4ms/quad-pingable-lfo

4ms Quad Pingable LFO LFO · ADSR Envelope

12 HP LFO and ADSR envelope by 4ms: 13 inputs, 5 outputs, 20 controls, 8 modes.

4ms · Quad Pingable LFO User Manual (PDF) ↗

LFO · Tempo / Clock Sync · Master Clock · ADSR Envelope · Unipolar/bipolar switch

Inputs 13

Inputs
JackWhat it doesRangeConnections
Ping 1 379sets tempo (external clock)
clock, trigger
threshold 2.5 V
audio rate yes
normalled from PING header channel 1
→ LFO 1
Reset 1 379restarts LFO (rising edge)
trigger, gate
threshold 2.5 V
→ LFO 1
In 2 modes
  • One-shot mode: fires one-shot waveform → LFO 1
  • Floating Reset mode: held high: no re-sync → LFO 1
Skew CV 1 379waveshape (rise/fall ratio)
cv
0 to 10 V, unipolar
→ Skew 1
Ping 2 379sets tempo (external clock)
clock, trigger
threshold 2.5 V
audio rate yes
normalled from PING header channel 2
→ LFO 2
Reset 2 379restarts LFO (rising edge)
trigger, gate
threshold 2.5 V
→ LFO 2
In 2 modes
  • One-shot mode: fires one-shot waveform → LFO 2
  • Floating Reset mode: held high: no re-sync → LFO 2
Skew CV 2 379waveshape (rise/fall ratio)
cv
0 to 10 V, unipolar
→ Skew 2
Ping 3 379sets tempo (external clock)
clock, trigger
threshold 2.5 V
audio rate yes
normalled from PING header channel 3
→ LFO 3
Reset 3 379restarts LFO (rising edge)
trigger, gate
threshold 2.5 V
→ LFO 3
In 2 modes
  • One-shot mode: fires one-shot waveform → LFO 3
  • Floating Reset mode: held high: no re-sync → LFO 3
Skew CV 3 379waveshape (rise/fall ratio)
cv
0 to 10 V, unipolar
→ Skew 3
Ping 4 379sets tempo (external clock)
clock, trigger
threshold 2.5 V
audio rate yes
normalled from PING header channel 4
→ LFO 4
Reset 4 379restarts LFO (rising edge)
trigger, gate
threshold 2.5 V
→ LFO 4
In 2 modes
  • One-shot mode: fires one-shot waveform → LFO 4
  • Floating Reset mode: held high: no re-sync → LFO 4
Skew CV 4 379waveshape (rise/fall ratio)
cv
0 to 10 V, unipolar
→ Skew 4
PING header 379ping normalization header
clock
—
→ Ping 1, Ping 2, Ping 3, Ping 4

The documents don't state: voltage (Ping 1, Reset 1, Ping 2, Reset 2, Ping 3, Reset 3, Ping 4, Reset 4, PING header); threshold (PING header); coupling, impedance (all inputs).

Outputs 5

Outputs
JackWhat it doesRangeConnections
OUT 1 379LFO output
cv
-5 to 10 V
audio rate yes
from LFO 1
selected by Bipolar/Unipolar jumper = UNI, Bipolar/Unipolar jumper = BI
In 2 modes
  • Unipolar: 0V to +10V
  • Bipolar: -5V to +5V
OUT 2 379LFO output
cv
-5 to 10 V
audio rate yes
from LFO 2
selected by Bipolar/Unipolar jumper = UNI, Bipolar/Unipolar jumper = BI
In 2 modes
  • Unipolar: 0V to +10V
  • Bipolar: -5V to +5V
OUT 3 379LFO output
cv
-5 to 10 V
audio rate yes
from LFO 3
selected by Bipolar/Unipolar jumper = UNI, Bipolar/Unipolar jumper = BI
In 2 modes
  • Unipolar: 0V to +10V
  • Bipolar: -5V to +5V
OUT 4 379LFO output
cv
-5 to 10 V
audio rate yes
from LFO 4
selected by Bipolar/Unipolar jumper = UNI, Bipolar/Unipolar jumper = BI
In 2 modes
  • Unipolar: 0V to +10V
  • Bipolar: -5V to +5V
OUTS header 379LFO signals header
cv
0 to 10 V
from LFO 1, LFO 2, LFO 3, LFO 4

The documents don't state: coupling, impedance (all outputs).

Controls 20

Controls
ControlWhat it doesAffectsPositions
Ping button 1 379tap tempo
button
LFO 1
  • tap twice: sets tempo, free-running
  • tap-tap-hold 2 s: stops clock, arms one-shot
On button 1 379on/mute (latching)
button
OUT 1
  • on (lit): output enabled
  • off: output muted
Skew 1 379waveshape, offsets Skew CV
knob · 0 to 100 %
LFO 1
  • 0%: 10ms trigger
  • 1%: near-exponential pluck
  • ~3%: linear ramp-down
  • 50%: triangle
  • 100%: ramp-up
Fire-on-unmute jumper 1 379reset on unmute
jumper
LFO 1
  • installed: On button fires reset
  • not installed: unmute without reset (default)
Ping button 2 379tap tempo
button
LFO 2
  • tap twice: sets tempo, free-running
  • tap-tap-hold 2 s: stops clock, arms one-shot
On button 2 379on/mute (latching)
button
OUT 2
  • on (lit): output enabled
  • off: output muted
Skew 2 379waveshape, offsets Skew CV
knob · 0 to 100 %
LFO 2
  • 0%: 10ms trigger
  • 1%: near-exponential pluck
  • ~3%: linear ramp-down
  • 50%: triangle
  • 100%: ramp-up
Fire-on-unmute jumper 2 379reset on unmute
jumper
LFO 2
  • installed: On button fires reset
  • not installed: unmute without reset (default)
Ping button 3 379tap tempo
button
LFO 3
  • tap twice: sets tempo, free-running
  • tap-tap-hold 2 s: stops clock, arms one-shot
On button 3 379on/mute (latching)
button
OUT 3
  • on (lit): output enabled
  • off: output muted
Skew 3 379waveshape, offsets Skew CV
knob · 0 to 100 %
LFO 3
  • 0%: 10ms trigger
  • 1%: near-exponential pluck
  • ~3%: linear ramp-down
  • 50%: triangle
  • 100%: ramp-up
Fire-on-unmute jumper 3 379reset on unmute
jumper
LFO 3
  • installed: On button fires reset
  • not installed: unmute without reset (default)
Ping button 4 379tap tempo
button
LFO 4
  • tap twice: sets tempo, free-running
  • tap-tap-hold 2 s: stops clock, arms one-shot
On button 4 379on/mute (latching)
button
OUT 4
  • on (lit): output enabled
  • off: output muted
Skew 4 379waveshape, offsets Skew CV
knob · 0 to 100 %
LFO 4
  • 0%: 10ms trigger
  • 1%: near-exponential pluck
  • ~3%: linear ramp-down
  • 50%: triangle
  • 100%: ramp-up
Fire-on-unmute jumper 4 379reset on unmute
jumper
LFO 4
  • installed: On button fires reset
  • not installed: unmute without reset (default)
Bipolar/Unipolar jumper 379output range, all channels
jumper
OUT 1, OUT 2, OUT 3, OUT 4
  • UNI: 0V to +10V (default)
  • BI: -5V to +5V
Threshold trimpot 379Ping/Reset comparator threshold
other · 0 to 5 V
Ping 1, Ping 2, Ping 3, Ping 4, Reset 1, Reset 2, Reset 3, Reset 4
  • fully CCW: 5.0V
  • center: 2.5V
  • fully CW: 0V, no response
LED Dim trimpot 379LED brightness
other
——
5V source jumper 380+5V source select
jumper
—
  • external: +5V from rail
  • internal: +5V from +12V

Blocks 4

Blocks and their connections
BlockKindTypesInputsControlsOutputsSource
LFO 1pingable LFOLFOPing 1, Reset 1, Skew CV 1Ping button 1, On button 1, Skew 1OUT 1379
LFO 2pingable LFOLFOPing 2, Reset 2, Skew CV 2Ping button 2, On button 2, Skew 2OUT 2379
LFO 3pingable LFOLFOPing 3, Reset 3, Skew CV 3Ping button 3, On button 3, Skew 3OUT 3379
LFO 4pingable LFOLFOPing 4, Reset 4, Skew CV 4Ping button 4, On button 4, Skew 4OUT 4379

Modes 8

Modes
ModeKindSelected bySelection methodSource
Tap tempotempo source—tap Ping button379
External pingtempo source—signal on Ping jack379
One-shot modetriggered single cycle—stop clock, unmuted379
Multi-shot modeclocked reset bursts—clock into Reset, armed379
Floating Reset modeno auto re-sync—hold Reset high379
Fire-on-unmutereset on unmuteFire-on-unmute jumper = installed—379
Unipolaroutput rangeBipolar/Unipolar jumper = UNI—379
Bipolaroutput rangeBipolar/Unipolar jumper = BI—379

Hidden functions 3

Hidden functions
FunctionTriggerAffectsSource
stop tap clockhold Ping button 2 secondsLFO379
Floating Reset via cablebare cable in ResetLFO379
clear Reset Lock Pointspeed up ping past offsetLFO379

Specs 27

Specs
SubjectQuantityValueConditionSource
LFOslowest period71 min—379
LFOslowest frequency0.0002 Hz—379
LFOfastest frequency500 Hz—379
LFOmarginal tracking≤ 1000 Hz—379
Skew 0%trigger pulse width10 ms—379
Skewtriangle CV5 Vabout, 50% skew379
Skewramp-up CV10 Vabout, 100% skew379
Skew CVfull range10 V—379
Skewtrigger setting≤ 200 mVknob 7:00379
Skewpluck setting500 mVknob ~7:35379
OUTunipolar range0 to 10 V—379
OUTbipolar range-5 to 5 V—379
Threshold trimpotrange0 to 5 V—379
Threshold trimpotfactory default2.5 V—379
Threshold trimpotLZX setting0.8 V—379
Ping buttonstop-clock hold2 s—379
modulewidth12 HP—379
moduledepth with cable26.4 mmmanual379
moduledepth without cable21.6 mmmanual379
moduledepth40 mmproduct page380
power-12V current≤ 37 mAmanual379
power-12V current≤ 73 mAproduct page380
power+12V current≤ 89 mAexternal 5V380
power+12V current≤ 154 mAinternal 5V380
power+5V current≤ 65 mAexternal 5V380
OUTS headerpins8 pins—380
PING headerpins8 pins—379

Properties 19

Properties
SubjectPropertyValueSource
channelscount4 independent LFOs379
Skewperiodunchanged379
Skew 0%curvequadratic379
Skew knobroleoffset for Skew CV379
Ping/Reset inputsdetectorcomparator379
Ping/Reset inputsaccepted waveshapeany379
tap tempoclock behaviorfree-running379
external pingclock behaviorauto-stopping379
Resetedgerising379
Reset Lock Pointmeasured astime after ping379
OUT LEDdisplayfollows output signal379
Ping buttondisplayflashes to tempo379
On buttonwhen mutedLFO runs in background379
Bipolar/Unipolar jumperscopeall four channels379
OUTS headersignalsame as OUT jacks379
OUTS headercompatibleVCA Matrix, SISM, Mixiplexer379
PING headercompatibleQuad Clock Distributor379
powerreverse protectionyes379
power+5V railnot used379

Behavior 19

Behavior rules
SubjectWhenEffectModeSource
Ping jacksignal recognizedtap tempo clock turned off—379
tap temponew tempo tappedtap tempo re-enabled—379
Ping jacknothing plugged inPING header clocks channel—379
external clockclock stopsoutput stops, timing remembered—379
Resettrigger receivedLFO restarts, tempo unchanged—379
Resetpulse while Skew modulatedforces reset—379
Resetgate held highFloating Reset: no re-syncFloating Reset mode379
Resetpulse, clock stopped, unmutedfires one-shotOne-shot mode379
Resetclock into Reset, armedshape length from pingMulti-shot mode379
outputpower-up without resetstarts on ping—379
outputno Skew modulationauto-resets on ping/lock point—379
auto re-syncSkew actively modulatedsuspended until Skew steady—379
Reset Lock Pointping slowersame absolute delay kept—379
Reset Lock Pointping faster than offsetcleared to 0ms—379
On buttonjumper installed, turned onfires reset pulse—379
On buttonjumper absent, turned onunmutes without reset—379
Threshold trimpotfully CW (0V)no Ping/Reset response—379
Floating Resetping clock stopsoutput still stops—379
Skewjust above 0%near-exponential pluck—379

Functions 5

Function tags
FunctionBasisScopeEvidenceSource
LFOblockpatchablefour pingable LFO channels, OUT jacks379
Tempo / Clock SyncjackpatchablePing jack / tap tempo set speed379
Master Clockdocumented usepatchabledocumented: master tap clock379
ADSR EnvelopemodepatchableOne-shot mode: Reset fires envelope379
Unipolar/bipolar switchcontrolpatchableBipolar/Unipolar jumper379

Power

+12 V86 mA
−12 V37 mA
+5 V65 mA
Width12 HP
Depth26 mm

Other LFO modules

All LFO modules →

Firmware 1

VersionReleasedNotes
1.02013-04-25379

Sources 2

  1. [379]
    Quad Pingable LFO User Manual ↗manual · primary
    ● verified 2026-05-15
  2. [380]
    4ms Company Quad Pingable LFO product page ↗product page
    ⚠ verified 2026-05-15 · the manufacturer changed this document since