doepfer/a-136
Doepfer A-136 Distortion / Saturation
8 HP distortion / saturation by Doepfer: 3 inputs, 1 output, 6 controls.
Inputs 3
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Input 1828 | signal input audio, cv | — | → Waveshaper |
| Ext. Level (+L) 1828 | positive clipping level CV cv | — | → Waveshaper, +L |
| Ext. Level (-L) 1828 | negative clipping level CV cv | — | → Waveshaper, -L |
The documents don't state: voltage, impedance (all inputs); normalling (Input).
Outputs 1
The documents don't state: voltage, impedance (Output).
Controls 6
| Control | What it does | Affects | Positions |
|---|---|---|---|
| A 1828 | original signal amplification knob · -4 to 4 x · bipolar | Waveshaper | — |
| +L 1828 | positive clipping level knob · 0 to 10 scale | Waveshaper | — |
| -L 1828 | negative clipping level knob · 0 to 10 scale | Waveshaper | — |
| +A 1828 | positive component amplification knob · -4 to 4 x · bipolar | Waveshaper | — |
| -A 1828 | negative component amplification knob · -4 to 4 x · bipolar | Waveshaper | — |
| JP2 1829 | input coupling select jumper | Input |
|
Blocks 1
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Waveshaper | distortion / waveshaper | Waveshaper / wavefolder, Distortion / saturation | Input, Ext. Level (+L), Ext. Level (-L) | A, +L, -L, +A, -A | Output | 1828 |
Specs 12
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 8 HP | — | 1829 |
| module | width | 40.3 mm | — | 1829 |
| module | depth | 45 mm | — | 1829 |
| module | +12V current | 30 mA | — | 1829 |
| module | -12V current | 10 mA | — | 1829 |
| A | amplification factor | -4 to 4 x | — | 1828 |
| A | amplification at setting 0 | -4 x | — | 1828 |
| A | amplification at setting 3.5 | -1 x | — | 1828 |
| A | amplification at setting 5 | 0 x | — | 1828 |
| A | amplification at setting 6.5 | 1 x | — | 1828 |
| A | amplification at setting 10 | 4 x | — | 1828 |
| Input | pre-amp clipping level | 7 Vpp | — | 1829 |
Properties 5
Behavior 9
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| +L knob | Ext. Level (+L) patched | no function; CV sets level | — | 1828 |
| -L knob | Ext. Level (-L) patched | no function; CV sets level | — | 1828 |
| +A section | input above +L | amplification +A applies | — | 1828 |
| -A section | input below -L | amplification -A applies | — | 1828 |
| +A section | input never exceeds +L | no effect | — | 1828 |
| Ext. Level | unsuitable CV applied | may not work properly | — | 1828 |
| Input | signals above ~7 Vpp | clips at pre-amp | — | 1829 |
| JP2 | removed | AC-coupled input | — | 1829 |
| JP2 | LFO processing | must be installed | — | 1829 |
Functions 1
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Distortion / Saturation | block | patchable | block Waveshaper: distortion/waveshaping | 1828 |
Power
| +12 V | 30 mA |
|---|---|
| −12 V | 10 mA |
| +5 V | — |
| Width | 8 HP |
| Depth | 45 mm |
Other Distortion / Saturation modules
Sources 2
- [1828]
- [1829]