joranalogue/warp-1
Joranalogue Audio Design Warp 1 Mixer · Logic Gates
8 HP mixer and logic gates by Joranalogue Audio Design: 7 inputs, 3 outputs, 7 controls, 3 modes.
Joranalogue Audio Design · joranalogue Warp 1 manual (PDF) ↗
Distortion / Saturation · Logic Gates · Mixer · Voltage Math / Precision Adder
Inputs 7
| Jack | What it does | Range | Connections |
|---|---|---|---|
| IN 1 1290 | signal input audio, cv | coupling dc audio rate yes impedance 100000 Ω | → mixer |
| IN 2 1290 | signal input audio, cv | coupling dc audio rate yes impedance 100000 Ω | → mixer |
| EXP. 1290 | exponent CV cv | scaling exponential impedance 100000 Ω | → exponentiator, EXPONENT |
| D/H 1290 | direct/hyper gate gate | threshold 3 V impedance 100000 Ω | → exponentiator, DIRECT/HYPER |
| SCALE 1290 | scale CV cv | impedance 100000 Ω | → exponentiator, SCALE |
| CLIP- 1290 | negative clip CV cv | impedance 100000 Ω | → precision clipper, CLIP- |
| CLIP+ 1290 | positive clip CV cv | impedance 100000 Ω | → precision clipper, CLIP+ |
The documents don't state: voltage (all inputs); polarity (IN 1, IN 2, EXP., CLIP-, CLIP+); scaling (SCALE, CLIP-, CLIP+).
Outputs 3
| Jack | What it does | Range | Connections |
|---|---|---|---|
| OUT 1290 | shaped clipped output audio, cv | coupling dc audio rate yes impedance 0 Ω | from precision clipper |
| INV. 1290 | inverted output audio, cv | coupling dc audio rate yes impedance 0 Ω | from precision clipper |
| POL. 1290 | polarity gate gate | 0 to 5 V, unipolar audio rate yes impedance 1000 Ω | from mixer |
The documents don't state: voltage (OUT, INV.).
Controls 7
| Control | What it does | Affects | Positions |
|---|---|---|---|
| EXPONENT 1290 | exponent knob · 10 to 0.1 exponent (log) | exponentiator | — |
| DIRECT/HYPER 1290 | exponent polarity switch | exponentiator |
|
| ABS. 1290 | absolute value switch | exponentiator, OUT |
|
| SYMMETRY 1290 | input DC offset knob · -5 to 5 V · bipolar | mixer | — |
| SCALE 1290 | scaling factor knob · 0.5 to 10 V | exponentiator | — |
| CLIP- 1290 | negative clip level knob · -10 to 0 V | precision clipper | — |
| CLIP+ 1290 | positive clip level knob · 0 to 10 V | precision clipper | — |
Blocks 3
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| mixer | input mixer | Mixer | IN 1, IN 2 | SYMMETRY | POL. | 1290 |
| exponentiator | power function waveshaper | Waveshaper / wavefolder | EXP., D/H, SCALE | EXPONENT, DIRECT/HYPER, ABS., SCALE | — | 1290 |
| precision clipper | precision clipper | Waveshaper / wavefolder, CV processor / math | CLIP-, CLIP+ | CLIP-, CLIP+ | OUT, INV. | 1290 |
Modes 3
Specs 21
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 8 HP | — | 1290 |
| module | depth | 30 mm | including power cable | 1290 |
| module | +12V current | 60 mA | — | 1290 |
| module | -12V current | 60 mA | — | 1290 |
| product page | +12V current | 65 mA | product page figure | 1291 |
| EXPONENT | exponent range | 0.1 to 10 exponent | direct mode | 1290 |
| EXPONENT | exponent range | -10 to -0.1 exponent | hyper mode | 1290 |
| EXP. | CV response | -1 decade per 5 V | — | 1290 |
| SYMMETRY | offset range | -5 to 5 V | — | 1290 |
| SCALE | scale range | 0.5 to 10 V | — | 1290 |
| scale factor | minimum final value | ≥ 1 V | knob plus CV | 1290 |
| CLIP- | clip level range | -10 to 0 V | — | 1290 |
| CLIP+ | clip level range | 0 to 10 V | — | 1290 |
| D/H | Schmitt low threshold | 2 V | — | 1290 |
| D/H | Schmitt high threshold | 3 V | — | 1290 |
| inputs | input impedance | 100 kΩ | — | 1290 |
| POL. | output impedance | 1 kΩ | — | 1290 |
| OUT, INV. | output impedance | 0 Ω | impedance compensated | 1290 |
| module | outer dimensions depth | 43 mm | — | 1290 |
| module | outer width | 50.5 mm | — | 1290 |
| module | mass | 115 g | — | 1290 |
Properties 15
| Subject | Property | Value | Source |
|---|---|---|---|
| module | circuitry | analogue computing | 1290 |
| signal path | coupling | DC-coupled | 1290 |
| IN 1, IN 2 | combination | summed | 1290 |
| exponentiator | transfer function | power function | 1290 |
| EXPONENT | taper | logarithmic | 1290 |
| EXP. | below 0.1 exponent | reachable via CV | 1290 |
| exponentiator | upper exponent limit | 10 | 1290 |
| hyper mode | clipping | inevitable | 1290 |
| POL. | acts as | comparator vs 0 V | 1290 |
| INV. | signal | inverted OUT copy | 1290 |
| input LED | colours | red positive, blue negative | 1290 |
| output LED | colours | red positive, blue negative | 1290 |
| CLIPPER LED | colours | blue, red, white | 1290 |
| module | frequency range | DC to supersonic | 1290 |
| module | power protection | reverse polarity MOSFET | 1290 |
Behavior 17
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| exponentiator | EXPONENT centred, direct mode | input passed unchanged | direct | 1290 |
| EXPONENT | turned left | concave curves, thinner sound | direct | 1290 |
| EXPONENT | turned right | convex curves, soft clipping | direct | 1290 |
| EXPONENT | fully clockwise | approaches square wave | direct | 1290 |
| EXP. | CV rises 5 V | exponent ten times smaller | — | 1290 |
| D/H | gate high | inverts switch-selected mode | — | 1290 |
| ABS. | enabled | negative excursions inverted positive | absolute value | 1290 |
| CLIP- | ABS. enabled | negative clipping never occurs | absolute value | 1290 |
| SCALE | ≈5 V, 10 Vpp input | output amplitude constant | direct | 1290 |
| scale factor | knob plus CV below 1 V | limited to above 1 V | — | 1290 |
| clip boundaries | knob plus CV cross 0 V | never cross 0 V | — | 1290 |
| POL. | combined input positive | +5 V | — | 1290 |
| POL. | combined input negative | 0 V | — | 1290 |
| CLIPPER LED | clipped at negative boundary | lights blue | — | 1290 |
| CLIPPER LED | clipped at positive boundary | lights red | — | 1290 |
| CLIPPER LED | no clipping | lights white | — | 1290 |
| output | hyper mode | much louder, sharp swings | hyper | 1290 |
Functions 4
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Distortion / Saturation | block | patchable | exponentiator and precision clipper | 1290 |
| Logic Gates | jack | patchable | POL.: polarity comparator gate | 1290 |
| Mixer | block | patchable | mixer: summed IN 1, IN 2 | 1290 |
| Voltage Math / Precision Adder | control | patchable | ABS.: absolute value rectifier | 1290 |
Power
| +12 V | 60 mA |
|---|---|
| −12 V | 60 mA |
| +5 V | — |
| Width | 8 HP |
| Depth | 30 mm |
Other Mixer modules
Sources 2
- [1290]
- [1291]