doepfer/a-180-6
Doepfer A-180-6 Multiple / Buffered Mult
4 HP multiple / buffered mult by Doepfer: 3 inputs, 3 outputs, 6 controls.
Inputs 3
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Input 1 2049 | buffer input audio, cv | coupling dc impedance 1000000 Ω | → Unit 1 attenuated by Level 1 selected by Input 1 +5V jumper = installed |
| Input 2 2049 | buffer input audio, cv | coupling dc impedance 1000000 Ω | normalled from Input 1 → Unit 2 attenuated by Level 2 selected by Input 2 normal bridge = Unit 1 output |
| Input 3 2049 | buffer input audio, cv | coupling dc impedance 1000000 Ω | normalled from Input 2 → Unit 3 attenuated by Level 3 |
The documents don't state: voltage, polarity, scaling, audio rate (all inputs).
Outputs 3
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Output 1 2049 | buffered output audio, cv | coupling dc impedance 1000 Ω | from Unit 1 |
| Output 2 2049 | buffered output audio, cv | coupling dc impedance 1000 Ω | from Unit 2 |
| Output 3 2049 | buffered output audio, cv | coupling dc impedance 1000 Ω | from Unit 3 |
The documents don't state: voltage, polarity, scaling, audio rate (all outputs).
Controls 6
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Level 1 2049 | output level knob | Unit 1, Output 1 | — |
| Level 2 2049 | output level knob | Unit 2, Output 2 | — |
| Level 3 2049 | output level knob | Unit 3, Output 3 | — |
| Gain solder bridge 2049 | maximum amplification jumper | Unit 1, Unit 2, Unit 3 |
|
| Input 2 normal bridge 2049 | Input 2 normal source jumper | Input 2 |
|
| Input 1 +5V jumper 2049 | Input 1 +5V normal jumper | Input 1 |
|
Blocks 3
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Unit 1 | adjustable buffer | Multiple / buffer, Attenuverter / offset | Input 1 | Level 1 | Output 1 | 2049 |
| Unit 2 | adjustable buffer | Multiple / buffer, Attenuverter / offset | Input 2 | Level 2 | Output 2 | 2049 |
| Unit 3 | adjustable buffer | Multiple / buffer, Attenuverter / offset | Input 3 | Level 3 | Output 3 | 2049 |
Specs 8
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Unit | maximum amplification | 1 x | factory setting | 2049 |
| Unit | maximum amplification | 2 x | solder bridge installed | 2049 |
| Output | CV source range | 0 to 5 V | +5V normal, gain 1 | 2049 |
| Output | CV source range | 0 to 10 V | +5V normal, gain 2 | 2049 |
| module | width | 4 HP | — | 2049 |
| module | depth | 30 mm | — | 2049 |
| module | +12V current | 10 mA | — | 2049 |
| module | -12V current | 10 mA | — | 2049 |
Properties 3
Behavior 5
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Input 2 | unpatched | Input 1 signal used | — | 2049 |
| Input 3 | unpatched | Input 2 signal used | — | 2049 |
| Input 1 | unpatched, +5V jumper installed | +5V used: CV source | — | 2049 |
| Level 1 | Input 2 bridge altered, 2/3 unpatched | also sets Units 2, 3 | — | 2049 |
| Input 2 | normal bridge altered, unpatched | Unit 1 output used | — | 2049 |
Functions 1
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Multiple / Buffered Mult | documented use | patchable | documented: distribution of one signal | 2049 |
Power
| +12 V | 10 mA |
|---|---|
| −12 V | 10 mA |
| +5 V | — |
| Width | 4 HP |
| Depth | 30 mm |
Other Multiple / Buffered Mult modules
Sources 1
- [2049]