befaco/atte
Befaco Atte Attenuverter / Offset
4 HP attenuverter / offset by Befaco: 4 inputs, 4 outputs, 8 controls.
Inputs 4
| Jack | What it does | Range | Connections |
|---|---|---|---|
| IN A 1284 | channel 1 input audio, cv | -10 to 10 V, bipolar | normalled from +10V → Channel 1 attenuated by Attenuator 1 |
| IN B 1284 | channel 2 input audio, cv | -10 to 10 V, bipolar | normalled from IN A → Channel 2 attenuated by Attenuator 2 |
| IN C 1284 | channel 3 input audio, cv | -10 to 10 V, bipolar | normalled from IN B → Channel 3 attenuated by Attenuator 3 |
| IN D 1284 | channel 4 input audio, cv | -10 to 10 V, bipolar | normalled from IN C → Channel 4 attenuated by Attenuator 4 |
The documents don't state: coupling, impedance (all inputs).
Outputs 4
| Jack | What it does | Range | Connections |
|---|---|---|---|
| OUT 1 1284 | channel 1 output audio, cv | — | from Channel 1 |
| OUT 2 1284 | channel 2 output audio, cv | — | from Channel 2 |
| OUT 3 1284 | channel 3 output audio, cv | — | from Channel 3 |
| OUT 4 1284 | channel 4 output audio, cv | — | from Channel 4 |
The documents don't state: voltage, impedance (all outputs).
Controls 8
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Attenuator 1 1284 | manual attenuator knob · 0 to 1 gain · unipolar | Channel 1 | — |
| Mode Switch 1 1284 | attenuate or invert switch | Channel 1 |
|
| Attenuator 2 1284 | manual attenuator knob · 0 to 1 gain · unipolar | Channel 2 | — |
| Mode Switch 2 1284 | attenuate or invert switch | Channel 2 |
|
| Attenuator 3 1284 | manual attenuator knob · 0 to 1 gain · unipolar | Channel 3 | — |
| Mode Switch 3 1284 | attenuate or invert switch | Channel 3 |
|
| Attenuator 4 1284 | manual attenuator knob · 0 to 1 gain · unipolar | Channel 4 | — |
| Mode Switch 4 1284 | attenuate or invert switch | Channel 4 |
|
Blocks 4
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Channel 1 | unity gain amplifier | Attenuverter / offset | IN A | Attenuator 1, Mode Switch 1 | OUT 1 | 1284 |
| Channel 2 | unity gain amplifier | Attenuverter / offset | IN B | Attenuator 2, Mode Switch 2 | OUT 2 | 1284 |
| Channel 3 | unity gain amplifier | Attenuverter / offset | IN C | Attenuator 3, Mode Switch 3 | OUT 3 | 1284 |
| Channel 4 | unity gain amplifier | Attenuverter / offset | IN D | Attenuator 4, Mode Switch 4 | OUT 4 | 1284 |
Specs 10
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Channel | gain | 0 to 1 x | Mode Switch + | 1284 |
| Channel | gain | -1 to 0 x | Mode Switch - | 1284 |
| Channel 1 | offset voltage | 10 V | IN A unpatched | 1284 |
| inputs | input range | -10 to 10 V | — | 1284 |
| module | width | 4 HP | — | 1284 |
| module | depth | 25 mm | assembled version | 1284 |
| module | depth | 35 mm | DIY version | 1284 |
| module | +12V current | 60 mA | — | 1284 |
| module | -12V current | 50 mA | — | 1284 |
| module | +5V current | 0 mA | — | 1284 |
Properties 3
Behavior 6
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| IN A | unpatched | normalled to 10V offset | — | 1284 |
| IN B/C/D | unpatched | receives input above | — | 1284 |
| patched input | jacks below empty | mults to empty jacks | — | 1284 |
| Attenuator | fully left | amplitude zero | — | 1284 |
| Mode Switch | + position | unity gain attenuator | — | 1284 |
| Mode Switch | - position | unity gain inverter | — | 1284 |
Functions 2
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Attenuverter / Offset | control | patchable | Attenuator + Mode Switch: 0 to -1 | 1284 |
| Multiple / Buffered Mult | documented use | patchable | documented: splitter via cascaded inputs | 1284 |
Power
| +12 V | 60 mA |
|---|---|
| −12 V | 50 mA |
| +5 V | 0 mA |
| Width | 4 HP |
| Depth | 25 mm |
Other Attenuverter / Offset modules
Sources 2
- [1284]
- [1285]