squarp-instruments/xp32

xp32

Squarp Instruments

Output expander for Hermod+, providing 32 fully-configurable CV/Gate outputs organized as 8 tracks of 4 outputs, each independently assignable to pitch, gate, velocity, modulation, aftertouch, clock, or MIDI CC.661

Capabilities 2

CV Output Expandercv-output-expander
Provides 32 fully-configurable CV/Gate outputs organized as 8 tracks of 4 outputs (ABCD), each independently assignable to PITCH, GATE, VELO, MOD, AFTC, CLCK, or CC.661
MIDI to CVmidi-to-cv
Can stream MIDI input (including USB MIDI from DAW) directly to CV/Gate outputs without recording. Supports MIDI CC to CV conversion.661

Jacks 32

NameSignalVoltageDescription
Outputs (32)
TR1 OUT Amixed-10V to 10V661
TR1 OUT Bmixed-10V to 10V661
TR1 OUT Cmixed-10V to 10V661
TR1 OUT Dmixed-10V to 10V661
TR2 OUT Amixed-10V to 10V661
TR2 OUT Bmixed-10V to 10V661
TR2 OUT Cmixed-10V to 10V661
TR2 OUT Dmixed-10V to 10V661
TR3 OUT Amixed-10V to 10V661
TR3 OUT Bmixed-10V to 10V661
TR3 OUT Cmixed-10V to 10V661
TR3 OUT Dmixed-10V to 10V661
TR4 OUT Amixed-10V to 10V661
TR4 OUT Bmixed-10V to 10V661
TR4 OUT Cmixed-10V to 10V661
TR4 OUT Dmixed-10V to 10V661
TR5 OUT Amixed-10V to 10V661
TR5 OUT Bmixed-10V to 10V661
TR5 OUT Cmixed-10V to 10V661
TR5 OUT Dmixed-10V to 10V661
TR6 OUT Amixed-10V to 10V661
TR6 OUT Bmixed-10V to 10V661
TR6 OUT Cmixed-10V to 10V661
TR6 OUT Dmixed-10V to 10V661
TR7 OUT Amixed-10V to 10V661
TR7 OUT Bmixed-10V to 10V661
TR7 OUT Cmixed-10V to 10V661
TR7 OUT Dmixed-10V to 10V661
TR8 OUT Amixed-10V to 10V661
TR8 OUT Bmixed-10V to 10V661
TR8 OUT Cmixed-10V to 10V661
TR8 OUT Dmixed-10V to 10V661

Parameters 20

NameTypeRangeBehavior
CLOCK RATEmenu_setting661
CV OUT BEND RANGEmenu_settingSets the output voltage range for incoming pitchbend events, from ±1 semitone up to ±5 octaves.661
CV OUT FINETUNEmenu_setting-100cent – 100centPrecisely offsets the output voltage in cents (hundredths of a semitone) to keep the connected oscillator in tune or create subtle detuning effects.661
CV PITCH RANGEmenu_settingOffsets the pitch voltage span. Default is -5V to +5V. Can be shifted up to 0V to +10V for modules requiring only positive voltages.661
CV RANGE MAXmenu_setting-10V – 10VSets the maximum output voltage for VELO, AFTC, MOD, MOD2, MOD3, MOD4, and CC output types. If MAX is lower than MIN, the signal is inverted.661
CV RANGE MINmenu_setting-10V – 10VSets the minimum output voltage for VELO, AFTC, MOD, MOD2, MOD3, MOD4, and CC output types. If MIN is higher than MAX, the signal is inverted.661
GATE HIGHmenu_setting-10V – 10VSets the gate output voltage for the high (active) state.661
GATE LOWmenu_setting-10V – 10VSets the gate output voltage for the low (inactive) state.661
GATE RETRIGmenu_settingON: gate briefly goes low then returns high when notes overlap (retrigger). OFF: gate stays high for overlapping notes, enabling legato/glide.661
OUTPUT STANDARDmenu_settingSelects the pitch standard: V/OCTAVE (default, Eurorack standard), 1.2V/OCTAVE (Buchla-compatible), or HZ/V (Korg MS series, Yamaha CS series).661
Output Typemenu_settingSelects the signal type for each of the four outputs (A/B/C/D) per track. Options include PITCH, GATE, VELO, MOD/MOD2/MOD3/MOD4, AFTC, CLCK, and CC00–CC119. Default configuration is PITCH, GATE, VELO, MOD.661
Track Button 1buttonSelects TR1 on the xp32. Lights at full brightness when selected, medium brightness when track contains data but is not selected.661
Track Button 2button661
Track Button 3button661
Track Button 4button661
Track Button 5button661
Track Button 6button661
Track Button 7button661
Track Button 8button661
TRIG NOTEmenu_settingSpecifies a particular note that triggers this gate output. Useful for drum sequencing where up to 4 voices can be triggered by setting different trigger notes. By default unspecified (any note triggers the gate).661

Firmware history 0 versions

No firmware history recorded.

References 2

  1. [661]
    Squarp xp32 Manualmanual
    verified 2026-05-21
  2. [662]
    Squarp xp32 product pageproduct_page
    verified 2026-05-21