noise-engineering/loquelic-iteritas

Noise Engineering Loquelic Iteritas Digital / Wavetable Oscillator · Wavefolder

10 HP digital / wavetable oscillator and wavefolder by Noise Engineering: 7 inputs, 1 output, 11 controls, 3 modes.

Noise Engineering · Loquelic Iteritas Manual ↗

Digital / Wavetable Oscillator · 1V/Oct Pitch Tracking · Oscillator Sync · Waveshape Morphing · Wavefolder

Inputs 7

Inputs
JackWhat it doesRangeConnections
Pitch A 251oscillator A 1V/oct
pitch
0 to 8 V
scaling v oct
normalled from Pitch B
→ oscillator A
In 1 mode
  • VO: carrier fundamental → oscillator A
Pitch B 251oscillator B 1V/oct
pitch
0 to 8 V
scaling v oct
normalled from Pitch A
→ oscillator B
In 1 mode
  • VO: decay retrigger frequency → oscillator B
Damp 251Damp CV
cv
0 to 5 V
→ Damp
Modulate 251Mod CV
cv
0 to 5 V
→ Mod
Fold 251Fold CV
cv
0 to 5 V
→ Fold, wave folder
Morph 251Morph CV
cv
0 to 5 V
→ Morph
Sync 251oscillator reset
trigger
threshold 2 V
→ oscillator A, oscillator B

The documents don't state: voltage (Sync); polarity, scaling, audio rate (Damp, Modulate, Fold, Morph); coupling (Pitch A, Pitch B, Damp, Modulate, Fold, Morph); impedance (all inputs).

Outputs 1

Outputs
JackWhat it doesRangeConnections
Out 251audio output
audio
coupling ac
audio rate yes
from wave folder

The documents don't state: voltage, impedance (Out).

Controls 11

Controls
ControlWhat it doesAffectsPositions
Pitch A coarse 251oscillator A coarse pitch
knob
oscillator A—
Pitch A fine 251oscillator A fine pitch
knob
oscillator A—
Pitch B coarse 251oscillator B coarse pitch
knob
oscillator B—
Pitch B fine 251oscillator B fine pitch
knob
oscillator B—
Damp 251tone control
knob
oscillator A, oscillator B, algorithm engine
In 3 modes
  • VO: oscillator B decay constant → oscillator B
  • SS: summation a parameter → algorithm engine
  • PM: A/B blend via product → algorithm engine
Mod 251phase modulation amount
knob
oscillator A, oscillator B
In 3 modes
  • VO: B phase-modulates A → oscillator A
  • SS: B phase-modulates A → oscillator A
  • PM: oscillators modulate each other → oscillator A, oscillator B
Fold 251wavefold threshold
knob
wave folder—
Morph 251sine/triangle/saw waveform
knob
oscillator A, oscillator B, algorithm engine
In 3 modes
  • VO: oscillator A waveform → oscillator A
  • SS: all oscillators' waveform → algorithm engine
  • PM: both oscillators' waveform → oscillator A, oscillator B
Algorithm 251synthesis algorithm select
switch
algorithm engine
  • VO: VOSIM-based
  • SS: summation synthesis
  • PM: phase modulation
Master 251oscillator sync master
switch
oscillator A, oscillator B
  • A: B syncs to A
  • middle: both free running
  • B: A syncs to B
processor supply select 2515V or 12V CPU
jumper
—
  • 5 V: CPU on +5V rail
  • 12 V: CPU on +12V

Blocks 4

Blocks and their connections
BlockKindTypesInputsControlsOutputsSource
oscillator Apitch oscillatorOscillatorPitch A, SyncPitch A coarse, Pitch A fine—251
oscillator Bpitch oscillatorOscillatorPitch B, SyncPitch B coarse, Pitch B fine—251
algorithm enginethree-algorithm digital VCOComplex oscillator, Macro / multi-model oscillatorDamp, Modulate, MorphAlgorithm, Master, Damp, Mod, MorphOut251
wave folderfinal wave folderWaveshaper / wavefolderFoldFoldOut251

Modes 3

Modes
ModeKindSelected bySelection methodSource
VOalgorithm: VOSIM-basedAlgorithm = VO—251
SSalgorithm: summation synthesisAlgorithm = SS—251
PMalgorithm: phase modulationAlgorithm = PM—251

Specs 7

Specs
SubjectQuantityValueConditionSource
modulewidth10 HP—251
moduledepth1 inches—251
power+12V current150 mA—251
power+12V current80 mAusing 5 V supply251
power-12V current5 mA—251
power+5V current90 mAusing 5 V supply251
power+5V current0 mA5 V supply off251

Properties 9

Properties
SubjectPropertyValueSource
Pitch A/Pitch Bnormallingcross normaled251
OutcouplingAC251
Morphwaveform rangesine, triangle, saw251
sample rateschemevariable, pitch-based multisampling251
VObasisVOSIM251
SSbasisMoorer summation synthesis251
PMbasistwo-oscillator PM plus AM251
Syncavailabilityserial 700 onward251
processorsupply+5V or +12V selectable251

Behavior 6

Behavior rules
SubjectWhenEffectModeSource
Pitch Aunpatchedfollows Pitch B input—251
Pitch Bunpatchedfollows Pitch A input—251
Mastermiddle positionboth oscillators free running—251
MasterA selectedoscillator B syncs to A—251
MasterB selectedoscillator A syncs to B—251
Syncrising edgeresets oscillator states—251

Functions 5

Function tags
FunctionBasisScopeEvidenceSource
Digital / Wavetable Oscillatorblockpatchableblock algorithm engine: three-algorithm digital VCO251
1V/Oct Pitch Trackingjackpatchablejacks Pitch A/Pitch B: 1 V per octave inputs251
Oscillator Syncjackpatchablejack Sync resets oscillators; Master switch syncs A/B251
Waveshape MorphingcontrolpatchableMorph knob + CV: sine to triangle to saw251
Wavefolderblockinternalblock wave folder: Fold sets threshold, CV in251

Power

+12 V150 mA
−12 V5 mA
+5 V90 mA
Width10 HP
Depth25 mm

Other Digital / Wavetable Oscillator modules

All Digital / Wavetable Oscillator modules →

Sources 2

  1. [251]
    Loquelic Iteritas Manual ↗manual · primary
    ⚠ verified 2026-05-06 · the manufacturer changed this document since
  2. [252]
    Noise Engineering Loquelic Iteritas product page ↗product page
    ⚠ verified 2026-05-06 · the manufacturer changed this document since