squarp-instruments/rample
Squarp Instruments Rample Sample Player · Lowpass Filter
14 HP sample player and lowpass filter by Squarp Instruments: 9 inputs, 6 outputs, 26 controls, 8 modes.
Squarp Instruments · Rample Manual ↗
Sample Player · Distortion / Saturation · Lowpass Filter · Highpass Filter · Compressor / Dynamics · Freeze / Hold · Mixer · Polyphonic Operation · 1V/Oct Pitch Tracking · Stereo Inputs / Outputs
Inputs 9
| Jack | What it does | Range | Connections |
|---|---|---|---|
| gate input 1 265 | trigger SP1 gate, trigger | — | → SP1 |
| gate input 2 265 | trigger SP2 gate, trigger | — | → SP2 |
| gate input 3 265 | trigger SP3 gate, trigger | — | → SP3 |
| gate input 4 265 | trigger SP4 gate, trigger | — | → SP4 |
| CV input 1 265 | assignable parameter CV cv, pitch, gate | -5 to 5 V, bipolar | → SP1, SP2, SP3, SP4 selected by CV IN = 0V to 5V, CV IN = -5V to 5V In 6 modes
|
| CV input 2 265 | assignable parameter CV cv, pitch, gate | -5 to 5 V, bipolar | → SP1, SP2, SP3, SP4 selected by CV IN = 0V to 5V, CV IN = -5V to 5V In 6 modes
|
| CV input 3 265 | assignable parameter CV cv, pitch, gate | -5 to 5 V, bipolar | → SP1, SP2, SP3, SP4 selected by CV IN = 0V to 5V, CV IN = -5V to 5V In 6 modes
|
| CV input 4 265 | assignable parameter CV cv, pitch, gate | -5 to 5 V, bipolar | → SP1, SP2, SP3, SP4 selected by CV IN = 0V to 5V, CV IN = -5V to 5V In 6 modes
|
| MIDI In 266 | MIDI TRS type A midi | — | → SP1, SP2, SP3, SP4 |
The documents don't state: voltage, polarity (gate input 1, gate input 2, gate input 3, gate input 4); scaling, threshold, coupling, audio rate, impedance (all inputs).
Outputs 6
| Jack | What it does | Range | Connections |
|---|---|---|---|
| SP1 265 | voice 1 audio audio, cv | -5 to 5 V, bipolar coupling dc audio rate yes | from SP1, Compressor |
| SP2 265 | voice 2 audio audio, cv | -5 to 5 V, bipolar coupling dc audio rate yes | from SP2, Compressor |
| SP3 265 | voice 3 audio audio, cv | -5 to 5 V, bipolar coupling dc audio rate yes | from SP3, Compressor |
| SP4 265 | voice 4 audio audio, cv | -5 to 5 V, bipolar coupling dc audio rate yes | from SP4, Compressor |
| mix 265 | mix of unpatched voices audio | audio rate yes | from mix bus |
| MIDI Thru 266 | MIDI thru for chaining midi | — | from MIDI In |
The documents don't state: voltage, polarity, coupling (mix); scaling, impedance (all outputs).
Controls 26
| Control | What it does | Affects | Positions |
|---|---|---|---|
| potentiometer 1 265 | SP1 effect amount knob · bipolar | SP1 | — |
| potentiometer 2 265 | SP2 effect amount knob · bipolar | SP2 | — |
| potentiometer 3 265 | SP3 effect amount knob · bipolar | SP3 | — |
| potentiometer 4 265 | SP4 effect amount knob · bipolar | SP4 | — |
| ① 265 | select Pitch / voice button | Pitch effect |
|
| ② 265 | select Bits / voice button | Bits effect |
|
| ③ 265 | select Filter / voice button | Filter effect |
|
| ④ 265 | select Freeze / voice button | Freeze effect |
|
| assign 265 | CV assign / shift button | CV input 1, CV input 2, CV input 3, CV input 4 | — |
| listen 265 | audition / exit button | SP1, SP2, SP3, SP4 |
|
| encoder 265 | kit select / menu knob | SP1, SP2, SP3, SP4 |
|
| start point 265 | sample start menu setting · 0 to 100 % | SP1 | — |
| length 265 | sample duration menu setting · 0 to 100 % | SP1 | — |
| env 265 | attack / decay menu setting · bipolar | SP1 | — |
| run mode 265 | playback type menu setting | SP1 |
|
| CV IN 265 | CV input range menu setting | CV input 1 |
|
| SLICER 265 | start/length quantizing menu setting | start point, length |
|
| LAYER 265 | default layer mode menu setting | SP1 |
|
| ANTICLIC 265 | start/stop click fade menu setting | SP1 |
|
| PITCH 265 | chromatic pitch quantize menu setting | Pitch effect | — |
| COMPRESS 265 | compressor preset menu setting | Compressor | — |
| % COMPRESS 265 | compressor amount menu setting · 0 to 200 % | Compressor | — |
| SIDECHAIN 265 | compressor sidechain voice menu setting | Compressor | — |
| TAPE 265 | tape amount menu setting · 0 to 127 | Tape | — |
| ASSIGN 265 | CV assign scope menu setting | CV input 1 |
|
| Punch 265 | punch effects mode menu setting | listen |
|
Blocks 12
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| SP1 | sample voice | Sampler | gate input 1 | potentiometer 1 | SP1 | 265 |
| SP2 | sample voice | Sampler | gate input 2 | potentiometer 2 | SP2 | 265 |
| SP3 | sample voice | Sampler | gate input 3 | potentiometer 3 | SP3 | 265 |
| SP4 | sample voice | Sampler | gate input 4 | potentiometer 4 | SP4 | 265 |
| Pitch effect | resample engine | — | — | ① | — | 265 |
| Bits effect | bitcrusher | Distortion / saturation | — | ② | — | 265 |
| Filter effect | DJ-style filter | Filter | — | ③ | — | 265 |
| Freeze effect | loop/repeat effect | — | — | ④ | — | 265 |
| Levels/Drive effect | gain and saturation | Distortion / saturation | — | assign, listen | — | 265 |
| Compressor | master compressor | Compressor / dynamics | — | — | SP1, SP2, SP3, SP4 | 265 |
| Tape | tape wow/flutter | — | — | — | — | 265 |
| mix bus | mix output | Mixer | — | — | mix | 265 |
Modes 8
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| Kit Select | UI mode | — | rotate encoder | 265 |
| Assign Mode | UI mode | assign = press | press assign | 265 |
| layers mode | UI mode | — | press assign then ①-④ | 265 |
| Momentary Mode | performance mode | — | hold ①-④ | 265 |
| Chromatic Mode | MIDI keyboard split | — | Settings SP1-SP4 range | 265 |
| CHORD MIDI MODE | polyphonic MIDI mode | — | voices share octave range | 265 |
| Layers Mode | MIDI keyboard split | — | Settings SP1-SP4 layer range | 265 |
| Punch effects | performance mode | — | Settings Punch enabled | 265 |
Specs 23
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Pitch effect | range | -1 to 1 octaves | — | 265 |
| CV input | V/oct pitch range | 24 semitones | V/oct assignment | 265 |
| CV input | linear pitch | -50 to 100 % | Pitch assignment, -5V to +5V | 265 |
| kits | banks | 26 banks | — | 265 |
| kits | kits per bank | 100 kits | — | 265 |
| kits | max kits | 2600 kits | — | 266 |
| voice | max layers | 12 samples | — | 265 |
| samples | sample rate | 44100 Hz | — | 265 |
| samples | bit depth | 8 to 16 bit | — | 265 |
| samples | minimum length | 50 ms | — | 265 |
| Compressor | amount | 0 to 200 % | — | 265 |
| Compressor | presets | 9 presets | — | 265 |
| Tape | amount | 0 to 127 steps | — | 265 |
| MIDI | note trigger range | 0 to 127 notes | — | 265 |
| DAC | resolution | 16 bit | — | 266 |
| DAC | sample rate | 44.1 kHz | — | 266 |
| ADC | CV input resolution | 12 bit | — | 266 |
| module | width | 14 HP | — | 266 |
| module | depth | 25 mm | — | 266 |
| power | +12V current | 220 mA | — | 266 |
| power | -12V current | 40 mA | — | 266 |
| voices | simultaneous effects | 20 effects | — | 266 |
| stereo | max stereo voices | 2 voices | — | 266 |
Properties 14
| Subject | Property | Value | Source |
|---|---|---|---|
| Pitch effect | interpolator | 6-pole | 265 |
| Bits effect | algorithms | sample rate, resolution reduction | 265 |
| Filter effect | response | low pass, high pass | 265 |
| Filter effect | resonance | low | 265 |
| Freeze effect | algorithms | ping-pong; synced loop | 265 |
| Compressor | processing | per voice | 265 |
| Compressor | presets | nine models | 265 |
| samples | format | .wav mono/stereo | 265 |
| samples | max duration | unlimited | 265 |
| stereo sample | uses | 2 mono voices | 265 |
| CV inputs | assignable to | any effect, any voice | 265 |
| audio outputs | coupling | DC | 266 |
| Tape | modulation | randomized LFO on speed | 265 |
| CV IN | V/oct | modulo, 2-octave wrap | 265 |
Behavior 22
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| SP1-SP4 outputs | unpatched | normalled to mix | — | 265 |
| Freeze effect | potentiometer not at midpoint | freeze enabled | — | 265 |
| T-F CV input | gate detected | freeze enabled | — | 265 |
| V/oct CV | exceeds 2-octave range | octave wraps | — | 265 |
| Drive | potentiometer 0-50% | clean gain increase | — | 265 |
| Drive | potentiometer 50-100% | added analog-style saturation | — | 265 |
| Compressor | % COMPRESS above 0% | compressor enabled | — | 265 |
| SIDECHAIN voice | sidechain enabled | drives compression, uncompressed | — | 265 |
| Sidechain | default | disabled | — | 265 |
| Momentary Mode | button released | effect reverts | — | 265 |
| Momentary Mode | encoder pressed before release | changes applied | — | 265 |
| Punch effects | no buttons pressed | no effects applied | — | 265 |
| Punch effects | voice amount zero | effect not triggered | — | 265 |
| CHORD MIDI MODE | voices share octave range | voice-stealing chord play | — | 265 |
| kit | no voice 1 sample | kit cannot open | — | 265 |
| SD card | no kits | displays 'NO K' | — | 265 |
| LAYER default | kit never stored | voices use default mode | — | 265 |
| MIDI | channel mismatch | messages ignored | — | 265 |
| AUTOSAVE | enabled, at power-up | last kit loaded | — | 265 |
| mute group | trigger sample plays | muted sample stops | — | 265 |
| layers | default | random playback | — | 265 |
| Pitch effect | speed increased | higher pitch, shorter duration | — | 265 |
Functions 10
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Sample Player | block | patchable | blocks SP1-SP4: sample voices | 265 |
| Distortion / Saturation | block | internal | Bits effect: bitcrusher; Drive saturation | 265 |
| Lowpass Filter | block | internal | Filter effect: low pass, CV-assignable | 265 |
| Highpass Filter | block | internal | Filter effect: high pass, CV-assignable | 265 |
| Compressor / Dynamics | block | internal | block Compressor: master compressor | 265 |
| Freeze / Hold | block | internal | Freeze effect: loops playing waveform | 265 |
| Mixer | jack | patchable | jack mix: sums unpatched voices | 265 |
| Polyphonic Operation | mode | patchable | CHORD MIDI MODE: 4-voice polyphonic | 265 |
| 1V/Oct Pitch Tracking | mode | patchable | CV input assigned to V/oct | 265 |
| Stereo Inputs / Outputs | property | patchable | stereo samples on two voices | 266 |
Power
| +12 V | 220 mA |
|---|---|
| −12 V | 40 mA |
| +5 V | — |
| Width | 14 HP |
| Depth | 25 mm |
Other Sample Player modules
Sources 2
-
[265]
Rample Manual ↗manual · primary⚠ verified 2026-05-06 · the manufacturer changed this document since
-
[266]
Squarp Rample product page ↗product page⚠ verified 2026-05-06 · the manufacturer changed this document since