alm-busy-circuits/pip-filter
ALM Busy Circuits Pip Filter Lowpass Filter · VCA
4 HP lowpass filter and VCA by ALM Busy Circuits: 5 inputs, 1 output, 3 controls.
ALM Busy Circuits · ALM039 'Pip Filter' Operation Manual (PDF) ↗
Inputs 5
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Audio input 1041 | filter audio input audio | — | → filter |
| Freq CV 1 1041 | cutoff CV cv | 0 to 5 V | → filter attenuated by Freq CV attenuverter |
| Freq CV 2 1041 | cutoff CV, rough V/Oct cv, pitch | 0 to 8 V scaling v oct | → filter |
| TRIG 1041 | ping trigger trigger, gate | — | → filter |
| VCA 1041 | output volume CV cv | 0 to 5 V | → VCA |
The documents don't state: voltage (Audio input, TRIG); threshold (TRIG); coupling (Audio input); impedance (all inputs).
Outputs 1
The documents don't state: voltage, impedance (AUDIO OUT).
Controls 3
Blocks 2
Specs 5
Properties 7
Behavior 6
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| TRIG | rising edge | pings filter once | — | 1041 |
| TRIG | long gate held | no double ping | — | 1041 |
| ping | resonance just below self-oscillation | plucked sound | — | 1041 |
| ping | no audio input | still produces sound | — | 1041 |
| RESONANCE | fully up | self-oscillates without input | — | 1041 |
| VCA input | unpatched | stays fully open | — | 1041 |
Functions 3
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Lowpass Filter | block | patchable | block filter: 2 pole low-pass | 1041 |
| Self-Oscillating Filter | property | patchable | resonance fully up: self-oscillates | 1041 |
| VCA | block | patchable | block VCA: built in VCA with CV input | 1041 |
Power
| +12 V | 25 mA |
|---|---|
| −12 V | 25 mA |
| +5 V | — |
| Width | 4 HP |
| Depth | 32 mm |
Other Lowpass Filter modules
Sources 2
- [1041]
-
[1042]
ALM Busy Circuits Pip Filter product page ↗product page⚠ verified 2026-05-29 · the manufacturer changed this document since