doepfer/a-110-1

Doepfer A-110-1 Standard VCO Analog VCO

10 HP analog vco by Doepfer: 5 inputs, 4 outputs, 6 controls.

Doepfer · A-110-1 Standard VCO Manual (PDF) ↗

Analog VCO · 1V/Oct Pitch Tracking · Simultaneous Waveform Outputs · Pulse Width Modulation · Oscillator Sync · Exponential FM

Inputs 5

Inputs
JackWhat it doesRangeConnections
SYNC 205hard sync input
audio
—
→ VCO
CV 1 205pitch CV, 1V/oct
pitch, cv
scaling v oct
normalled from System Bus CV
→ VCO
CV 2 205FM / pitch CV
pitch, cv
scaling v oct
→ VCO
attenuated by CV 2
PW CV 1 205PWM input 1
cv
—
→ PW, Square
PW CV 2 205PWM input 2
cv
—
→ PW, Square
attenuated by PW CV 2

The documents don't state: voltage, coupling, impedance (all inputs); scaling (PW CV 1, PW CV 2).

Outputs 4

Outputs
JackWhat it doesRangeConnections
Sawtooth 205sawtooth output
audio
—
from VCO
Square 205square wave output
audio
—
from VCO, waveform converters
Triangle 205triangle wave output
audio
—
from VCO, waveform converters
Sine 205sine wave output
audio
—
from VCO, waveform converters

The documents don't state: coupling, impedance (all outputs).

Controls 6

Controls
ControlWhat it doesAffectsPositions
Range 205octave / footage switch
switch
VCO
  • -2: lowest footage
  • -1: octave down
  • 0: middle footage
  • +1: octave up
  • +2: highest footage
Tune 205fine tuning
knob · -6 to 6 semitones · bipolar
VCO—
CV 2 205CV 2 attenuator
knob
CV 2, VCO—
PW 205manual pulse width
knob
Square—
PW CV 2 205PW CV 2 attenuator
knob
PW CV 2, Square—
INT.CV 206bus CV normalling
jumper
CV 1
  • installed: CV 1 normalled to bus
  • removed: normalling removed

Blocks 2

Blocks and their connections
BlockKindTypesInputsControlsOutputsSource
VCOsawtooth core oscillatorOscillatorSYNC, CV 1, CV 2, PW CV 1, PW CV 2Range, Tune, CV 2, PW, PW CV 2Sawtooth, Square, Triangle, Sine205
waveform convertersinternal waveform converters———Square, Triangle, Sine206

Specs 12

Specs
SubjectQuantityValueConditionSource
VCOfrequency range10 octavesmanual figure205
VCOfrequency range15 to 8000 Hzproduct page figure206
Tunerange-1 to 1 semitonesolder modules206
Tunerange-0.5 to 0.5 octavessince about mid 2015206
Sawtooth, Squareoutput level8 Vpptypical206
Triangle, Sineoutput level10 Vpptypical206
VCOwarm-up time20 min—205
Rangeswitch positions10 positionsonly 5 marked usable206
modulewidth10 HP—206
moduledepth55 mm—206
modulecurrent +12V90 mA—206
modulecurrent -12V20 mA—206

Properties 10

Properties
SubjectPropertyValueSource
CV 1, CV 2combinationsummed205
PW CV 1, PW CV 2combinationsummed205
SYNCsync typehard sync205
CV 2FM typeexponential205
outputspitchidentical205
VCOcore waveformsawtooth206
Triangle, Sinewaveform accuracynotch at peak206
Sineshaperounded triangle206
Sawtoothslopefalling206
CV 1, CV 2tracking1V/octave exactly205

Behavior 5

Behavior rules
SubjectWhenEffectModeSource
CV 1unpatchedfollows System Bus CV—205
CV 1plug insertedbus CV disconnected—205
INT.CV jumperremovedbus normalling removed—206
SYNCmaster cycle startsslave sawtooth resets—205
Rangepositions beyond -2..+2should not be used—206

Functions 6

Function tags
FunctionBasisScopeEvidenceSource
Analog VCOblockpatchableVCO: analog, 1V/octave205
1V/Oct Pitch TrackingjackpatchableCV 1: 1V/octave exactly205
Simultaneous Waveform Outputsjackpatchablesaw, square, triangle, sine outs205
Pulse Width ModulationjackpatchablePW CV 1 / PW CV 2205
Oscillator SyncjackpatchableSYNC: hard sync input205
Exponential FMjackpatchableCV 2: exponential FM205

Power

+12 V90 mA
−12 V20 mA
+5 V—
Width10 HP
Depth55 mm

Other Analog VCO modules

All Analog VCO modules →

Sources 2

  1. [205]
    A-110-1 Standard VCO Manual ↗manual · primary
    ● verified 2026-05-06
  2. [206]
    Doepfer A-110-1 product page ↗product page
    ● verified 2026-05-06