | mode | patchable | Aux CV routing: Bitcrush | 2044 |
| Chord / Paraphonic Oscillator | mode | patchable | Aux CV routing: WT Chord | 2044 |
| LFO | mode | patchable | Range: LFO | 2044 |
Power
| +12 V | 125 mA |
|---|---|
| −12 V | 45 mA |
| +5 V | — |
| Width | 16 HP |
| Depth | 25 mm |
Other Analog VCO modules
Sources 2
- [2044]
- [2045]