intellijel/scales

Intellijel Scales Step Sequencer · Quantizer

8 HP step sequencer and quantizer by Intellijel: 3 inputs, 3 outputs, 14 controls, 18 modes.

Intellijel · Scales Dual Channel Note Quantizer and Step Sequencer Manual v1.01 (PDF) ↗

Quantizer · Step Sequencer · Manual Controller

Inputs 3

Inputs
JackWhat it doesRangeConnections
PITCH IN 218signal to quantize
pitch, cv
-10 to 10 V, bipolar
scaling v oct
→ Scale quantizer, OUT A, OUT B
In 1 mode
  • LEARN: learns scale notes → active scale
TRIG IN 218quantize sample trigger
trigger, gate, clock
—
→ Scale quantizer
In 2 modes
  • SEQ: sequencer clock → Step sequencer
  • LEARN: note learn gate → active scale
SHIFT IN 218shift quantized outputs
pitch, cv, trigger
-10 to 10 V, bipolar
scaling v oct
→ Scale quantizer
In 4 modes
  • DUAL: pitch input for OUT B → OUT B
  • SEQ: sequencer reset → Step sequencer
  • SHIFT MODE: ROOT: selects scale root → active scale
  • SHIFT MODE: SCALE: selects scale in bank → active scale

The documents don't state: voltage, polarity (TRIG IN); threshold, coupling, audio rate, impedance (all inputs).

Outputs 3

Outputs
JackWhat it doesRangeConnections
OUT A 218quantized pitch output
pitch
-10 to 10 V, bipolar
scaling v oct
from Scale quantizer
In 1 mode
  • TUNING: 0V tuning reference
OUT B 218quantized pitch output
pitch
-10 to 10 V, bipolar
scaling v oct
from Scale quantizer
In 3 modes
  • DUAL: quantized SHIFT input
  • SEQ: step sequencer output
  • TUNING: 0V tuning reference
TRIG OUT 218trigger or gate out
trigger, gate
—
from Scale quantizer, TRIG IN
selected by A > TRIG = on, B > TRIG = on
In 2 modes
  • SEQ: sequencer step gate
  • TUNING: high gate

The documents don't state: voltage, polarity, pulse (TRIG OUT); coupling, audio rate, impedance (all outputs).

Controls 14

Controls
ControlWhat it doesAffectsPositions
MULTIFUNCTION buttons 218note buttons, 12
button
active scale, OUT A, OUT B
In 7 modes
  • Scale Display: toggle scale notes
  • ROOT: set scale root
  • INTRVL: set OUT B interval
  • SAVE: select bank/slot
  • LOAD: select bank/slot
  • CONFIG: set config options
  • SEQ: enter sequence notes
LEARN 218enter Learn Mode
button
active scale
In 1 mode
  • SEQ: octave down
CONFIG 218enter CONFIG Mode
button
Scale quantizer
In 1 mode
  • SEQ: octave up
ROOT 218enter ROOT Mode
button
active scale
In 1 mode
  • SEQ: add rest
INTRVL 218enter INTRVL Mode
button
OUT B
In 1 mode
  • SEQ: tie
SAVE 218save scale
button
active scale
In 1 mode
  • SEQ: PLAY → Step sequencer
LOAD 218load scale
button
active scale
In 1 mode
  • SEQ: REC → Step sequencer
SHIFT MODE 218SHIFT input interpretation
menu setting
SHIFT IN, Scale quantizer
  • PRE: added before scale quantize
  • DIATONIC: shift in scale degrees
  • POST: added after quantize
  • ROOT: selects scale root
  • SCALE: selects scale in bank
SHIFT MODE: OUT A 218shift OUT A
menu setting
OUT A
  • on: OUT A shifted
  • off: OUT A unshifted
SHIFT MODE: OUT B 218shift OUT B
menu setting
OUT B
  • on: OUT B shifted
  • off: OUT B unshifted
A > TRIG 218trig on A change
menu setting
TRIG OUT
  • on: trig on OUT A change
  • off: no OUT A trigs
B > TRIG 218trig on B change
menu setting
TRIG OUT
  • on: trig on OUT B change
  • off: no OUT B trigs
OUT B mode 218OUT B configuration
menu setting
OUT B, SHIFT IN
  • CHROM: chromatic interval offset
  • DIATONIC: diatonic interval offset
  • DUAL: second quantizer channel
  • SEQ: step sequencer output
trigger delay 218incoming trigger delay
menu setting
TRIG IN—

Blocks 2

Blocks and their connections
BlockKindTypesInputsControlsOutputsSource
Scale quantizerdual-channel note quantizerQuantizerPITCH IN, TRIG IN, SHIFT INMULTIFUNCTION buttons, SHIFT MODE, OUT B modeOUT A, OUT B, TRIG OUT218
Step sequencer101-style step sequencerStep sequencerTRIG IN, SHIFT INMULTIFUNCTION buttons, SAVE, LOAD, LEARN, CONFIG, ROOT, INTRVLOUT B, TRIG OUT218

Modes 18

Modes
ModeKindSelected bySelection methodSource
Scale Displaydefault display—no bottom buttons lit218
LEARNscale learningLEARN = pressLEARN button218
CONFIGconfigurationCONFIG = pressCONFIG button218
ROOTroot settingROOT = pressROOT button218
INTRVLinterval settingINTRVL = pressINTRVL button218
TUNINGtuning reference—long-press INTRVL218
SAVEmemory saveSAVE = pressSAVE button218
LOADmemory loadLOAD = pressLOAD button218
SHIFT MODE: PREshift modeSHIFT MODE = PRECONFIG + B button218
SHIFT MODE: DIATONICshift modeSHIFT MODE = DIATONICCONFIG + A# button218
SHIFT MODE: POSTshift modeSHIFT MODE = POSTCONFIG + A button218
SHIFT MODE: ROOTshift modeSHIFT MODE = ROOTCONFIG + F# button218
SHIFT MODE: SCALEshift modeSHIFT MODE = SCALECONFIG + F button218
OUT B: CHROMOUT B modeOUT B mode = CHROMCONFIG + D button218
OUT B: DIATONICOUT B modeOUT B mode = DIATONICCONFIG + C# button218
DUALdual quantizerOUT B mode = DUALDUAL | SEQ pressed once218
SEQstep sequencerOUT B mode = SEQDUAL | SEQ pressed twice218
Calibrationcalibration—long-press CONFIG in CONFIG218

Hidden functions 8

Hidden functions
FunctionTriggerAffectsSource
clear scale and learnlong-press LEARN >1 sactive scale218
set root without transposinglong-press note in ROOTactive scale218
trigger delay settinglong-press A > TRIGTRIG IN218
Tuning Modelong-press INTRVL >1 sOUT A, OUT B, TRIG OUT218
save/load sequenceslong-press SAVE/LOAD >1 sStep sequencer218
factory reset scaleshold SAVE at power-upactive scale218
erase all sequenceshold INTRVL at power-upStep sequencer218
Calibration Modelong-press CONFIG in CONFIGOUT A, OUT B, PITCH IN, SHIFT IN218

Specs 15

Specs
SubjectQuantityValueConditionSource
OUT A / OUT Boutput range20 octaves—218
memoryscale slots35 scales—218
memorysequence slots35 sequences—218
memorybanks5 banks—218
memoryslots per bank7 slots—218
Step sequencermaximum length≤ 128 steps—218
SHIFT INscale select range0 to 5 VSHIFT MODE: SCALE218
SHIFT INvoltage per scale0.7 VSHIFT MODE: SCALE218
buttonslong-press time≥ 1 s—218
Calibrationoutput calibration points-4 to 4 V—218
modulewidth8 HP—218
moduledepth39 mm—218
modulecurrent +12V35 mA—218
modulecurrent -12V5 mA—219
factory scalescount35 scales—219

Properties 12

Properties
SubjectPropertyValueSource
Scale quantizeroutput pitch scaling1V/Oct218
active scaleedited scale storagevolatile218
Scale Displayin-scale note LEDgreen218
Scale DisplayOUT A note LEDred218
Scale DisplayOUT B note LEDyellow218
SHIFT MODE: POSToutput constrained to scaleno218
SHIFT MODE: PREoutput constrained to scaleyes218
SHIFT MODE: DIATONICoutput constrained to scaleyes218
Step sequencerstep typesnote, rest, tie218
memorystorageEEPROM218
inputsfilteringeliminates jitter219
modulefirmware updatesUSB219

Behavior 33

Behavior rules
SubjectWhenEffectModeSource
Scale quantizerTRIG IN unpatchedquantizes continuously—218
Scale quantizerTRIG IN patchedsamples PITCH on trigger—218
TRIG OUTA and B > TRIG offTRIG IN passed through—218
TRIG OUTA > TRIG ontrig on OUT A change—218
TRIG OUTB > TRIG ontrig on OUT B change—218
SHIFT INDUAL modepitch input for OUT BDUAL218
shift settingsDUAL modehave no effectDUAL218
PRE/DIATONIC/POSTOUT B set DUALunavailableDUAL218
SHIFT INSEQ mode triggerresets sequencer to step 1SEQ218
TRIG INSEQ modeclock advances sequenceSEQ218
A > TRIG / B > TRIGSEQ modemutually exclusiveSEQ218
Step sequencerA > TRIG on in SEQadvances on OUT A changeSEQ218
TRIG OUTB > TRIG on in SEQpasses only while playingSEQ218
TRIG OUTneither TRIG option, SEQTRIG IN always thruSEQ218
scale editingSHIFT MODE: SCALE activefront panel editing disabled—218
SHIFT INSHIFT MODE: SCALE, 0Vselects first scale in bank—218
INTRVL offsetshift also on OUT Bsummed with shift—218
LEARNshort pressadds to active scale—218
LEARNlong pressclears active scale first—218
ROOT note buttonpressedtransposes scale pattern—218
ROOT note buttonheldsets root without transposing—218
root changesequence playingtransposes sequence playbackSEQ218
Scale DisplayA and B same noteonly red LED—218
OUT A / OUT BTUNING modeoutput 0VTUNING218
TRIG OUTTUNING modehigh gateTUNING218
TRIG OUTnote held while recordinggate held highSEQ218
sequence entrynote outside scalestill allowedSEQ218
REC pressduring playbackfreezes playhead, replaces notesSEQ218
REC presssequence stoppedclears sequenceSEQ218
PLAY stop then RECnew notes enteredoverwrites whole sequenceSEQ218
factory resetSAVE held at power-upsequences not erased—218
PITCH/SHIFT calibrationbefore OUT A calibratednot possible—218
tied notesA > TRIG or no-triggate held highSEQ218

Functions 3

Function tags
FunctionBasisScopeEvidenceSource
Quantizerblockpatchableblock Scale quantizer: note quantizer218
Step Sequencermodepatchablemode SEQ: 128-step sequencer to OUT B218
Manual Controllerdocumented usepatchabledocumented: use as miniature keyboard218

Power

+12 V35 mA
−12 V5 mA
+5 V—
Width8 HP
Depth39 mm

Other Step Sequencer modules

All Step Sequencer modules →

Firmware 2

VersionReleasedNotes
1.012019-07Enhancement: When recording a sequence, gate is held high for as long as a note button is held, enabling real-time keyboard performance via OUT B. Fix: When A->Trig or NO Trig is selected, tied notes now hold the gate high when advancing the sequence.218
1.02019-01Initial release.218

Sources 2

  1. [218]
  2. [219]
    Intellijel Scales product page ↗product page
    ● verified 2026-05-06