tobinski/harmonic-timing-generator
Tobinski Harmonic Timing Generator Analog VCO · Chord / Paraphonic Oscillator
18 HP analog vco and chord / paraphonic oscillator by Tobinski: 16 inputs, 14 outputs, 14 controls, 4 modes.
Tobinski · Harmonic Timing Generator manual (PDF) ↗
Analog VCO · 1V/Oct Pitch Tracking · Chord / Paraphonic Oscillator · Simultaneous Waveform Outputs · Master Clock · Clock Divider / Multiplier · Sequential / Voltage Switch · LFO · Gate / Trigger Utility
Inputs 16
| Jack | What it does | Range | Connections |
|---|---|---|---|
| SELECT 1 CV 1999 | selects multiplier output cv | 0 to 5 V, unipolar | → SELECT 1 |
| SELECT 2 CV 1999 | selects multiplier output cv | 0 to 5 V, unipolar | → SELECT 2 |
| SELECT 3 CV 1999 | selects multiplier output cv | 0 to 5 V, unipolar | → SELECT 3 |
| START IN 1999 | starts the oscillator gate, trigger | ≤ 5 V | → Oscillator, START OUT |
| STOP IN 1999 | stops the oscillator gate, trigger | ≤ 5 V | → Oscillator |
| STEP IN 1999 | one oscillator cycle trigger, clock | 0 to 5 V | → Oscillator |
| FM 1999 | FM input cv, audio | — | → Oscillator attenuated by FM |
| V/OCT 1999 | pitch CV input pitch | scaling v oct | → Oscillator |
| REF. IN 1999 | multiplier reference input audio, cv, clock | -5 to 5 V | normalled from oscillator saw → Multiplier section, OUT 1 |
| x2 IN 1999 | x2 multiplier input audio, cv, clock | — | normalled from REF. IN → Multiplier section, OUT 2 |
| x3 IN 1999 | x3 multiplier input audio, cv, clock | — | normalled from REF. IN → Multiplier section, OUT 3 |
| x2 IN (2) 1999 | x2 multiplier input audio, cv, clock | — | normalled from OUT 2 → Multiplier section, OUT 4 |
| x5 IN 1999 | x5 multiplier input audio, cv, clock | — | normalled from REF. IN → Multiplier section, OUT 5 |
| x2 IN (3) 1999 | x2 multiplier input audio, cv, clock | — | normalled from OUT 3 → Multiplier section, OUT 6 |
| x7 IN 1999 | x7 multiplier input audio, cv, clock | — | normalled from REF. IN → Multiplier section, OUT 7 |
| x2 IN (4) 1999 | x2 multiplier input audio, cv, clock | — | normalled from OUT 4 → Multiplier section, OUT 8 |
The documents don't state: voltage (FM, V/OCT); scaling (SELECT 1 CV, SELECT 2 CV, SELECT 3 CV, FM); threshold (START IN, STOP IN, STEP IN); impedance (all inputs).
Outputs 14
| Jack | What it does | Range | Connections |
|---|---|---|---|
| SELECT 1 OUT 1999 | selected multiplier output audio, clock, cv | — | from SELECT 1, Multiplier section |
| SELECT 2 OUT 1999 | selected multiplier output audio, clock, cv | — | from SELECT 2, Multiplier section |
| SELECT 3 OUT 1999 | selected multiplier output audio, clock, cv | — | from SELECT 3, Multiplier section |
| TRIANGLE 1999 | oscillator triangle wave audio, cv | -5 to 5 V, bipolar audio rate yes | from Oscillator |
| SQUARE 1999 | oscillator square wave audio, cv, clock | -5 to 5 V, bipolar audio rate yes | from Oscillator |
| START OUT 1999 | start pulse output trigger | 0 to 5 V, unipolar | from START, START IN |
| OUT 1 1999 | x1 falling saw audio, clock, cv | -5 to 5 V, bipolar | from Multiplier section |
| OUT 2 1999 | x2 falling saw audio, clock, cv | -5 to 5 V, bipolar | from Multiplier section |
| OUT 3 1999 | x3 falling saw audio, clock, cv | -5 to 5 V, bipolar | from Multiplier section |
| OUT 4 1999 | x4 falling saw audio, clock, cv | -5 to 5 V, bipolar | from Multiplier section |
| OUT 5 1999 | x5 falling saw audio, clock, cv | -5 to 5 V, bipolar | from Multiplier section |
| OUT 6 1999 | x6 falling saw audio, clock, cv | -5 to 5 V, bipolar | from Multiplier section |
| OUT 7 1999 | x7 falling saw audio, clock, cv | -5 to 5 V, bipolar | from Multiplier section |
| OUT 8 1999 | x8 falling saw audio, clock, cv | -5 to 5 V, bipolar | from Multiplier section |
The documents don't state: voltage (SELECT 1 OUT, SELECT 2 OUT, SELECT 3 OUT); pulse (START OUT); impedance (all outputs).
Controls 14
| Control | What it does | Affects | Positions |
|---|---|---|---|
| SELECT 1 buttons 1999 | manual Select 1 choice button | SELECT 1 |
|
| SELECT 2 1999 | manual select, CV offset other | SELECT 2 | — |
| SELECT 3 1999 | manual select, CV offset other | SELECT 3 | — |
| RATE 1999 | oscillator frequency knob | Oscillator | — |
| LFO 1999 | LFO mode on/off button | Oscillator, LFO filtering |
|
| START 1999 | starts the oscillator button | Oscillator, START OUT | — |
| STOP 1999 | stops the oscillator button | Oscillator | — |
| STEP 1999 | one oscillator cycle button | Oscillator | — |
| FINE TUNE 1999 | oscillator fine tune knob | Oscillator | — |
| FM 1999 | bipolar FM attenuverter knob · bipolar | FM | — |
| OFFSET 1999 | saw offset trim other | Multiplier section | — |
| AMPLITUDE 1999 | saw amplitude trim other | Multiplier section | — |
| STEP TRIM 1999 | step cycle amplitude trim other | Oscillator | — |
| V/OCT trimmer 1999 | V/OCT scaling trim other | V/OCT | — |
Blocks 6
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Oscillator | analogue oscillator | Oscillator | FM, V/OCT, START IN, STOP IN, STEP IN | RATE, FINE TUNE, FM, LFO, START, STOP, STEP | TRIANGLE, SQUARE, START OUT | 1999 |
| Multiplier section | frequency multiplier section | Clock divider / multiplier | REF. IN, x2 IN, x3 IN, x2 IN (2), x5 IN, x2 IN (3), x7 IN, x2 IN (4) | — | OUT 1, OUT 2, OUT 3, OUT 4, OUT 5, OUT 6, OUT 7, OUT 8 | 1999 |
| SELECT 1 | voltage controlled switch | Sequential / voltage-controlled switch | SELECT 1 CV | SELECT 1 buttons | SELECT 1 OUT | 1999 |
| SELECT 2 | voltage controlled switch | Sequential / voltage-controlled switch | SELECT 2 CV | SELECT 2 | SELECT 2 OUT | 1999 |
| SELECT 3 | voltage controlled switch | Sequential / voltage-controlled switch | SELECT 3 CV | SELECT 3 | SELECT 3 OUT | 1999 |
| LFO filtering | output filtering | — | — | LFO | OUT 1, OUT 2, OUT 3, OUT 4, OUT 5, OUT 6, OUT 7, OUT 8, SELECT 1 OUT, SELECT 2 OUT, SELECT 3 OUT | 1999 |
Modes 4
Specs 15
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 18 HP | — | 1999 |
| module | depth | 27 mm | — | 1999 |
| module | +12V current | 235 mA | — | 1999 |
| module | -12V current | 176 mA | — | 1999 |
| module | +5V current | 20 mA | — | 1999 |
| OUT 1-8 | output level | -5 to 5 V | — | 1999 |
| TRIANGLE / SQUARE | output level | -5 to 5 V | — | 1999 |
| START OUT | pulse level | 5 V | — | 1999 |
| SELECT CV | input range | 0 to 5 V | — | 1999 |
| Multiplier section | multiplication | 1 to 8 x | — | 1999 |
| REF. IN | external saw level | -5 to 5 V | — | 1999 |
| V/OCT | accurate tracking range | 4 to 5 octaves | — | 1999 |
| module | warm-up before calibration | 10 to 20 min | — | 1999 |
| inputs | input tolerance | -12 to 12 V | — | 1999 |
| multipliers | x2 stages available | 4 count | — | 1999 |
Properties 14
| Subject | Property | Value | Source |
|---|---|---|---|
| module | circuit | analogue | 1999 |
| Oscillator | main waveform | falling ramp sawtooth | 1999 |
| Multiplier section | output waveform | falling ramp sawtooth | 1999 |
| Multiplier section | available multipliers | x2(x4)/x3/x5/x7 | 1999 |
| Multiplier section | higher multipliers | patchable, e.g. x14 | 1999 |
| Multiplier section | accuracy at high multiples | noise reduces accuracy | 1999 |
| Multiplier section | external source | REF. IN | 1999 |
| SELECT 1-3 | selects | one of 8 outputs | 1999 |
| SELECT 1-3 | manual control | offsets the CV | 1999 |
| Oscillator | V/OCT tracking above range | goes sharp | 1999 |
| STEP IN | edge | positive edge | 1999 |
| HTG link | connection | internal ribbon to Scanner | 1999 |
| FM | attenuverter | bipolar | 1999 |
| inputs | protection | +-12V tolerant | 1999 |
Behavior 16
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| START OUT | START pressed or START IN rises | +5V pulse | — | 1999 |
| STEP IN / STEP | rising edge | one oscillator cycle | — | 1999 |
| START IN | high | oscillator starts | — | 1999 |
| STOP IN | high | oscillator stops | — | 1999 |
| LFO button | pressed | frequency reduced, outputs filtered | LFO mode | 1999 |
| LFO filtering | audio rate use | reduces output amplitude | LFO mode | 1999 |
| REF. IN | unpatched | oscillator saw used | — | 1999 |
| x2/x3/x5/x7 IN | unpatched | REF. IN used | — | 1999 |
| x2 IN (2)/(3)/(4) | unpatched | OUT 2/3/4 used | — | 1999 |
| Multiplier section | external saw at REF. IN | runs without internal oscillator | — | 1999 |
| SELECT manual control | CV patched | acts as offset | — | 1999 |
| HTG link | Scanner connected | OUT 1-8 sent to Scanner | — | 1999 |
| HTG link | HTG stopped | outputs sit near -5V | — | 1999 |
| V/OCT | beyond 4-5 octaves | tracking goes sharp | — | 1999 |
| STEP IN | frequency matched to clock | multiplied outputs in sync | — | 1999 |
| ramp | frequency too low | no 0V crossing | — | 1999 |
Functions 9
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Analog VCO | block | patchable | analogue oscillator with V/OCT | 1999 |
| 1V/Oct Pitch Tracking | jack | patchable | V/OCT input | 1999 |
| Chord / Paraphonic Oscillator | block | patchable | x1-x8 harmonic outputs, harmonic oscillator | 1999 |
| Simultaneous Waveform Outputs | jack | patchable | TRIANGLE, SQUARE, saw outputs | 1999 |
| Master Clock | documented use | patchable | reference clock generator | 2000 |
| Clock Divider / Multiplier | block | patchable | multiplier section x1-x8 | 1999 |
| Sequential / Voltage Switch | block | patchable | 3 voltage controlled switches | 1999 |
| LFO | mode | patchable | LFO mode for modulation | 1999 |
| Gate / Trigger Utility | documented use | patchable | STEP as burst generator | 1999 |
Power
| +12 V | 235 mA |
|---|---|
| −12 V | 176 mA |
| +5 V | 20 mA |
| Width | 18 HP |
| Depth | 27 mm |
Other Analog VCO modules
Sources 2
- [1999]
- [2000]