ajh-synth/ring-sm
AJH Synth Ring SM Distortion / Saturation · Ring Modulator
14 HP distortion / saturation and ring modulator by AJH Synth: 8 inputs, 1 output, 10 controls, 1 mode.
AJH Synth · Ring SM manual (PDF) ↗
Ring Modulator · Sub Oscillator · Mixer · Distortion / Saturation
Inputs 8
| Jack | What it does | Range | Connections |
|---|---|---|---|
| X IN 1822 | carrier input audio | -5 to 5 V, bipolar coupling ac | → Ring modulator core, Sub Bass -1, Sub Bass -2, Mixer attenuated by X Input Level |
| Y IN 1822 | modulator 1 input audio | -5 to 5 V, bipolar coupling ac | → Ring modulator core, Mixer attenuated by Y Input Level |
| Z IN 1822 | modulator 2 input audio | -5 to 5 V, bipolar coupling ac audio rate yes | → Ring modulator core attenuated by Z Input Level |
| IN 1 1822 | mixer channel 1 audio, cv | -5 to 5 V, bipolar coupling dc | normalled from Ring modulator core → Mixer attenuated by RM LEVEL |
| IN 2 1822 | mixer channel 2 audio, cv | -5 to 5 V, bipolar coupling dc | normalled from X IN → Mixer attenuated by X MIX |
| IN 3 1822 | mixer channel 3 audio, cv | -5 to 5 V, bipolar coupling dc | normalled from Y IN → Mixer attenuated by Y MIX |
| IN 4 1822 | mixer channel 4 audio, cv | -5 to 5 V, bipolar coupling dc | normalled from Sub Bass -1 → Mixer attenuated by SUB-1 |
| IN 5 1822 | mixer channel 5 (hot) audio, cv | -2.5 to 2.5 V, bipolar coupling dc | normalled from Sub Bass -2 → Mixer, Hot channel 5 attenuated by SUB-2 |
The documents don't state: impedance (all inputs).
Outputs 1
| Jack | What it does | Range | Connections |
|---|---|---|---|
| OUT 1822 | main mixer output audio, cv | -6 to 6 V, bipolar | from Mixer attenuated by OUT LEVEL |
The documents don't state: impedance (OUT).
Controls 10
| Control | What it does | Affects | Positions |
|---|---|---|---|
| X Input Level 1822 | carrier level to RM knob | X IN, Ring modulator core | — |
| Y Input Level 1822 | modulator 1 level knob | Y IN, Ring modulator core | — |
| Z Input Level 1822 | modulator 2 level knob | Z IN, Ring modulator core | — |
| RM LEVEL 1822 | mixer channel 1 level knob | Mixer, IN 1 | In 2 modes
|
| X MIX 1822 | mixer channel 2 level knob | Mixer, IN 2 | In 2 modes
|
| Y MIX 1822 | mixer channel 3 level knob | Mixer, IN 3 | In 2 modes
|
| SUB-1 1822 | mixer channel 4 level knob | Mixer, IN 4 | In 2 modes
|
| SUB-2 1822 | mixer channel 5 level knob | Mixer, IN 5 | In 2 modes
|
| OUT LEVEL 1822 | overall output level knob | OUT, Mixer | — |
| DOUBLE 1822 | frequency double select switch | Ring modulator core, X IN, Y IN |
|
Blocks 5
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Ring modulator core | four quadrant multiplier | Ring modulator | X IN, Y IN, Z IN | X Input Level, Y Input Level, Z Input Level, DOUBLE | — | 1822 |
| Sub Bass -1 | sub bass generator | Sub-oscillator | X IN | SUB-1 | — | 1822 |
| Sub Bass -2 | sub bass generator | Sub-oscillator | X IN | SUB-2 | — | 1822 |
| Mixer | five input DC mixer | Mixer | IN 1, IN 2, IN 3, IN 4, IN 5 | RM LEVEL, X MIX, Y MIX, SUB-1, SUB-2, OUT LEVEL | OUT | 1822 |
| Hot channel 5 | clipping / distortion module | Distortion / saturation | IN 5 | SUB-2 | OUT | 1822 |
Modes 1
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| Frequency double | ring mod mode | DOUBLE = down | switch | 1822 |
Specs 15
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 14 HP | — | 1822 |
| module | depth | 24 mm | — | 1822 |
| module | depth with power cable | 34 mm | — | 1822 |
| module | panel height | 128.5 mm | — | 1822 |
| module | +12V current | 55 mA | — | 1822 |
| module | -12V current | 50 mA | — | 1822 |
| inputs | tolerated level | ≤ 10 V | +/-10V, may clip | 1822 |
| Sub Bass generators | useful frequency | ≤ 1000 Hz | — | 1822 |
| Sub Bass -1 | octave offset | -1 octaves | — | 1822 |
| Sub Bass -2 | octave offset | -2 octaves | — | 1822 |
| Frequency double | octave offset | 1 octaves | — | 1822 |
| Mixer | unity gain channel position | 9 dial position | OUT LEVEL at 10; ch1-4 | 1822 |
| Mixer | unity gain channel position | 8 dial position | OUT LEVEL at 10; ch5 | 1822 |
| Hot channel 5 | overdrive onset position | 7 to 8 dial position | +/-5V input | 1823 |
| Sub Bass generators | lock time | 1 cycles | — | 1822 |
Properties 15
| Subject | Property | Value | Source |
|---|---|---|---|
| Ring modulator core | circuit | discrete transistor Gilbert cell | 1822 |
| Ring modulator inputs | coupling | AC | 1822 |
| Z IN | character | more resonant than Y | 1823 |
| Z IN | phase relationship | differs from Y | 1823 |
| X, Y, Z inputs | simultaneous use | yes | 1822 |
| Sub Bass waveform | shape | shaped sine / trapezoid | 1822 |
| Sub Bass waveform | depends on X shape | no | 1822 |
| Sub Bass detection | method | positive zero crossing | 1823 |
| Mixer | coupling | DC | 1822 |
| Mixer | polarity | non-inverting | 1822 |
| Mixer | design basis | CP3 discrete transistor | 1822 |
| Hot channel 5 | clipping | fairly symmetrical hard clipping | 1822 |
| power | reverse protection | yes | 1823 |
| power header | type | 10 way | 1823 |
| Bias Trimmers | user adjustment | manufacturer only | 1822 |
Behavior 23
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| IN 1 | unpatched | RM output normalled | — | 1822 |
| IN 1 | patched | RM output disconnected | — | 1822 |
| IN 2 | unpatched | X IN normalled | — | 1822 |
| IN 3 | unpatched | Y IN normalled | — | 1822 |
| IN 4 | unpatched | Sub Bass -1 normalled | — | 1822 |
| IN 5 | unpatched | Sub Bass -2 normalled | — | 1822 |
| IN 2-5 | patched | normalled source disconnected | — | 1822 |
| X MIX / Y MIX | through signal used | X/Y Input Level ignored | — | 1822 |
| Sub Bass generators | always | X Input Level ignored | — | 1822 |
| DOUBLE | switched down | X connected to Y | — | 1822 |
| Frequency double | sine or triangle input | RM output one octave up | — | 1822 |
| Frequency double | high harmonic content input | doubling may fail | — | 1822 |
| Sub Bass generators | no X input | produce random sound | — | 1822 |
| Sub Bass generators | complex or noisy X input | tracking may mistrigger | — | 1822 |
| Sub Bass waveform | lower frequencies | rounded trapezoid shape | — | 1822 |
| Sub Bass waveform | 100Hz and above | more sine-like | — | 1822 |
| Sub Bass generators | higher frequencies | level falls off | — | 1822 |
| Mixer | channel knob at 10 | clips with single input | — | 1822 |
| Mixer | unused channel knobs up | noise bleed-through | — | 1822 |
| Mixer | DC bias on channel | asymmetric clipping | — | 1822 |
| IN 5 | signal exceeds threshold | hard clips earlier | — | 1822 |
| Sub Bass -2 | routed to mixer | lower level compensates hot channel | — | 1822 |
| RM inputs | fixed CV applied | no useful effect | — | 1822 |
Functions 4
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Ring Modulator | block | patchable | block Ring modulator core: four quadrant multiplier | 1822 |
| Sub Oscillator | block | patchable | block Sub Bass -1: -1 octave from X | 1822 |
| Mixer | block | patchable | block Mixer: five input DC mixer | 1822 |
| Distortion / Saturation | block | patchable | block Hot channel 5: clipping / distortion module | 1822 |
Power
| +12 V | 55 mA |
|---|---|
| −12 V | 50 mA |
| +5 V | — |
| Width | 14 HP |
| Depth | 24 mm |
Other Distortion / Saturation modules
Sources 2
- [1822]
- [1823]