wmd/clutch
WMD Clutch Drum Voice · Sample Player
8 HP drum voice and sample player by WMD: 9 inputs, 1 output, 11 controls, 2 modes.
Inputs 9
| Jack | What it does | Range | Connections |
|---|---|---|---|
| CLSD 864 | closed hi-hat trigger trigger, gate | impedance 100000 Ω | → Surface A, Surface B |
| OPEN 864 | open hi-hat trigger trigger, gate | impedance 100000 Ω | → Surface A, Surface B |
| CHOKE 864 | stops sound trigger | impedance 100000 Ω | → release envelope |
| PITCH A 864 | Surface A pitch cv | impedance 100000 Ω | → PITCH A |
| A/B 864 | A/B crossfade cv | impedance 100000 Ω | → A/B |
| SRF A 864 | Surface A sample select cv | impedance 100000 Ω | → SURFACE A |
| RELEASE 864 | release time cv | impedance 100000 Ω | → RELEASE |
| VELOCITY 864 | global velocity cv | impedance 100000 Ω | → Surface A, Surface B |
| FX PRM 864 | FX parameter cv | impedance 100000 Ω | → FX |
The documents don't state: voltage, polarity, scaling, threshold, coupling, audio rate (all inputs).
Outputs 1
| Jack | What it does | Range | Connections |
|---|---|---|---|
| OUT 864 | final mono output audio | audio rate yes impedance 470 Ω | from Surface A, Surface B, HPF, LPF, FX |
The documents don't state: polarity, coupling (OUT).
Controls 11
| Control | What it does | Affects | Positions |
|---|---|---|---|
| SURFACE A 864 | Surface A sample select knob | Surface A |
|
| PITCH A 864 | Surface A pitch knob | Surface A | — |
| RELEASE 864 | global release knob | release envelope | — |
| A/B 864 | Surface A/B crossfade knob | Surface A, Surface B | — |
| BALANCE / RELEASE OFFSET / HPF 864 | function of knob below switch | Multifunction knob 1 |
|
| Multifunction knob 1 864 | BAL/R. OFFSET/HPF function knob | release envelope, HPF | In 3 modes
|
| SURFACE B / PITCH B / LPF 864 | function of knob below switch | Multifunction knob 2 |
|
| Multifunction knob 2 864 | SRFB/PITCH B/LPF function knob | Surface B, LPF | In 3 modes
|
| BANK BUTTON 864 | SD card bank select button | Surface A, FX |
|
| ACCENT / FEEL / FX SWITCH 864 | accent, feel, FX select switch | FEEL, FX |
In 1 mode
|
| CV Disable 864 | cuts CV modulation switch | PITCH A, A/B, SRF A, RELEASE, VELOCITY, FX PRM |
|
Blocks 7
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Surface A | memory card sample layer | Sampler, Drum voice | CLSD, OPEN, SRF A, PITCH A | SURFACE A, PITCH A, BANK BUTTON | OUT | 864 |
| Surface B | built-in sample layer | Sampler, Drum voice | CLSD, OPEN | SURFACE B / PITCH B / LPF | OUT | 864 |
| release envelope | release control | — | RELEASE, CHOKE | RELEASE, BALANCE / RELEASE OFFSET / HPF | OUT | 864 |
| HPF | high-pass filter | Filter | — | BALANCE / RELEASE OFFSET / HPF | OUT | 864 |
| LPF | low-pass filter | Filter | — | SURFACE B / PITCH B / LPF | OUT | 864 |
| FX | hi-hat-optimized effects | Multi-effect / DSP platform | FX PRM | BANK BUTTON, ACCENT / FEEL / FX SWITCH | OUT | 864 |
| FEEL | rhythmic feel patterns | — | — | ACCENT / FEEL / FX SWITCH | — | 864 |
Modes 2
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| FX Mode | effect editing | — | hold BANK BUTTON | 864 |
| Gate / Trigger Mode | trigger input behavior | — | HIHAT.INI setting | 864 |
Specs 16
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 8 HP | — | 864 |
| module | depth | 38 mm | incl power cable | 864 |
| module | +12V current | 82 mA | — | 864 |
| module | -12V current | 17 mA | — | 864 |
| CV inputs | range | 5 V | — | 864 |
| OUT | amplitude | 22 Vpp | — | 864 |
| OUT | bit depth | 16 bit | — | 864 |
| OUT | sample rate | 48 kHz | — | 864 |
| module | latency | ≤ 2 ms | — | 864 |
| internal processing | bit depth | 32 bit | — | 864 |
| internal processing | sample rate | 48 kHz | — | 864 |
| Surface A | banks | 8 banks | — | 864 |
| Surface A | sample pairs per bank | 16 pairs | — | 864 |
| Surface B | built-in sample pairs | 9 pairs | — | 864 |
| FEEL | pattern length | 1 to 32 steps | HIHAT.INI custom patterns | 864 |
| settings save | inactivity delay | 1 min | — | 864 |
Properties 8
| Subject | Property | Value | Source |
|---|---|---|---|
| CV inputs | combination | sum with pots | 864 |
| Surface B | CV control | none | 864 |
| HPF / LPF | active | always | 864 |
| sample playback | interpolation | four-point spline | 864 |
| Surface A | sample source | memory card, user loadable | 864 |
| BANK BUTTON LED | color | matches SD folder | 864 |
| firmware | updatable | yes | 864 |
| LED colors | customizable | yes | 864 |
Behavior 8
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| CLSD + OPEN | triggered simultaneously | accented hit | — | 864 |
| CHOKE | triggered | sound stops, quick envelope | — | 864 |
| SURFACE A | trigger arrives | sample selection sampled | — | 864 |
| CV Disable | switched on | modulation cut, knobs only | — | 864 |
| settings | 1 minute inactivity | saved | — | 864 |
| R. OFFSET | increased | closed sound shortened | — | 864 |
| FX Mode | active | LED flashes effect color | — | 864 |
| BANK BUTTON LED | bank selected | color shows folder | — | 864 |
Functions 3
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Drum Voice | block | patchable | block Surface A/B: hi-hat sample layers | 864 |
| Sample Player | block | patchable | block Surface A: memory card samples | 864 |
| Crossfader | control | internal | control A/B: crossfades Surface A/B | 864 |
Power
| +12 V | 82 mA |
|---|---|
| −12 V | 17 mA |
| +5 V | — |
| Width | 8 HP |
| Depth | 38 mm |
Other Drum Voice modules
Firmware 1
| Version | Released | Notes |
|---|---|---|
| 1.00 | — | 864 |
Sources 1
-
[864]
WMD Clutch product page ↗product page · primary⚠ verified 2026-05-24 · the manufacturer changed this document since