make-noise/maths
Make Noise Maths Function Generator · Looping / Cycling Envelope
20 HP function generator and looping / cycling envelope by Make Noise: 14 inputs, 11 outputs, 12 controls, 3 modes.
Make Noise · Maths Operation Manual (2013) (PDF) ↗
Function Generator · Looping / Cycling Envelope · End-of-Cycle / End-of-Rise Output · Slew Limiter · Attenuverter / Offset · Mixer · Voltage Math / Precision Adder · Envelope Follower · Clock Divider / Multiplier · Gate / Trigger Utility · LFO · ADSR Envelope · Master Clock
Inputs 14
| Jack | What it does | Range | Connections |
|---|---|---|---|
| CH1 Signal In 500 | signal input cv, audio, gate | -10 to 10 V, bipolar coupling dc | → Channel 1, SUM bus, OR bus |
| CH1 Trigger In 500 | trigger input trigger, gate | — | → Channel 1 |
| CH1 Rise CV In 500 | Rise CV cv | scaling linear | → CH1 Rise |
| CH1 Both CV In 500 | Both CV (entire function) cv | -8 to 8 V, bipolar scaling exponential | → CH1 Rise, CH1 Fall |
| CH1 Fall CV In 500 | Fall CV cv | -8 to 8 V, bipolar scaling linear | → CH1 Fall |
| CH1 Cycle In 500 | cycle on/off gate | threshold 2.5 V | → Channel 1 |
| CH4 Signal In 500 | signal input cv, audio, gate | -10 to 10 V, bipolar coupling dc | → Channel 4, SUM bus, OR bus |
| CH4 Trigger In 500 | trigger input trigger, gate | — | → Channel 4 |
| CH4 Rise CV In 500 inferred from the documents | Rise CV cv | scaling linear | → CH4 Rise |
| CH4 Both CV In 500 | Both CV (entire function) cv | -8 to 8 V, bipolar scaling exponential | → CH4 Rise, CH4 Fall |
| CH4 Fall CV In 500 | Fall CV cv | -8 to 8 V, bipolar scaling linear | → CH4 Fall |
| CH4 Cycle In 500 | cycle on/off gate | threshold 2.5 V | → Channel 4 |
| CH2 Signal In 500 | signal input cv, audio | -10 to 10 V, bipolar coupling dc | normalled from +10V → Channel 2 attenuated by CH2 Attenuverter |
| CH3 Signal In 500 | signal input cv, audio | -10 to 10 V, bipolar coupling dc | normalled from +5V → Channel 3 attenuated by CH3 Attenuverter |
The documents don't state: voltage (CH1 Trigger In, CH1 Cycle In, CH4 Trigger In, CH4 Cycle In); threshold (CH1 Trigger In, CH4 Trigger In).
Outputs 11
| Jack | What it does | Range | Connections |
|---|---|---|---|
| CH1 EOR 500 | end of rise gate, trigger | 0 to 10 V, unipolar | from Channel 1 |
| CH1 Unity Out 500 | unity signal output cv, audio | 0 to 8 V, unipolar | from Channel 1 In 2 modes
|
| CH4 EOC 500 | end of cycle gate, trigger | 0 to 10 V, unipolar | from Channel 4 |
| CH4 Unity Out 500 | unity signal output cv, audio | 0 to 8 V, unipolar | from Channel 4 In 2 modes
|
| CH1 Variable Out 500 | variable output cv, audio | -10 to 10 V, bipolar | from Channel 1 attenuated by CH1 Attenuverter |
| CH2 Variable Out 500 | variable output cv, audio | -10 to 10 V, bipolar | from Channel 2 attenuated by CH2 Attenuverter |
| CH3 Variable Out 500 | variable output cv, audio | -10 to 10 V, bipolar | from Channel 3 attenuated by CH3 Attenuverter |
| CH4 Variable Out 500 | variable output cv, audio | -10 to 10 V, bipolar | from Channel 4 attenuated by CH4 Attenuverter |
| OR Out 500 | analog OR output cv | 0 to 10 V, unipolar | from OR bus |
| SUM Out 500 | sum output cv, audio | -10 to 10 V, bipolar | from SUM bus |
| INV Out 500 | inverted sum output cv, audio | -10 to 10 V, bipolar | from SUM bus |
Controls 12
| Control | What it does | Affects | Positions |
|---|---|---|---|
| CH1 Rise 500 | rise time knob | Channel 1 | — |
| CH1 Fall 500 | fall time knob | Channel 1 | — |
| CH1 Vari-Response 500 | response curve knob | Channel 1 |
|
| CH1 Cycle 500 | cycle on/off button | Channel 1 |
|
| CH1 Attenuverter 500 | scale / invert knob · bipolar | CH1 Variable Out, SUM bus, OR bus | — |
| CH4 Rise 500 | rise time knob | Channel 4 | — |
| CH4 Fall 500 | fall time knob | Channel 4 | — |
| CH4 Vari-Response 500 | response curve knob | Channel 4 |
|
| CH4 Cycle 500 | cycle on/off button | Channel 4 |
|
| CH4 Attenuverter 500 | scale / invert knob · bipolar | CH4 Variable Out, SUM bus, OR bus | — |
| CH2 Attenuverter 500 | scale/invert/offset knob · bipolar | CH2 Variable Out, SUM bus, OR bus | — |
| CH3 Attenuverter 500 | scale/invert/offset knob · bipolar | CH3 Variable Out, SUM bus, OR bus | — |
Blocks 6
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Channel 1 | function generator | Function generator, Envelope generator, Slew limiter / lag, LFO, Attenuverter / offset | CH1 Signal In, CH1 Trigger In, CH1 Rise CV In, CH1 Both CV In, CH1 Fall CV In, CH1 Cycle In | CH1 Rise, CH1 Fall, CH1 Vari-Response, CH1 Cycle, CH1 Attenuverter | CH1 EOR, CH1 Unity Out, CH1 Variable Out | 500 |
| Channel 4 | function generator | Function generator, Envelope generator, Slew limiter / lag, LFO, Attenuverter / offset | CH4 Signal In, CH4 Trigger In, CH4 Rise CV In, CH4 Both CV In, CH4 Fall CV In, CH4 Cycle In | CH4 Rise, CH4 Fall, CH4 Vari-Response, CH4 Cycle, CH4 Attenuverter | CH4 EOC, CH4 Unity Out, CH4 Variable Out | 500 |
| Channel 2 | attenuverter / offset | Attenuverter / offset | CH2 Signal In | CH2 Attenuverter | CH2 Variable Out | 500 |
| Channel 3 | attenuverter / offset | Attenuverter / offset | CH3 Signal In | CH3 Attenuverter | CH3 Variable Out | 500 |
| SUM bus | analog SUM circuit | Mixer, CV processor / math | CH1 Variable Out, CH2 Variable Out, CH3 Variable Out, CH4 Variable Out | — | SUM Out, INV Out | 500 |
| OR bus | analog OR circuit | CV processor / math, Logic | CH1 Variable Out, CH2 Variable Out, CH3 Variable Out, CH4 Variable Out | — | OR Out | 500 |
Modes 3
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| Cycle | cycling LFO | CH1 Cycle = on | Cycle button or Cycle In high | 500 |
| Triggered function | one-shot envelope | — | Trigger In pulse | 500 |
| Signal processing | slew / lag | — | patch Signal In | 500 |
Specs 11
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Channels 1/4 | function time | ≤ 25 min | full CW plus external CV | 500 |
| Channels 1/4 | max frequency | 1000 Hz | — | 500 |
| Channel 2 | offset range | -10 to 10 V | CH2 Signal In unpatched | 500 |
| Channel 3 | offset range | -5 to 5 V | CH3 Signal In unpatched | 500 |
| Triggered function | output range | 0 to 10 V | — | 500 |
| Unity LED | indication range | -8 to 8 V | — | 500 |
| module | width | 20 HP | — | 501 |
| module | depth | 32 mm | — | 501 |
| module | +12V current | 60 mA | — | 500 |
| module | -12V current | 50 mA | — | 500 |
| Flip-flop patch | memory duration | 3 min | — | 500 |
Properties 16
| Subject | Property | Value | Source |
|---|---|---|---|
| Vari-Response | curve range | log to hyper-exponential | 500 |
| Both CV In | response | exponential, inverse | 500 |
| Rise/Fall CV In | response | linear | 500 |
| Triggered function | sustain | none | 500 |
| OR bus | function | maximum voltage selector | 500 |
| OR Out | negative voltages | not passed | 500 |
| Signal inputs | coupling | direct coupled | 500 |
| Unity Out | attenuverter | not affected | 500 |
| Unity Out | bus normalization | not normalled to buses | 500 |
| Variable outputs | bus normalization | normalled to SUM/OR | 500 |
| CH1 vs CH4 | pulse output | EOR vs EOC | 500 |
| Vari-Response | affects | rise and fall times | 500 |
| module | reverse power protection | yes | 500 |
| Channels 1/4 | envelope follower | via Signal In patch | 500 |
| Unity LED | color | green positive, red negative | 500 |
| SUM Bus LEDs | color | green positive, red negative | 500 |
Behavior 27
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Trigger In | arrives during Rise | ignored | — | 500 |
| Trigger In | arrives during Fall | retriggers | — | 500 |
| Trigger In | received | fires regardless of Signal In | — | 500 |
| Cycle In | gate high | cycles | — | 500 |
| Cycle In | gate low, button off | does not cycle | — | 500 |
| Cycle In | gate low, button on | cycles | — | 500 |
| Rise CV In | positive CV | increases rise time | — | 500 |
| Fall CV In | positive CV | increases fall time | — | 500 |
| Fall CV In | negative CV | decreases fall time | — | 500 |
| Both CV In | positive CV | shorter total time | — | 500 |
| Both CV In | negative CV | longer total time | — | 500 |
| Variable Out | cable inserted | removed from SUM/OR | — | 500 |
| Variable Out | unpatched | injected into SUM/OR | — | 500 |
| Unity Out | patched | stays on SUM/OR | — | 500 |
| CH2 Signal In | unpatched | +10V offset generated | — | 500 |
| CH3 Signal In | unpatched | +5V offset generated | — | 500 |
| EOR | no activity | defaults low | — | 500 |
| EOR | Rise portion ends | goes high | — | 500 |
| EOC | no activity | defaults high | — | 500 |
| EOC | Fall portion ends | goes high | — | 500 |
| Signal In | gate patched | ASR envelope | — | 500 |
| Signal In | external CV changes | slewed by Rise/Fall | — | 500 |
| Channels 1/4 | asked to speed signal | cannot; only slows | — | 500 |
| OR Out | negative input voltages | ignored | — | 500 |
| SUM/OR Out | unused CH2/CH3 off-center | unwanted offset added | — | 500 |
| Clock divider patch | width exceeds division | output stays high | — | 500 |
| Cycle In | below +2.5V | reads LOW | — | 500 |
Functions 13
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Function Generator | block | patchable | block Channel 1 / Channel 4: function generator (Rise/Fall/Vari-Response) | 500 |
| Looping / Cycling Envelope | control | patchable | control CH1/CH4 Cycle + jack Cycle In: self-cycles ("When you want an LFO, make MATHS Cycle") | 500 |
| End-of-Cycle / End-of-Rise Output | jack | patchable | jacks CH1 EOR (end of rise), CH4 EOC (end of cycle) | 500 |
| Slew Limiter | mode | patchable | mode Signal processing via Signal In: Lag, Slew or Portamento | 500 |
| Attenuverter / Offset | control | patchable | controls CH1-CH4 Attenuverter: bipolar scale / attenuate / invert | 500 |
| Mixer | block | patchable | block SUM bus: analog SUM circuit -> SUM Out / INV Out | 500 |
| Voltage Math / Precision Adder | block | patchable | block OR bus: maximum voltage selector, half/full-wave rectification -> OR Out | 500 |
| Envelope Follower | documented use | patchable | documented: Envelope Follower patch (Signal In CH1/4, output Signal Out or OR Out) | 500 |
| Clock Divider / Multiplier | documented use | patchable | documented: Voltage Controlled Clock Divider (Trigger In, divisor set by Rise) | 500 |
| Gate / Trigger Utility | documented use | patchable | documented: Voltage Controlled Pulse Delay Processor (Trigger In -> EOR; Rise = delay, Fall = width) | 500 |
| LFO | documented use | patchable | documented: Cycle button/Cycle In 'aka LFO. Use for LFO, Clock, VCO'; 'When you want an LFO, make MATHS Cycle' (Triangle / Ramp LFO patches) | 500 |
| ADSR Envelope | documented use | patchable | documented: Trigger In -> 0-10V function 'aka Envelope' (Attack/Decay EG), Signal In gate -> A/S/R EG, on Unity / Variable Out | 500 |
| Master Clock | documented use | patchable | documented: Typical Voltage Controlled Pulse/Clock with Run/Stop (cycling channel, output from EOC/EOR, Cycle In = run/stop) | 500 |
Power
| +12 V | 60 mA |
|---|---|
| −12 V | 50 mA |
| +5 V | — |
| Width | 20 HP |
| Depth | 32 mm |
Other Function Generator modules
Sources 2
- [500]
-
[501]
Make Noise Maths product page ↗product page⚠ verified 2026-05-18 · the manufacturer changed this document since