intellijel/triplatt
Intellijel Triplatt Mixer · Voltage Math / Precision Adder
6 HP mixer and voltage math / precision adder by Intellijel: 3 inputs, 3 outputs, 9 controls.
Intellijel · Triplatt manual (PDF) ↗
Attenuverter / Offset · Unipolar/bipolar switch · Mixer · Voltage Math / Precision Adder
Inputs 3
| Jack | What it does | Range | Connections |
|---|---|---|---|
| IN A 1253 | Channel A input cv, audio | — | normalled from +5V → Channel A attenuated by Attenuator A |
| IN B 1253 | Channel B input cv, audio | — | normalled from +5V → Channel B attenuated by Attenuator B |
| IN C 1253 | Channel C input cv, audio | — | normalled from +5V → Channel C attenuated by Attenuator C |
The documents don't state: voltage, polarity, scaling, coupling, audio rate, impedance (all inputs).
Outputs 3
| Jack | What it does | Range | Connections |
|---|---|---|---|
| OUT A 1253 | Channel A output cv, audio | — | from Channel A |
| OUT B 1253 | Channel B output cv, audio | — | from Channel B, Channel A |
| OUT C/MIX 1253 | Channel C / mix cv, audio | — | from Channel C, Channel B, Channel A, mix bus |
The documents don't state: voltage, polarity, scaling, coupling, audio rate, impedance (all outputs).
Controls 9
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Attenuator A 1253 | channel attenuator knob | Channel A, OUT A | In 2 modes
|
| UNI -/+ A 1253 | channel polarity switch | Attenuator A, Channel A |
|
| Attenuator B 1253 | channel attenuator knob | Channel B, OUT B | In 2 modes
|
| UNI -/+ B 1253 | channel polarity switch | Attenuator B, Channel B |
|
| Attenuator C 1253 | channel attenuator knob | Channel C, OUT C/MIX | In 2 modes
|
| UNI -/+ C 1253 | channel polarity switch | Attenuator C, Channel C |
|
| A×2 1253 | 2x voltage multiplier switch | IN A, Channel A |
|
| B+5 1253 | adds +5V switch | IN B, Channel B |
|
| C=0 1253 | channel C mute switch | IN C, Channel C, OUT C/MIX |
|
Blocks 5
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Channel A | attenuverter | Attenuverter / offset | IN A | Attenuator A, UNI -/+ A, A×2 | OUT A | 1253 |
| Channel B | attenuverter | Attenuverter / offset | IN B | Attenuator B, UNI -/+ B, B+5 | OUT B | 1253 |
| Channel C | attenuverter | Attenuverter / offset | IN C | Attenuator C, UNI -/+ C, C=0 | OUT C/MIX | 1253 |
| +5V source | DC voltage source | — | — | — | — | 1253 |
| mix bus | summing mixer | Mixer | — | — | OUT B, OUT C/MIX | 1253 |
Specs 12
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 6 HP | — | 1253 |
| module | depth | 21 mm | — | 1253 |
| module | +12V current | 49 mA | — | 1253 |
| module | -12V current | 25 mA | — | 1253 |
| +5V source | normal voltage | 5 V | — | 1253 |
| channel output | unpatched range | 0 to 5 V | UNI position | 1253 |
| channel output | unpatched range | -5 to 5 V | -/+ position | 1253 |
| Channel A | unpatched range | -10 to 10 V | A×2 on, -/+ | 1253 |
| Channel B | unpatched input | 10 V | B+5 on | 1253 |
| A×2 | multiplier | 2 x | — | 1253 |
| B+5 | offset | 5 V | — | 1253 |
| Attenuator | UNI noon gain | 50 % | UNI position | 1253 |
Properties 7
| Subject | Property | Value | Source |
|---|---|---|---|
| Attenuator | attenuation law | linear | 1253 |
| channels | circuit | active/buffered | 1253 |
| +5V source | precision | precision 5V | 1254 |
| output LEDs | color | green +, red - | 1253 |
| output LEDs | brightness | absolute output voltage | 1253 |
| outputs | normalling | cascade into next channel | 1253 |
| module | skiff friendly | yes | 1254 |
Behavior 17
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| IN A/B/C | unpatched | receives +5V DC | — | 1253 |
| Attenuator | UNI, fully clockwise | full input passed | — | 1253 |
| Attenuator | UNI, fully counterclockwise | no output | — | 1253 |
| Attenuator | UNI, at 12:00 | half input passed | — | 1253 |
| Attenuator | -/+, fully counterclockwise | inverted input output | — | 1253 |
| Attenuator | -/+, at 12:00 | no output | — | 1253 |
| Attenuator | -/+, fully clockwise | full input passed | — | 1253 |
| A×2 | switch up | IN A voltage doubled | — | 1253 |
| B+5 | switch up | 5V added to IN B | — | 1253 |
| C=0 | switch up | IN C muted, removed from MIX | — | 1253 |
| OUT A | unpatched | summed into OUT B | — | 1253 |
| OUT A | patched | removed from B and MIX | — | 1253 |
| OUT B | unpatched | summed into OUT C/MIX | — | 1253 |
| OUT B | OUT A unpatched | carries A + B sum | — | 1253 |
| OUT C/MIX | OUT A, B unpatched | carries A + B + C | — | 1253 |
| OUT C/MIX | OUT B patched | A and B removed | — | 1253 |
| output LED | output at 0V | unlit | — | 1253 |
Functions 4
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Attenuverter / Offset | control | patchable | UNI -/+ switch: bipolar attenuverter | 1253 |
| Unipolar/bipolar switch | control | patchable | UNI -/+ switch: channel polarity | 1253 |
| Mixer | block | patchable | mix bus: OUT C/MIX sum | 1253 |
| Voltage Math / Precision Adder | control | patchable | B+5 adds 5V; A×2 doubles | 1253 |
Power
| +12 V | 49 mA |
|---|---|
| −12 V | 25 mA |
| +5 V | — |
| Width | 6 HP |
| Depth | 21 mm |
Other Mixer modules
Sources 2
- [1253]
- [1254]