shakmat/dual-dagger
Shakmat Modular Dual Dagger Lowpass Filter · Highpass Filter
6 HP lowpass filter and highpass filter by Shakmat Modular: 7 inputs, 2 outputs, 7 controls, 1 mode.
Shakmat Modular · Dual Dagger Manual (PDF) ↗
Lowpass Filter · Highpass Filter · Bandpass / Notch Filter · Self-Oscillating Filter · Stereo Inputs / Outputs
Inputs 7
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Inputs (ch 1) 792 | channel 1 audio in audio | -5 to 5 V | → HPF 1, LPF 1 |
| Inputs (ch 2) 792 | channel 2 audio in audio | -5 to 5 V | → HPF 2, LPF 2 |
| Low-pass CV input 792 | low-pass cutoff CV cv | — | → LPF 1, LPF 2 In 1 mode
|
| Resonance CV input 792 | resonance CV cv | — | → LPF 1, LPF 2, HPF 1, HPF 2 selected by Low-pass resonance switch = engaged, High-pass resonance switch = engaged |
| High-pass CV input 792 | high-pass cutoff CV cv | — | → HPF 1, HPF 2 In 1 mode
|
| PANLP 792 | low-pass cutoff pan cv | bipolar | → LPF 1, LPF 2 |
| PANHP 792 | high-pass cutoff pan cv | bipolar | → HPF 1, HPF 2 |
The documents don't state: voltage (Low-pass CV input, Resonance CV input, High-pass CV input, PANLP, PANHP); polarity (Inputs (ch 1), Inputs (ch 2), Low-pass CV input, Resonance CV input, High-pass CV input); impedance (all inputs).
Outputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Outputs (ch 1) 792 | channel 1 filtered out audio | — | from LPF 1, HPF 1 |
| Outputs (ch 2) 792 | channel 2 filtered out audio | — | from LPF 2, HPF 2 |
The documents don't state: voltage, polarity, impedance (all outputs).
Controls 7
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Low-pass potentiometer 792 | low-pass cutoff knob | LPF 1, LPF 2 | In 1 mode
|
| Link switch 792 | link LP to HP switch | LPF 1, LPF 2, HPF 1, HPF 2 |
|
| Resonance potentiometer 792 | assignable resonance knob | LPF 1, LPF 2, HPF 1, HPF 2 | — |
| High-pass resonance switch 792 | resonance to HPF switch | HPF 1, HPF 2 |
|
| Low-pass resonance switch 792 | resonance to LPF switch | LPF 1, LPF 2 |
|
| High-pass potentiometer 792 | high-pass cutoff knob | HPF 1, HPF 2 | In 1 mode
|
| Jumper 792 | resonance range jumper | LPF 1, LPF 2, HPF 1, HPF 2 |
|
Blocks 4
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| LPF 1 | low-pass filter | Filter | Inputs (ch 1), Low-pass CV input, PANLP | Low-pass potentiometer, Resonance potentiometer | Outputs (ch 1) | 792 |
| LPF 2 | low-pass filter | Filter | Inputs (ch 2), Low-pass CV input, PANLP | Low-pass potentiometer, Resonance potentiometer | Outputs (ch 2) | 792 |
| HPF 1 | high-pass filter | Filter | Inputs (ch 1), High-pass CV input, PANHP | High-pass potentiometer, Resonance potentiometer | Outputs (ch 1) | 792 |
| HPF 2 | high-pass filter | Filter | Inputs (ch 2), High-pass CV input, PANHP | High-pass potentiometer, Resonance potentiometer | Outputs (ch 2) | 792 |
Modes 1
Specs 8
Properties 6
Behavior 11
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Resonance | LP switch engaged | controls low-pass resonance | — | 792 |
| Resonance | HP switch engaged | controls high-pass resonance | — | 792 |
| Resonance | both switches engaged | affects both sections | — | 792 |
| Link | engaged | low-pass follows high-pass | Link | 792 |
| High-pass control | Link engaged | moves all four filters | Link | 792 |
| Low-pass control | Link engaged | sets bandwidth only | Link | 792 |
| Pan inputs | positive voltage | ch1 cutoff up, ch2 down | — | 792 |
| Pan inputs | negative voltage | ch1 cutoff down, ch2 up | — | 792 |
| PANLP | positive voltage | left opens, right closes | — | 792 |
| Jumper | Lo position | range limited, no self-oscillation | — | 792 |
| Jumper | Hi position | self-oscillation possible | — | 792 |
Functions 5
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Lowpass Filter | block | patchable | blocks LPF 1/2: -24dB/oct low-pass | 792 |
| Highpass Filter | block | patchable | blocks HPF 1/2: -24dB/oct high-pass | 792 |
| Bandpass / Notch Filter | mode | patchable | mode Link: 8th order bandpass | 792 |
| Self-Oscillating Filter | control | patchable | Jumper Hi allows self-oscillation | 792 |
| Stereo Inputs / Outputs | jack | patchable | stereo Inputs/Outputs, two channels | 792 |
Power
| +12 V | 65 mA |
|---|---|
| −12 V | 80 mA |
| +5 V | — |
| Width | 6 HP |
| Depth | 29 mm |
Other Lowpass Filter modules
Sources 2
- [792]
- [793]