verbos/complex-oscillator

Complex Oscillator

Verbos Electronics

Analog dual-VCO complex oscillator in the West Coast tradition. A master oscillator with voltage-controlled waveshaper is paired with a modulation oscillator capable of FM and AM cross-modulation; both oscillators use discrete triangle-core designs with exponential converters.611

Capabilities 5

Amplitude Modulationamplitude-modulation
Modulation oscillator AM-modulates the master output; at max amount behaves like a ring modulator.611
Cross FMcross-fm
Modulation oscillator FM-modulates the master oscillator's frequency with selectable waveform and voltage-controlled amount.611
Dual VCOdual-vco
Two discrete analog triangle-core VCOs with exponential converters; modulation oscillator (1 CPM–500 Hz) and master oscillator (3 Hz–20 kHz).611
Wavefolderwavefolder
Master oscillator has a complex waveshaping circuit feeding the master output, blending from sine to square to saw to folded sine under voltage control.611
Waveshaper / Wavefolderwaveshaper
611

Jacks 13 (6 in / 7 out)

NameSignalVoltageDescription
Inputs (6)
Master OSC CV Inputcv—611
Master OSC FM Inputcv—611
Master OSC V/Octcv—611
Modulation OSC CV Inputcv—611
Modulation OSC FM Inputcv—611
Modulation OSC V/Octcv—611
Outputs (7)
Master OSC Sine Outaudio—611
Master OSC Square Outaudio—611
Master OSC Triangle Outaudio—611
Master Outaudio—Fed from a complex waveshaping circuit; blends sine to square to saw to folded sine under voltage control.611
Modulation OSC Saw Outaudio—611
Modulation OSC Square Outaudio—611
Modulation OSC Triangle Outaudio—611

Parameters 10

NameTypeRangeBehavior
Master OSC CV Attenuverterknob—Reversing attenuator (attenuverter) on the c.v. input, controlling depth and polarity of exponential pitch modulation for the master oscillator.611
Master OSC FM Attenuatorknob—Attenuates the f.m. input signal before it reaches the linear FM input of the master oscillator.611
Master OSC Frequencyknob3Hz – 20000HzSets the frequency of the master (right) oscillator from 3 Hz to 20 kHz.611
Mod Amountknob—Controls the amount of FM or AM applied from the modulation oscillator to the master oscillator. In AM mode at maximum, achieves ring-modulator-like effect.611
Modulation OSC CV Attenuverterknob—Reversing attenuator (attenuverter) on the c.v. input, controlling depth and polarity of exponential pitch modulation for the modulation oscillator.611
Modulation OSC FM Attenuatorknob—Attenuates the f.m. input signal before it reaches the linear FM input of the modulation oscillator.611
Modulation OSC Frequencyknob0.01667Hz – 500HzSets the frequency of the modulation (left) oscillator, ranging from 1 cycle per minute up to 500 Hz.611
Modulation Type Switchswitch—Selects FM (frequency modulation of master by modulation OSC), AM (amplitude modulation of master output), or Off (center/middle position).611
Sync Switchswitch—When flipped left (toward the arrow), causes the modulation oscillator to soft sync to the master oscillator, creating useful variation in FM/AM tones.611
Waveshape Select Switchswitch—Selects which waveform of the modulation oscillator (triangle, square, or saw) is used as the modulation source for FM or AM.611

Firmware history 0 versions

No firmware history recorded.

References 2

  1. [611]
    Verbos Complex Oscillator Tech Cardmanual
    ● verified 2026-05-21
  2. [612]
    Verbos Complex Oscillator product pageproduct_page
    ⚠ verified 2026-05-21 · manufacturer changed since last verified