instruo/aradh
Instruō àradh VCA · Envelope Follower
6 HP VCA and envelope follower by Instruō: 4 inputs, 2 outputs, 9 controls, 4 modes.
Instruō · àradh User Manual (PDF) ↗
Lowpass Filter · Self-Oscillating Filter · VCA · Envelope Follower · Logic Gates · Compressor / Dynamics
Inputs 4
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Input 470 | filter and VCA input audio | coupling ac | → Low pass filter, VCA, Envelope follower |
| 1V/Oct Input 470 | cutoff keyboard tracking pitch, cv | bipolar scaling v oct | → Filter Cutoff |
| Strike Input 470 | impulse envelope trigger gate, trigger | audio rate yes | → Impulse envelope |
| CV Input 470 | user-defined CV input cv | bipolar | normalled from Gate/Follow Output signal → VCA amplitude, Filter Cutoff, Resonance, Impulse envelope decay attenuated by CV Attenuverter selected by CV Assign Button = white, CV Assign Button = amber, CV Assign Button = white/amber |
The documents don't state: voltage, impedance (all inputs); threshold (Strike Input); coupling (1V/Oct Input, CV Input).
Outputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Output 470 | filter and VCA output audio | coupling ac | from Low pass filter, VCA |
| Gate/Follow Output 470 | follower or comparator gate cv, gate | 0 to 8 V | from Envelope follower, Comparator selected by Gate/Follow Toggle = down, Gate/Follow Toggle = up In 2 modes
|
The documents don't state: voltage (Output); impedance (all outputs).
Controls 9
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Filter Cutoff Knob 470 | filter cutoff frequency knob | Low pass filter | — |
| Resonance Knob 470 | filter resonance knob | Low pass filter | In 1 mode
|
| Bias Knob 470 | VCA level knob | VCA | In 1 mode
|
| Pre/Post Switch 470 | VCA/filter routing order switch | VCA, Low pass filter, Envelope follower |
|
| Strike Button 470 | manual impulse trigger button | Impulse envelope | — |
| Decay Knob 470 | impulse envelope decay knob | Impulse envelope | In 1 mode
|
| CV Attenuverter 470 | CV Input depth knob · bipolar | CV Input | — |
| CV Assign Button 470 | primary CV target button | CV Input |
|
| Gate/Follow Toggle 470 | Gate/Follow Output source switch | Gate/Follow Output |
|
Blocks 5
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Low pass filter | transistor ladder filter | Filter | Input, 1V/Oct Input, CV Input | Filter Cutoff Knob, Resonance Knob | Output | 470 |
| VCA | VCA | VCA | Input, CV Input | Bias Knob, Pre/Post Switch | Output | 470 |
| Impulse envelope | impulse envelope | Envelope generator | Strike Input | Decay Knob, Strike Button | — | 470 |
| Envelope follower | envelope follower | Envelope follower | Input | Resonance Knob, Decay Knob, Pre/Post Switch | Gate/Follow Output | 470 |
| Comparator | comparator gate | Logic | — | Bias Knob | Gate/Follow Output | 470 |
Modes 4
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| Post-filter VCA | routing | Pre/Post Switch = up | — | 470 |
| Pre-filter VCA | routing | Pre/Post Switch = down | — | 470 |
| Envelope follower output | output source | Gate/Follow Toggle = down | — | 470 |
| Comparator gate output | output source | Gate/Follow Toggle = up | — | 470 |
Specs 6
Properties 10
| Subject | Property | Value | Source |
|---|---|---|---|
| Low pass filter | self-oscillation | yes, sine | 470 |
| Low pass filter | resonance gain compensation | auto-gain | 470 |
| CV Input | combination | summed with knobs | 470 |
| Impulse envelope | modulation depth | fixed | 470 |
| Impulse envelope | targets | cutoff and VCA | 470 |
| Strike Input | audio-rate triggering | yes | 470 |
| CV Assign setting | power cycle | retained | 470 |
| Secondary CV targets | options | resonance, decay, both | 470 |
| Primary and secondary targets | combination | simultaneous | 470 |
| Module | reverse polarity protection | yes | 470 |
Behavior 14
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Resonance Knob | fully clockwise | self-oscillates sine | — | 470 |
| VCA | no CV, Bias centred | unity gain | — | 470 |
| CV Input | above 3.6V on VCA | adds gain | — | 470 |
| CV Input | unpatched | follower/gate signal normalled | — | 470 |
| CV Input | filter self-oscillating | acts as FM | — | 470 |
| CV Attenuverter | centred | CV fully attenuated | — | 470 |
| CV Attenuverter | anticlockwise | inverted modulation | — | 470 |
| Strike Input | rising edge | fires impulse envelope | — | 470 |
| Strike Button | signal at Strike Input | lights white | — | 470 |
| Envelope follower | Pre/Post down during setup | follows pre-filter signal | — | 470 |
| Envelope follower | Pre/Post up during setup | follows post-filter signal | — | 470 |
| Envelope follower | active | Strike Button lights amber | — | 470 |
| Factory reset | performed | clears CV targets, follower post-filter | — | 470 |
| Filter Cutoff Knob | filter self-oscillating | sets sine frequency | — | 470 |
Functions 6
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Lowpass Filter | block | patchable | block: transistor ladder low pass filter | 470 |
| Self-Oscillating Filter | property | patchable | resonance fully clockwise: sine oscillation | 470 |
| VCA | block | patchable | block: VCA pre/post filter | 470 |
| Envelope Follower | block | patchable | jack Gate/Follow Output: envelope follower | 470 |
| Logic Gates | block | patchable | jack Gate/Follow Output: comparator gate | 470 |
| Compressor / Dynamics | documented use | patchable | documented: compressor, expander, noise gate | 470 |
Power
| +12 V | 60 mA |
|---|---|
| −12 V | 40 mA |
| +5 V | — |
| Width | 6 HP |
| Depth | 27 mm |
Other VCA modules
Sources 2
-
[470]
Instruō àradh User Manual ↗manual · primary⚠ verified 2026-05-17 · the manufacturer changed this document since
- [471]