tiptop-audio/z2040

Z2040

Tiptop Audio

Enhanced version of the SSM2040 filter chip, 4-pole low-pass VCF with configurable VCA, VC-FM, VC-resonance, and self-oscillation capability as a pure sine-wave VCO.822

Capabilities 3

Lowpass Filterlowpass-filter
4-pole 24dB/oct low-pass filter with SSM2040-based discrete core, VC-resonance, FM input, VC-FM index, configurable VCA, and self-oscillation as sine VCO.822
Sine-Wave VCO (self-oscillation)vco-sine
At maximum resonance with no input signal, the filter self-oscillates as a pure sine-wave VCO tracking over approximately 7 octaves with calibration.822
Vcfvcf
Voltage-controlled 4-pole resonant lowpass filter.822

Jacks 6 (5 in / 1 out)

NameSignalVoltageDescription
Inputs (5)
FM-INcv-2.5V to 2.5V822
INaudio822
VC-FM INcv-2.5V to 2.5V822
VC-GAINcv≤5V822
VC-REScv-2.5V to 2.5V822
Outputs (1)
OUTaudio822

Parameters 6

NameTypeRangeBehavior
FMknobAttenuates the FM-IN signal before it modulates the cutoff frequency.822
FREQUENCYknobSets the cutoff frequency of the 4-pole low-pass filter.822
GAINknobSets the input gain to the filter independently of the VCA position. At MIN–just before 0dB the filter behaves like SSM2040 with low distortion. At 0dB the resonance-gain-compensation circuit kicks in. Past 0dB–MAX, causes non-linear clipping and distortion.822
RESONANCEknobSets the resonance offset to the VC-RES input. At maximum, the filter self-oscillates as a pure sine-wave VCO.822
VC-FMknobAttenuates the VC-FM IN signal, which modulates the magnitude (index) of the FM input via a VCA on the FM line.822
VCA PositionjumperConfigures the audio VCA position: disabled (remove top jumper), input VCA, or output VCA. When set to output, no sound passes without a CV on VC-GAIN.822

Firmware history 0 versions

No firmware history recorded.

References 2

  1. [822]
    Tiptop Audio Z2040 VC-Filter v.2 Manualmanual
    ⚠ verified 2026-05-23 · manufacturer changed since last verified
  2. [823]
    Tiptop Audio Z2040 product pageproduct_page
    verified 2026-05-23