xaoc-devices/timiszoara
Timiszoara
Stereo, Eurorack-compatible, voltage-controlled multi-effect signal processor based on the Spin Semiconductor FV-1 DSP chip, featuring a full stereo signal path, two adjustable audio inputs, two outputs, a stereo voltage-controlled wet/dry mixer, microSD card slot for loading factory and custom effects, OLED screen, and up to three voltage-controlled parameters per effect program.855
Capabilities 5
- Delaydelay
- Multiple delay banks including mono, stereo, multitap, ping-pong, pitch-shifted, parallax, spectral, and tap-tempo variants.855
- Multi-Effects Processormulti-effects
- 176 factory programs covering delays, reverbs, modulations, filters, pitch shifters, distortions, glitching, and stuttering, organized in banks of 8. Programs run on the Spin Semiconductor FV-1 DSP chip with 24-bit converters.855
- Pitch Shifterpitch-shifter
- 855
- Reverbreverb
- Multiple reverb banks including classic, hall, room, spring, experimental, and shimmer variants.855
- Vcfvcf
- DSP simulations of classic and modern synth filters including 12dB/24dB lowpass, highpass, formant, bandpass, and state variable filter types.855
Jacks 10 (8 in / 2 out)
| Name | Signal | Voltage | Description |
|---|---|---|---|
| Inputs (8) | |||
| Left Input | audio | — | Left audio input with individual attenuator. Normalled to the right input before the attenuators.855 |
| Mix CV | cv | -5V to 5V | CV input for the analog wet/dry crossfader. Accepts 10Vpp; with slider at middle, ±5V sweeps full range.855 |
| Next | trigger | — | Trigger input that advances to the next effect program in the current bank and loads it automatically. The list loops from position 8 back to 1.855 |
| Param 1 CV | cv | -5V to 5V | 855 |
| Param 2 CV | cv | -5V to 5V | 855 |
| Param 3 CV | cv | -5V to 5V | 855 |
| Right Input | audio | — | Right audio input with individual attenuator. Normalled to the left input before the attenuators.855 |
| Scan | cv | -5V to 8V | CV input for scanning effect programs. Each 1V change shifts one program forward or backward from the current selection. Removing the cable returns to the pre-CV state (equivalent to 0V).855 |
| Outputs (2) | |||
| Left Output | audio | — | 855 |
| Right Output | audio | — | 855 |
Parameters 7
| Name | Type | Range | Behavior |
|---|---|---|---|
| Left Input Attenuator | menu_setting | — | Adjusts the input level of the left audio input. Both input attenuators must be adjusted even with a single mono signal because normalling occurs before the attenuators.855 |
| Mix | fader | — | Controls the analog wet/dry crossfader, blending the original dry signal with the processed wet signal. Can be swept with a CV input.855 |
| Param 1 | fader | — | Controls the first parameter of the current effect program. Parameter name is displayed on the OLED screen. Can be combined with a CV input; with slider at center, ±5V CV sweeps the full range.855 |
| Param 2 | fader | — | Controls the second parameter of the current effect program. Parameter name is displayed on the OLED screen.855 |
| Param 3 | fader | — | Controls the third parameter of the current effect program. Parameter name is displayed on the OLED screen.855 |
| Program | menu_setting | 1 – 8 | 855 |
| Right Input Attenuator | menu_setting | — | Adjusts the input level of the right audio input. Both input attenuators must be adjusted even with a single mono signal because normalling occurs before the attenuators.855 |
Firmware history 0 versions
No firmware history recorded.
References 3
-
[855]
Xaoc Timiszoara Operator's Manual (voltage controlled DSP effector)manual● verified 2026-05-23
-
[856]
Xaoc Timiszoara Program Chart (algorithm reference)manual● verified 2026-05-23
-
[857]
Xaoc Devices Timiszoara product pageproduct_page● verified 2026-05-23