setonix-synth/shaka-4
Setonix Synth Shaka-4 VC Stereo Matrix Expander VCA · Mixer
6 HP VCA and mixer by Setonix Synth: 6 inputs, 2 outputs, 4 controls.
Setonix Synth · Shaka-8 / Shaka-4 Matrix Mixer User Manual v01 (PDF) ↗
Inputs 6
| Jack | What it does | Range | Connections |
|---|---|---|---|
| CV Input 1 591 inferred from the documents | matrix point 1 level cv | ≤ 10 V, bipolar scaling exponential impedance 100000 Ω | → Expander column, Initial Level 1 |
| CV Input 2 591 inferred from the documents | matrix point 2 level cv | ≤ 10 V, bipolar scaling exponential impedance 100000 Ω | → Expander column, Initial Level 2 |
| CV Input 3 591 inferred from the documents | matrix point 3 level cv | ≤ 10 V, bipolar scaling exponential impedance 100000 Ω | → Expander column, Initial Level 3 |
| CV Input 4 591 inferred from the documents | matrix point 4 level cv | ≤ 10 V, bipolar scaling exponential impedance 100000 Ω | → Expander column, Initial Level 4 |
| EXPANDER I/O 1 591 | Shaka-8/Shaka-4 chain link | — | — |
| EXPANDER I/O 2 591 | Shaka-8/Shaka-4 chain link | — | — |
The documents don't state: coupling (CV Input 1, CV Input 2, CV Input 3, CV Input 4); audio rate (all inputs).
Outputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Audio Output L 591 inferred from the documents | expander left mix audio | impedance 1000 Ω | from Expander column |
| Audio Output R 591 inferred from the documents | expander right mix audio | impedance 1000 Ω | from Expander column |
The documents don't state: voltage, polarity, coupling (all outputs).
Controls 4
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Initial Level 1 591 inferred from the documents | input 1 send level knob · -100 to 0 dB | Expander column, Audio Output L, Audio Output R | — |
| Initial Level 2 591 inferred from the documents | input 2 send level knob · -100 to 0 dB | Expander column, Audio Output L, Audio Output R | — |
| Initial Level 3 591 inferred from the documents | input 3 send level knob · -100 to 0 dB | Expander column, Audio Output L, Audio Output R | — |
| Initial Level 4 591 inferred from the documents | input 4 send level knob · -100 to 0 dB | Expander column, Audio Output L, Audio Output R | — |
Blocks 1
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Expander column | stereo matrix expander | Expander, Mixer, VCA | CV Input 1, CV Input 2, CV Input 3, CV Input 4 | Initial Level 1, Initial Level 2, Initial Level 3, Initial Level 4 | Audio Output L, Audio Output R | 591 |
Specs 10
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| CV inputs | control voltage range | 0 to 8 V | -100dB to unity | 591 |
| CV inputs | control voltage range | 0 to 10 V | -100dB to +20dB | 591 |
| matrix point | gain range | -100 to 0 dB | Initial knob only | 591 |
| matrix point | maximum gain | ≤ 20 dB | with CV | 591 |
| Audio Inputs | high-pass cutoff (-3dB) | 5 Hz | — | 591 |
| Shaka-8 | max Shaka-4 expanders | ≤ 5 units | — | 591 |
| module | width | 6 HP | — | 591 |
| module | depth | 25 mm | — | 591 |
| module | current +12V | 25 mA | — | 591 |
| module | current -12V | 25 mA | — | 591 |
Properties 9
| Subject | Property | Value | Source |
|---|---|---|---|
| signal path | circuit | all-analog | 591 |
| VCAs | chip | SSI2164 | 591 |
| VCAs | response | exponential | 591 |
| stereo pairs | gain | linked, applied independently | 591 |
| channels | EQ response | more or less flat | 591 |
| CV inputs | combination | summed with Initial knob | 591 |
| CV inputs | bipolar voltages | accepted | 591 |
| Audio Inputs | coupling | AC | 591 |
| matrix | expansion | Shaka-4 expanders, 4x3, 4x4 | 591 |
Behavior 11
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| R Audio Input | unpatched, L patched | normalled to L input | — | 591 |
| matrix point gain | Initial up plus CV | can exceed unity | — | 591 |
| matrix point gain | CV 0-10V applied | up to +20dB | — | 591 |
| VCA sensitivity | greater CV input | higher | — | 591 |
| Audio Inputs | content below 5 Hz | removed | — | 591 |
| Initial Level | full counterclockwise | -100dB | — | 591 |
| Initial Level | fully clockwise | unity gain | — | 591 |
| expander cables | power supply on | do not connect/disconnect | — | 591 |
| Shaka-4 chain | more than 5 units | not recommended | — | 591 |
| Shaka-4 | no Shaka-8 connected | cannot be used | — | 592 |
| EXPANDER I/O | additional Shaka-4 | chain via unused header | — | 591 |
Functions 3
Power
| +12 V | 25 mA |
|---|---|
| −12 V | 25 mA |
| +5 V | — |
| Width | 6 HP |
| Depth | 25 mm |
Other VCA modules
Sources 2
- [591]
-
[592]
Setonix Synth Shaka-4 product page ↗product page⚠ verified 2026-05-21 · the manufacturer changed this document since