make-noise/mimeophon
Make Noise Mimeophon Delay
16 HP delay by Make Noise: 12 inputs, 3 outputs, 12 controls, 8 modes.
Make Noise · / Soundhack Mimeophon Manual (PDF) ↗
Delay · Chorus / Flanger / Phaser · Resonator / physical model · Freeze / Hold · Reverse playback · Tempo / Clock Sync · Stereo Inputs / Outputs · 1V/Oct Pitch Tracking · Clock Divider / Multiplier
Inputs 12
| Jack | What it does | Range | Connections |
|---|---|---|---|
| L (Mono) Input 230 | left/mono signal input audio | — | → Repeats engine |
| R Input 230 | right signal input audio | — | normalled from L (Mono) Input → Repeats engine |
| Mix CV Input 230 | Mix CV cv | — | → Mix Combo Pot attenuated by Mix Combo Pot |
| ZONE CV Input 230 | Zone selection CV cv | 0 to 5 V, unipolar | → Zone attenuated by Zone CV Input Attenuverter |
| Halo CV Input 230 | Halo CV cv | 0 to 5 V, unipolar | → Halo |
| Repeats CV Input 230 | Repeats CV cv | 0 to 5 V, unipolar | → Repeats |
| COLOR CV Input 230 | Color CV cv | — | → COLOR attenuated by COLOR CV Input Attenuverter |
| Rate CV Input 230 | Rate CV cv | 0 to 5 V, unipolar | → Rate attenuated by Rate CV Input Attenuverter |
| microRate Input 230 | doppler modulation cv, pitch, audio | -3 to 3 V, bipolar | → Repeats engine In 2 modes
|
| HOLD Input 230 | toggles HOLD gate | threshold 2.5 V | → HOLD Button |
| FLIP Input 230 | toggles FLIP gate, audio | threshold 2.5 V | → FLIP Button |
| TEMPO Input 230 | clock sync for Rate clock | threshold 2.5 V | → Rate |
The documents don't state: voltage (L (Mono) Input, R Input, Mix CV Input, COLOR CV Input, HOLD Input, FLIP Input, TEMPO Input); polarity (Mix CV Input, COLOR CV Input, HOLD Input, FLIP Input, TEMPO Input); coupling, impedance (all inputs).
Outputs 3
| Jack | What it does | Range | Connections |
|---|---|---|---|
| RATE Output 230 | pulses at Repeat rate trigger, clock | 0 to 8 V, unipolar | from Repeats engine |
| L Output 230 | left signal output audio | — | from Repeats engine, Halo |
| R Output 230 | right signal output audio | — | from Repeats engine, Halo |
The documents don't state: voltage (L Output, R Output); coupling (RATE Output); impedance (all outputs).
Controls 12
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Mix Combo Pot 230 | dry/wet mix knob | L Output, R Output | In 1 mode
|
| Zone 230 | selects Zone knob · 0 to 7 Zone | Repeats engine | — |
| Zone CV Input Attenuverter 230 | Zone CV attenuverter knob · bipolar | ZONE CV Input | — |
| Halo 230 | Halo amount knob | Halo | — |
| Repeats 230 | number of Repeats knob | Repeats engine | In 1 mode
|
| COLOR 230 | Repeats timbre knob | Color, Repeats engine |
|
| COLOR CV Input Attenuverter 230 | Color CV attenuverter knob · bipolar | COLOR CV Input | — |
| Rate 230 | Repeat frequency in Zone knob | Repeats engine | In 2 modes
|
| Rate CV Input Attenuverter 230 | Rate CV attenuverter knob · bipolar | Rate CV Input | — |
| HOLD Button 230 | hold Repeats button | Repeats engine |
|
| FLIP Button 230 | reverse Repeats button | Repeats engine |
|
| SKEW Button 230 | skew L/R Repeats button | Rate |
|
Blocks 3
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Repeats engine | multi-zone color audio repeater | Delay, Chorus / flanger / ensemble, Resonator | L (Mono) Input, R Input, ZONE CV Input, Rate CV Input, Repeats CV Input, COLOR CV Input, microRate Input, HOLD Input, FLIP Input, TEMPO Input, Mix CV Input | Zone, Rate, Repeats, COLOR, HOLD Button, FLIP Button, SKEW Button, Mix Combo Pot | L Output, R Output, RATE Output | 230 |
| Halo | stereo smear | — | Halo CV Input | Halo | L Output, R Output | 230 |
| Color | feedback timbre | — | COLOR CV Input | COLOR, COLOR CV Input Attenuverter | — | 230 |
Modes 8
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| Skew | stereo rate skew | SKEW Button = press | press SKEW | 230 |
| Ping Pong | stereo bounce | SKEW Button = hold, unskewed | hold SKEW when not skewed | 230 |
| Swap | swapped feedback paths | SKEW Button = hold, skewed | hold SKEW when skewed | 230 |
| HOLD | non-destructive loop hold | HOLD Button = on | button or HOLD Input gate | 230 |
| FLIP | reverse repeats | FLIP Button = on | button or FLIP Input gate | 230 |
| Tempo sync | clocked Rate | — | clock patched to TEMPO Input | 230 |
| Zone 0 | shortest Zone | Zone = 0 | Zone knob or CV | 230 |
| Zones 1-7 | longer Zones | Zone = 1-7 | Zone knob or CV | 230 |
Specs 18
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Zone 0 | Rate range | 1.3 to 20.4 ms | TEMPO unpatched | 230 |
| Zone 1 | Rate range | 20.4 to 81.6 ms | TEMPO unpatched | 230 |
| Zone 2 | Rate range | 81.6 to 326.5 ms | TEMPO unpatched | 230 |
| Zone 3 | Rate range | 163.3 to 653.1 ms | TEMPO unpatched | 230 |
| Zone 4 | Rate range | 326.5 to 1306 ms | TEMPO unpatched | 230 |
| Zone 5 | Rate range | 653.1 to 2612 ms | TEMPO unpatched | 230 |
| Zone 6 | Rate range | 1306 to 5225 ms | TEMPO unpatched | 230 |
| Zone 7 | Rate range | 2612 to 41796 ms | TEMPO unpatched | 230 |
| TEMPO Input | usable range | 0.25 to 50 Hz | — | 230 |
| Tempo sync | Rate multiplier range | 0.5 to 2 x | Full CW /2 to CCW x2 | 230 |
| Zone 0 | Rate range | 4 octaves | — | 230 |
| input gain | level | -3 to 6 dB | — | 230 |
| Repeats | count | ≥ 1 repeats | up to infinite | 230 |
| L/R inputs/outputs | signal level | 10 Vpp | typical | 230 |
| module | width | 16 HP | — | 230 |
| module | max depth | 45 mm | — | 231 |
| power | +12V current | 100 mA | — | 230 |
| power | -12V current | 10 mA | — | 230 |
Properties 16
| Subject | Property | Value | Source |
|---|---|---|---|
| Zones | structure | nested, shortest to longest | 230 |
| Zones | writing | input written to all | 230 |
| Zones 2-7 | rate overlap | 50% with adjacent | 230 |
| Zones | range ratio | 2, 4 or 8x | 230 |
| microRate Input | response Zones 1-7 | linear | 230 |
| microRate Input | response Zone 0 | 1V/oct exponential | 230 |
| microRate Input | gain | unity | 230 |
| COLOR | unity position | ~3:00 | 230 |
| COLOR | modulation | cumulative | 230 |
| Zone Window | indicates | selected Zone color | 230 |
| input gain BLUE | level | -3dB | 230 |
| input gain GREEN | level | 0dB unity | 230 |
| input gain ORANGE | level | +3dB | 230 |
| input gain RED | level | +6dB | 230 |
| Mimeophon | algorithm | color coded, modeless | 230 |
| HOLD | manipulation | non-destructive | 230 |
Behavior 30
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| R Input | unpatched | normalled to L Input | — | 230 |
| Mix Combo Pot | Mix CV patched | attenuates Mix CV | — | 230 |
| Rate | Repeats above zero, changed | doppler pitch shift | — | 230 |
| Rate | TEMPO clocked | slew-less crossfade, no doppler | — | 230 |
| Rate | Skew on | L/R rates move oppositely | — | 230 |
| Skew | turned off | Skew retained, tandem control | — | 230 |
| Skew | smallest two Zones | one side hits minimum early | — | 230 |
| Ping Pong | engaged | inputs summed to mono | — | 230 |
| Ping Pong | engaged | repeats bounce left/right | — | 230 |
| Ping Pong/Swap | engaged | Zone Window flashes | — | 230 |
| Ping Pong/Swap | SKEW pressed again | disengaged | — | 230 |
| Swap | engaged | L/R feedback paths swapped | — | 230 |
| microRate Input | Zones 1-7, Skew on | inverted on right channel | — | 230 |
| microRate Input | Zone 0 | not affected by Skew | — | 230 |
| TEMPO Input | clock read | 1/1 at ~12:30 Rate | — | 230 |
| TEMPO Input | no clock several seconds | sync kept until Rate moves | — | 230 |
| TEMPO Input | two pulses received | tempo established | — | 230 |
| RATE Output | Skew on | both channel rates OR'ed | — | 230 |
| RATE Output | Zone 0, some Zone 1 | stays high | — | 230 |
| HOLD | engaged | input ignored, repeats continue | — | 230 |
| HOLD | engaged | Repeats sets start point | — | 230 |
| HOLD Input | gate ≥2.5V | toggles HOLD | — | 230 |
| FLIP Input | gate ≥2.5V | toggles FLIP | — | 230 |
| FLIP | medium and large Zones | repeats reversed | — | 230 |
| FLIP | smallest two Zones | Total Protonic Reversal distortion | — | 230 |
| Rate modulation | FLIP engaged | no doppler shifting | — | 230 |
| Halo | increased toward max | halos injected into feedback | — | 230 |
| COLOR | always | controls Halo timbre | — | 230 |
| Repeats in smaller Zones | always | written into larger Zones | — | 230 |
| input gain setting | powered off | saved (fw mp82) | — | 230 |
Functions 9
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Delay | block | patchable | Repeats engine: color audio repeater | 230 |
| Chorus / Flanger / Phaser | documented use | patchable | documented: morph Flange, Chorus; doppler chorus | 230 |
| Resonator / physical model | documented use | patchable | documented: Karplus Strong tone generation, Zone 0 | 230 |
| Freeze / Hold | jack | patchable | HOLD Input/Button: hold Repeats indefinitely | 230 |
| Reverse playback | jack | patchable | FLIP Input/Button: reverse Repeats | 230 |
| Tempo / Clock Sync | jack | patchable | TEMPO Input: Rate synced to clock | 230 |
| Stereo Inputs / Outputs | jack | patchable | L/R Inputs and Outputs | 230 |
| 1V/Oct Pitch Tracking | jack | patchable | microRate Input: 1V/oct in Zone 0 | 230 |
| Clock Divider / Multiplier | documented use | patchable | RATE Output: dual clock divider or multiplier | 230 |
Power
| +12 V | 100 mA |
|---|---|
| −12 V | 10 mA |
| +5 V | — |
| Width | 16 HP |
| Depth | 45 mm |
Other Delay modules
Firmware 3
| Version | Released | Notes |
|---|---|---|
| mp86 | — | Contains all previous version changes. Reduces the module's noise floor. Required for units with serial number below #9256.230 |
| mp82 | — | Mimeophon will now save current Input Gain Level setting when powered off. Required for units with serial number below #6339.230 |
| mp70 | — | Adds ability to clear all Zones by setting Mix and Repeats fully counterclockwise. Required for units with serial number below #1000.230 |
Sources 2
- [230]
-
[231]
Make Noise Mimeophon product page ↗product page⚠ verified 2026-05-06 · the manufacturer changed this document since