boredbrain/optx-v2
Boredbrain Music Optx v2 External Audio I/O
10 HP external audio i/o by Boredbrain Music: 9 inputs, 9 outputs, 7 controls, 6 modes.
Inputs 9
| Jack | What it does | Range | Connections |
|---|---|---|---|
| IN 1 1826 | analog input to ADAT audio, cv | -10 to 10 V, bipolar impedance 50000 Ω | → ADC, Tx selected by AUDIO/CV 1-2 = AUDIO, AUDIO/CV 1-2 = CV In 2 modes
|
| IN 2 1826 | analog input to ADAT audio, cv | -10 to 10 V, bipolar impedance 50000 Ω | → ADC, Tx selected by AUDIO/CV 1-2 = AUDIO, AUDIO/CV 1-2 = CV In 2 modes
|
| IN 3 1826 | analog input to ADAT audio, cv | -10 to 10 V, bipolar impedance 50000 Ω | → ADC, Tx selected by AUDIO/CV 3-4 = AUDIO, AUDIO/CV 3-4 = CV In 2 modes
|
| IN 4 1826 | analog input to ADAT audio, cv | -10 to 10 V, bipolar impedance 50000 Ω | → ADC, Tx selected by AUDIO/CV 3-4 = AUDIO, AUDIO/CV 3-4 = CV In 2 modes
|
| IN 5 1826 | analog input to ADAT audio, cv | -10 to 10 V, bipolar impedance 50000 Ω | → ADC, Tx selected by AUDIO/CV 5-6 = AUDIO, AUDIO/CV 5-6 = CV In 2 modes
|
| IN 6 1826 | analog input to ADAT audio, cv | -10 to 10 V, bipolar impedance 50000 Ω | → ADC, Tx selected by AUDIO/CV 5-6 = AUDIO, AUDIO/CV 5-6 = CV In 2 modes
|
| IN 7 1826 | analog input to ADAT audio, cv | -10 to 10 V, bipolar impedance 50000 Ω | → ADC, Tx selected by AUDIO/CV 7-8 = AUDIO, AUDIO/CV 7-8 = CV In 2 modes
|
| IN 8 1826 | analog input to ADAT audio, cv | -10 to 10 V, bipolar impedance 50000 Ω | → ADC, Tx selected by AUDIO/CV 7-8 = AUDIO, AUDIO/CV 7-8 = CV In 2 modes
|
| Rx 1826 | ADAT optical input audio, cv | — | → DAC, sample clock |
The documents don't state: voltage, impedance (Rx); normalling (IN 1, IN 2, IN 3, IN 4, IN 5, IN 6, IN 7, IN 8).
Outputs 9
| Jack | What it does | Range | Connections |
|---|---|---|---|
| OUT 1 1826 | decoded ADAT channel audio, cv | -10 to 10 V, bipolar coupling dc | from DAC, Rx |
| OUT 2 1826 | decoded ADAT channel audio, cv | -10 to 10 V, bipolar coupling dc | from DAC, Rx |
| OUT 3 1826 | decoded ADAT channel audio, cv | -10 to 10 V, bipolar coupling dc | from DAC, Rx |
| OUT 4 1826 | decoded ADAT channel audio, cv | -10 to 10 V, bipolar coupling dc | from DAC, Rx |
| OUT 5 1826 | decoded ADAT channel audio, cv | -10 to 10 V, bipolar coupling dc | from DAC, Rx |
| OUT 6 1826 | decoded ADAT channel audio, cv | -10 to 10 V, bipolar coupling dc | from DAC, Rx |
| OUT 7 1826 | decoded ADAT channel audio, cv | -10 to 10 V, bipolar coupling dc | from DAC, Rx |
| OUT 8 1826 | decoded ADAT channel audio, cv | -10 to 10 V, bipolar coupling dc | from DAC, Rx |
| Tx 1826 | ADAT optical output audio, cv | — | from ADC |
The documents don't state: voltage (Tx); impedance (all outputs).
Controls 7
| Control | What it does | Affects | Positions |
|---|---|---|---|
| AUDIO/CV 1-2 1826 | input pair conversion mode switch | IN 1, IN 2, ADC |
|
| AUDIO/CV 3-4 1826 | input pair conversion mode switch | IN 3, IN 4, ADC |
|
| AUDIO/CV 5-6 1826 | input pair conversion mode switch | IN 5, IN 6, ADC |
|
| AUDIO/CV 7-8 1826 | input pair conversion mode switch | IN 7, IN 8, ADC |
|
| SYNC 1826 | sample clock source switch | sample clock |
|
| RATE 1826 | internal sample rate switch | sample clock |
|
| +5 V jumper 1826 | +5V source select jumper | — |
|
Blocks 3
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| ADC | Cirrus Logic ADC | Input / preamp stage, MIDI / USB interface | IN 1, IN 2, IN 3, IN 4, IN 5, IN 6, IN 7, IN 8 | AUDIO/CV 1-2, AUDIO/CV 3-4, AUDIO/CV 5-6, AUDIO/CV 7-8 | Tx | 1826 |
| DAC | ADAT decoder outputs | Output / interface stage, MIDI / USB interface | Rx | — | OUT 1, OUT 2, OUT 3, OUT 4, OUT 5, OUT 6, OUT 7, OUT 8 | 1826 |
| sample clock | on-board sample clock | — | Rx | SYNC, RATE | — | 1826 |
Modes 6
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| AUDIO | input conversion mode | AUDIO/CV switch = AUDIO | per input pair | 1826 |
| CV | input conversion mode | AUDIO/CV switch = CV | per input pair | 1826 |
| INT | sample clock sync | SYNC = INT | — | 1826 |
| EXT | sample clock sync | SYNC = EXT | — | 1826 |
| 96 kHz S/MUX | higher sample rate | — | EXT sync from ADAT source | 1826 |
| 192 kHz S/MUX | higher sample rate | — | EXT sync from ADAT source | 1826 |
Specs 19
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 10 HP | — | 1826 |
| module | depth | 38 mm | — | 1826 |
| module | weight | 113 g | — | 1826 |
| module | +12V current | 260 mA | +5V from OPTX | 1826 |
| module | -12V current | 130 mA | +5V from OPTX | 1826 |
| module | +12V current | 130 mA | +5V from CASE | 1826 |
| module | -12V current | 130 mA | +5V from CASE | 1826 |
| module | +5V current | 270 mA | +5V from CASE | 1826 |
| converters | resolution | 24 bit | — | 1826 |
| sample clock | sample rate | 44.1 kHz | RATE 44.1 | 1826 |
| sample clock | sample rate | 48 kHz | RATE 48 | 1826 |
| I/O | max level | -10 to 10 V | — | 1826 |
| I/O | max level | 20 Vpp | — | 1826 |
| inputs | SNR | ≥ 103 dB | — | 1826 |
| I/O | 10 Vpp signal level | -6 dBFS | — | 1826 |
| CV mode | self-calibration period | 5 s | — | 1826 |
| ADAT | channels | 8 count | 44.1/48 kHz | 1826 |
| ADAT | channels | 4 count | 96 kHz | 1826 |
| ADAT | channels | 2 count | 192 kHz | 1826 |
Properties 10
| Subject | Property | Value | Source |
|---|---|---|---|
| ADAT | direction | bi-directional | 1826 |
| OUT 1-8 | LEDs | dual polarity/strength | 1826 |
| OUT 1-8 | coupling | DC | 1826 |
| Rx/Tx | connector | TOSLINK optical | 1826 |
| SYNC | default | EXT | 1826 |
| RATE | default | 48 | 1826 |
| SYNC | location | rear DIP switch | 1826 |
| RATE | location | rear DIP switch | 1826 |
| +5 V jumper | location | rear | 1826 |
| EXT SYNC LED | colour | blue | 1826 |
Behavior 10
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| input pair | switched to CV | 5 s self-calibration | — | 1826 |
| input pair | AUDIO mode | ADC high-pass, no DC | — | 1826 |
| EXT sync | valid ADAT signal present | EXT SYNC LED lit | — | 1826 |
| Tx | INT sync, no Rx | one-way ADAT output | — | 1826 |
| 96/192 kHz | on-board clock | not supported, needs EXT | — | 1826 |
| inputs | 96 or 192 kHz | mixed to available channels | — | 1826 |
| outputs | 96 or 192 kHz | copies of available channels | — | 1826 |
| two Optx linked | interconnected | one INT, one EXT | — | 1826 |
| +5 V jumper | OPTX | +5V from +12V rail | — | 1826 |
| +5 V jumper | CASE | uses case +5V | — | 1826 |
Functions 1
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| External Audio I/O | block | patchable | ADAT converter interfaces audio interface | 1826 |
Power
| +12 V | 260 mA |
|---|---|
| −12 V | 130 mA |
| +5 V | 270 mA |
| Width | 10 HP |
| Depth | 38 mm |
Other External Audio I/O modules
Sources 1
- [1826]