grp/envelope-follower
GRP Synthesizer P12 Envelope Follower External Audio I/O · Envelope Follower
6 HP external audio i/o and envelope follower by GRP Synthesizer: 1 input, 3 outputs, 4 controls.
GRP Synthesizer · P12 Envelope Follower Datasheet (PDF) ↗
Envelope Follower · External Audio I/O · Attenuverter / Offset
Inputs 1
| Jack | What it does | Range | Connections |
|---|---|---|---|
| INPUT 1032 | audio signal input audio | — | → input preamp, envelope follower attenuated by INPUT |
The documents don't state: voltage, polarity, coupling, impedance (INPUT).
Outputs 3
| Jack | What it does | Range | Connections |
|---|---|---|---|
| PRE OUT 1032 | audio after INPUT level audio | — | from input preamp |
| GATE OUT 1032 | gate tension output gate | — | from envelope follower |
| ENV OUT 1032 | envelope follower output cv | — | from envelope follower attenuated by ENV OUT |
The documents don't state: voltage, polarity, coupling, impedance (all outputs); scaling, audio rate (ENV OUT); pulse (GATE OUT).
Controls 4
Blocks 2
Specs 4
Properties 3
Behavior 2
Functions 3
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Envelope Follower | block | patchable | block: envelope follower, ENV OUT | 1032 |
| External Audio I/O | control | patchable | control LINE/MIC: line/mic input level; PRE OUT | 1032 |
| Attenuverter / Offset | control | patchable | control ENV OUT: attenuverter | 1032 |
Power
| +12 V | 18 mA |
|---|---|
| −12 V | 20 mA |
| +5 V | 0 mA |
| Width | 6 HP |
| Depth | — |
Other External Audio I/O modules
Sources 2
- [1032]
- [1033]