morphor/lfo
Morphor LFO LFO
6 HP LFO by Morphor: 2 inputs, 10 outputs, 4 controls, 6 modes.
Inputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| RESET 1 2028 | cycle reset trigger | impedance 100000 Ω | → LFO 1 |
| RESET 2 2028 | cycle reset trigger | impedance 100000 Ω | → LFO 2 |
The documents don't state: voltage, polarity, coupling (all inputs).
Outputs 10
| Jack | What it does | Range | Connections |
|---|---|---|---|
| TRIANGLE WAVE OUTPUT 1 2028 | triangle wave cv, audio | impedance 1000 Ω | from LFO 1 |
| SQUARE WAVE OUTPUT 1 2028 | square wave cv, audio | impedance 1000 Ω | from LFO 1 |
| SINE WAVE OUTPUT 1 2028 | sine wave cv, audio | impedance 1000 Ω | from LFO 1 |
| SAW WAVE OUTPUT 1 2028 | saw wave cv, audio | impedance 1000 Ω | from LFO 1 |
| INVERTED SAW WAVE OUTPUT 1 2028 | inverted saw wave cv, audio | impedance 1000 Ω | from LFO 1 |
| TRIANGLE WAVE OUTPUT 2 2028 | triangle wave cv, audio | impedance 1000 Ω | from LFO 2 |
| SQUARE WAVE OUTPUT 2 2028 | square wave cv, audio | impedance 1000 Ω | from LFO 2 |
| SINE WAVE OUTPUT 2 2028 | sine wave cv, audio | impedance 1000 Ω | from LFO 2 |
| SAW WAVE OUTPUT 2 2028 | saw wave cv, audio | impedance 1000 Ω | from LFO 2 |
| INVERTED SAW WAVE OUTPUT 2 2028 | inverted saw wave cv, audio | impedance 1000 Ω | from LFO 2 |
The documents don't state: voltage, polarity, scaling, coupling (all outputs).
Controls 4
| Control | What it does | Affects | Positions |
|---|---|---|---|
| FREQ 1 2028 | LFO frequency knob | LFO 1 | — |
| FREQUENCY RANGE SWITCH 1 2028 | frequency range switch | LFO 1, FREQ 1 |
|
| FREQ 2 2028 | LFO frequency knob | LFO 2 | — |
| FREQUENCY RANGE SWITCH 2 2028 | frequency range switch | LFO 2, FREQ 2 |
|
Blocks 2
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| LFO 1 | LFO | LFO | RESET 1 | FREQ 1, FREQUENCY RANGE SWITCH 1 | TRIANGLE WAVE OUTPUT 1, SQUARE WAVE OUTPUT 1, SINE WAVE OUTPUT 1, SAW WAVE OUTPUT 1, INVERTED SAW WAVE OUTPUT 1 | 2028 |
| LFO 2 | LFO | LFO | RESET 2 | FREQ 2, FREQUENCY RANGE SWITCH 2 | TRIANGLE WAVE OUTPUT 2, SQUARE WAVE OUTPUT 2, SINE WAVE OUTPUT 2, SAW WAVE OUTPUT 2, INVERTED SAW WAVE OUTPUT 2 | 2028 |
Modes 6
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| HIGH (LFO 1) | frequency range | FREQUENCY RANGE SWITCH 1 = HIGH | switch | 2028 |
| MED (LFO 1) | frequency range | FREQUENCY RANGE SWITCH 1 = MED | switch | 2028 |
| LOW (LFO 1) | frequency range | FREQUENCY RANGE SWITCH 1 = LOW | switch | 2028 |
| HIGH (LFO 2) | frequency range | FREQUENCY RANGE SWITCH 2 = HIGH | switch | 2028 |
| MED (LFO 2) | frequency range | FREQUENCY RANGE SWITCH 2 = MED | switch | 2028 |
| LOW (LFO 2) | frequency range | FREQUENCY RANGE SWITCH 2 = LOW | switch | 2028 |
Specs 12
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 6 HP | — | 2028 |
| module | depth | 25 mm | — | 2029 |
| module | maximum depth | 25 mm | incl. power cable | 2028 |
| module | +12V current | 22 mA | — | 2028 |
| module | -12V current | 22 mA | — | 2028 |
| module | +5V current | 0 mA | — | 2029 |
| LFO | frequency | 15 to 4250 Hz | HIGH range | 2028 |
| LFO | frequency | 1.5 to 425 Hz | MED range | 2028 |
| LFO | frequency | 0.005 to 1.5 Hz | LOW range | 2028 |
| RESET | trigger level | 5 V | — | 2028 |
| inputs | input impedance | 100 kOhm | — | 2028 |
| outputs | output impedance | 1 kOhm | — | 2028 |
Properties 3
Behavior 2
Functions 3
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| LFO | block | patchable | blocks LFO 1/LFO 2 | 2028 |
| Simultaneous Waveform Outputs | jack | patchable | 5 wave outputs per channel | 2028 |
| Oscillator Sync | jack | patchable | RESET: cycle reset input | 2028 |
Power
| +12 V | 22 mA |
|---|---|
| −12 V | 22 mA |
| +5 V | 0 mA |
| Width | 6 HP |
| Depth | 25 mm |
Other LFO modules
Sources 2
- [2028]
- [2029]