joranalogue/switch-4
Joranalogue Audio Design Switch 4 Sequential / Voltage Switch
8 HP sequential / voltage switch by Joranalogue Audio Design: 4 inputs, 6 outputs, 8 controls.
Joranalogue Audio Design · Switch 4 User Manual (PDF) ↗
Sequential / Voltage Switch · Multiple / Buffered Mult · Manual Controller
Inputs 4
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Input A 537 | signal input audio, cv, gate, trigger | impedance 100000 Ω | normalled from +5V → Switching section, Routing section |
| Input B 537 | signal input audio, cv, gate, trigger | impedance 100000 Ω | normalled from Input A → Switching section, Routing section |
| Input C 537 | signal input audio, cv, gate, trigger | impedance 100000 Ω | normalled from Input B → Switching section, Routing section |
| Input D 537 | signal input audio, cv, gate, trigger | impedance 100000 Ω | normalled from Input C → Switching section, Routing section |
The documents don't state: voltage, coupling (all inputs).
Outputs 6
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Signal output A 537 | switched output audio, cv, gate, trigger | impedance 0 Ω | from Switching section selected by Toggle switch A = up, Toggle switch A = down |
| Signal output B 537 | switched output audio, cv, gate, trigger | impedance 0 Ω | from Switching section selected by Toggle switch B = up, Toggle switch B = down |
| Signal output C 537 | switched output audio, cv, gate, trigger | impedance 0 Ω | from Switching section selected by Toggle switch C = up, Toggle switch C = down |
| Signal output D 537 | switched output audio, cv, gate, trigger | impedance 0 Ω | from Switching section selected by Toggle switch D = up, Toggle switch D = down |
| Routing output 1 537 | routed output audio, cv, gate, trigger | impedance 0 Ω | from Routing section selected by Rotary switch 1 = A–D, Routing toggle switch 1 = up, Routing toggle switch 1 = down |
| Routing output 2 537 | routed output audio, cv, gate, trigger | impedance 0 Ω | from Routing section selected by Rotary switch 2 = A–D, Routing toggle switch 2 = up, Routing toggle switch 2 = down |
The documents don't state: voltage (all outputs).
Controls 8
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Toggle switch A 537 | make/break signal switch | Switching section, Signal output A |
|
| Toggle switch B 537 | make/break signal switch | Switching section, Signal output B |
|
| Toggle switch C 537 | make/break signal switch | Switching section, Signal output C |
|
| Toggle switch D 537 | make/break signal switch | Switching section, Signal output D |
|
| Rotary switch 1 537 | input selection switch | Routing section, Routing output 1 |
|
| Routing toggle switch 1 537 | make/break routed signal switch | Routing section, Routing output 1 |
|
| Rotary switch 2 537 | input selection switch | Routing section, Routing output 2 |
|
| Routing toggle switch 2 537 | make/break routed signal switch | Routing section, Routing output 2 |
|
Blocks 2
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Switching section | switching section | — | Input A, Input B, Input C, Input D | Toggle switch A, Toggle switch B, Toggle switch C, Toggle switch D | Signal output A, Signal output B, Signal output C, Signal output D | 537 |
| Routing section | routing section | — | Input A, Input B, Input C, Input D | Rotary switch 1, Rotary switch 2, Routing toggle switch 1, Routing toggle switch 2 | Routing output 1, Routing output 2 | 537 |
Specs 9
Properties 6
Behavior 6
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Input A | unpatched | +5 V normal | — | 537 |
| Inputs B–D | unpatched | normalled from input above | — | 537 |
| Toggle switch | up | signal passed, latched | — | 537 |
| Toggle switch | down | signal passed, momentary | — | 537 |
| Toggle switch | centre | connection interrupted | — | 537 |
| Rotary switch | set to input | input sent to toggle | — | 537 |
Functions 3
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Sequential / Voltage Switch | block | patchable | routing section rotary switches | 537 |
| Multiple / Buffered Mult | documented use | patchable | documented: switched multiples | 537 |
| Manual Controller | documented use | patchable | documented: manual gates via +5 V | 537 |
Power
| +12 V | 25 mA |
|---|---|
| −12 V | 25 mA |
| +5 V | — |
| Width | 8 HP |
| Depth | 30 mm |
Other Sequential / Voltage Switch modules
Firmware 3
| Version | Released | Notes |
|---|---|---|
| Rev D | — | Eliminated the possibility of glitches appearing on the routing outputs while turning the corresponding rotary switches.537 |
| Rev C | — | Added +5 V normalisation on input A and output impedance compensation. Current draw increased from ±10 mA to ±25 mA.537 |
| Rev B | — | Initial release.537 |
Sources 2
- [537]
-
[538]
Joranalogue Audio Design Switch 4 product page ↗product page⚠ verified 2026-05-19 · the manufacturer changed this document since