intellijel/tete
Intellijel Tete Step Sequencer · Master Clock
8 HP step sequencer and master clock by Intellijel: 6 inputs, 3 outputs, 13 controls, 3 modes.
Intellijel · Tete + Tetrapad Manual v1.1 (PDF) ↗
Step Sequencer · CV Recorder / Gesture Looper · Master Clock · Tempo / Clock Sync · Clock Divider / Multiplier · LFO · Euclidean rhythm · Unipolar/bipolar switch
Inputs 6
| Jack | What it does | Range | Connections |
|---|---|---|---|
| CLK IN 1159 | external clock clock | — | → Clock, Sequencer |
| TRIG IN 1159 | assignable trigger input trigger, gate | — | → CV Setup Menu selected by CV FILE = CV Setup Menu In 3 modes
|
| RESET IN 1159 | assignable reset input trigger, gate | — | → Looper, Sequencer selected by CV FILE = CV Setup Menu |
| X IN 1159 | assignable CV input cv | -10 to 10 V | → CV Setup Menu attenuated by X Attenuverter selected by CV FILE = CV Setup Menu In 3 modes
|
| Y IN 1159 | assignable CV input cv | -10 to 10 V | → CV Setup Menu attenuated by Y Attenuverter selected by CV FILE = CV Setup Menu In 3 modes
|
| Z IN 1159 | assignable CV input cv | -10 to 10 V | → Slew attenuated by Z Attenuverter selected by CV FILE = CV Setup Menu |
The documents don't state: voltage (CLK IN, TRIG IN, RESET IN); polarity, coupling (X IN, Y IN, Z IN); scaling, threshold, audio rate, impedance (all inputs).
Outputs 3
| Jack | What it does | Range | Connections |
|---|---|---|---|
| SYNC OUT 1159 | assignable sync output clock, gate, trigger | ≤ 5 V | from Clock selected by CV FILE = CV Setup Menu |
| A OUT 1159 | assignable output cv, clock, gate, trigger | 0 to 5 V | from Looper, Sequencer selected by CV FILE = CV Setup Menu |
| B OUT 1159 | assignable output trigger, cv, clock, gate | ≤ 5 V | from Looper, Sequencer selected by CV FILE = CV Setup Menu |
The documents don't state: polarity, scaling, pulse, coupling, audio rate, impedance (all outputs).
Controls 13
| Control | What it does | Affects | Positions |
|---|---|---|---|
| X Attenuverter 1159 | X IN attenuverter knob · bipolar | X IN | — |
| Y Attenuverter 1159 | Y IN attenuverter knob · bipolar | Y IN | — |
| Z Attenuverter 1159 | Z IN attenuverter knob · bipolar | Z IN | — |
| SCREEN Encoder 1159 | menu push encoder knob | Looper, Sequencer | — |
| SETUP MODE 1159 | setup / mode select button | — |
|
| CV FILE 1159 | CV setup / file button | — |
|
| TEMPO 1159 | tempo / tap tempo button | Clock |
|
| LOOPY 1159 | Loopy on/off button | Looper, Sequencer |
|
| PLAY/PAUSE 1159 | play / pause button | Looper, Sequencer |
|
| RECORD 1159 | record / erase button | Looper, Sequencer |
|
| Seq Clock 1159 | sequencer clock div/mult menu setting | Sequencer | — |
| Seq. Swing 1159 | sequencer swing menu setting · 50 to 78 % | Sequencer | — |
| Euclidean Swing 1159 | euclidean pad swing menu setting · 50 to 78 % | Combo Mode | — |
Blocks 7
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Looper | real-time gesture recorder | — | CLK IN, TRIG IN, RESET IN | RECORD, PLAY/PAUSE, LOOPY | SYNC OUT, A OUT, B OUT | 1159 |
| Sequencer | step recorder | Step sequencer | CLK IN, RESET IN | RECORD, PLAY/PAUSE, LOOPY | SYNC OUT, A OUT, B OUT | 1159 |
| Clock | internal/external tempo | Clock generator, Clock divider / multiplier | CLK IN | TEMPO | SYNC OUT | 1159 |
| Combo Mode | per-pad functions | LFO, Euclidean / algorithmic pattern generator | X IN, Y IN, Z IN | — | — | 1159 |
| Notes Mode | isomorphic keyboard | — | X IN, Y IN, Z IN | — | — | 1159 |
| Voltages Mode | voltage storage banks | — | X IN, Y IN, Z IN, TRIG IN | — | — | 1159 |
| Tetrapad link | i2C expander connection | Expander | — | — | — | 1159 |
Modes 3
Specs 23
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Sequencer | max steps | 256 steps | — | 1159 |
| Looper | optimized recording length | 5 min | — | 1159 |
| CV inputs | readable range | -10 to 10 V | — | 1159 |
| CV inputs | full-sweep range | -5 to 5 V | — | 1159 |
| A OUT | Loop Position range | 0 to 5 V | — | 1159 |
| Tap tempo | range | 20 to 480 BPM | — | 1159 |
| CLK IN | maximum external clock | 2400 BPM | — | 1159 |
| Seq Clock | division | 2 to 4 x | divide /2 to /4 | 1159 |
| Seq Clock | multiplication | 1 to 4 x | — | 1159 |
| Swing | range | 50 to 78 % | — | 1159 |
| Combo LFO | rate | 0.0166667 to 100 Hz | — | 1159 |
| Combo LFO | clocked rate | 0.03125 to 32 x clock | LFO Sync on | 1159 |
| Notes Mode | keys | 4 to 16 keys | — | 1159 |
| Voltages Mode | banks | 8 to 16 banks | — | 1159 |
| Voltages Mode | voltages per bank | 8 voltages | — | 1159 |
| presets | per mode | 99 presets | — | 1159 |
| Inversion / Rotate CV | step size | 1.25 V | — | 1159 |
| Semitone CV | step size | 0.083 V | — | 1159 |
| microSD card | capacity | 16 GB | — | 1159 |
| module | width | 8 hp | — | 1159 |
| module | maximum depth | 39 mm | — | 1159 |
| module | current draw +12V | 120 mA | — | 1159 |
| module | current draw -12V | 6 mA | — | 1159 |
Properties 13
| Subject | Property | Value | Source |
|---|---|---|---|
| Tête | requires | Tetrapad firmware 3.0.0.1+ | 1159 |
| Tête/Tetrapad link | connection | 6-wire i2C cable | 1159 |
| CLK IN | assignment | always clock | 1159 |
| attenuverters | 1V/oct assignments | ignored | 1159 |
| CV assignments | scope | per mode | 1159 |
| state | save | automatic on change | 1159 |
| SYNC OUT | default | Clock | 1159 |
| A OUT | default | Loop Position | 1159 |
| B OUT | default | EOL/EOS | 1159 |
| RESET IN | default | Reset | 1159 |
| Z IN | default | Slew | 1159 |
| Combo Mode | sequencer | unavailable, looper only | 1159 |
| outputs | gate/trigger level | +5V | 1159 |
Behavior 12
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| state save | looper or sequencer playing | waits until playback stops | — | 1159 |
| Seq. Swing | Seq Clock multiplied above 1 | no effect | — | 1159 |
| CLK IN | pulses above 2400 BPM | ignored | — | 1159 |
| Euclidean pad | Tête unclocked | pattern does not play | — | 1159 |
| Euclidean pad | length set zero | simple drum trigger | — | 1159 |
| Voltages Mode trigger mods | looper/sequencer playback | overridden by playback | — | 1159 |
| continuous CV mods | looper/sequencer playback | offset on playback data | — | 1159 |
| Z IN slew | beyond limits | clamped to available slew | — | 1159 |
| Run assignment | gate low | playback pauses | — | 1159 |
| Semitone CV | above C5 | CV ignored | — | 1159 |
| Tetrapad | Tête connected | standalone modes don't apply | — | 1159 |
| Tête | unreadable microSD | formats card FAT32 | — | 1159 |
Functions 8
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Step Sequencer | block | patchable | 256-step Sequencer | 1159 |
| CV Recorder / Gesture Looper | block | patchable | Looper records Tetrapad gestures | 1159 |
| Master Clock | block | patchable | internal tempo, SYNC OUT Clock | 1159 |
| Tempo / Clock Sync | jack | patchable | CLK IN drives tempo | 1159 |
| Clock Divider / Multiplier | control | internal | Seq Clock divide/multiply | 1159 |
| LFO | mode | patchable | Combo Mode LFO pad | 1159 |
| Euclidean rhythm | mode | patchable | Combo Mode Euclidean pad | 1159 |
| Unipolar/bipolar switch | mode | patchable | Combo LFO set bipolar or unipolar | 1159 |
Power
| +12 V | 120 mA |
|---|---|
| −12 V | 6 mA |
| +5 V | — |
| Width | 8 HP |
| Depth | 39 mm |
Other Step Sequencer modules
Firmware 4
| Version | Released | Notes |
|---|---|---|
| 1.2.5.0 | — | 1159 |
| 1.1.0.1 | 2020-03-05 | Fixed: scale quantizer in Combo Mode was locking to chromatic scale on pads 3 and 41159 |
| 1.1 | 2020-03-02 | Added Run+Rec and Loopy options to SYNC/A/B outputs; added Late Comp toggle in Global Setup; added Reset Mode option in Mode SETUP menu; Tête now ignores external clocks above 2400 BPM; added Voltage Bank pad type in Combo Mode; added per-pad Touch and Pressure output options; added independent switch latch for Combo Mode switches; added Random Min/Max range for Voltages Mode randomization; various bug fixes1159 |
| 1.0.0.4 | 2019-12-04 | Initial release1159 |
Sources 2
- [1159]
-
[1160]
Intellijel Tete product page ↗product page⚠ verified 2026-06-08 · the manufacturer changed this document since