ritual-electronics/amnis

Amnis

Ritual Electronics

A shift-register-based generative module that produces 8 gate outputs and 4 CV outputs (3 staircase, 1 slewed) from clock and data inputs, with an XOR input for linear feedback and compatibility with Turing Machine expanders.1115

Capabilities 4

Noise Generatornoise-generator
When clocked at audio rate with XOR feedback from Gate VIII, the module operates as a digital noise generator.1115
Random Gate Generatorrandom-gates
Produces 8 independent clocked gate outputs whose pattern is determined by the shift register content, with optional randomization via XOR feedback.1115
Random Sourcerandom-source
With the XOR input patched for linear feedback, the module generates pseudo-random sequences of gates and CVs.1115
Shift Registershift-register
Acts as an 8-bit digital shift register clocked by the Clock input; each bit is individually available as a gate output and combined into staircase CV outputs via R-2R networks.1115

Jacks 16 (4 in / 12 out)

NameSignalVoltageDescription
Inputs (4)
ClockclockClocks the shift register on each rising edge; comparator-based input with threshold around 2.5V.1115
DatamixedFeeds values into the shift register; accepts any signal and passes it through a comparator with a 2.5V threshold.1115
ResetgateEmpties the shift register when driven high; comparator-based with a built-in gate-to-trigger converter so only the rising edge triggers the reset.1115
XORmixedSecond input of the dual-input XOR gate that combines with the Data signal; enables linear feedback shift register behavior.1115
Outputs (12)
CV Allcv0V to 5VStaircase CV derived from all eight gate outputs combined via an 8-bit R-2R resistor network.1115
CV Evencv0V to 5VStaircase CV derived from all even-numbered gate outputs combined via an R-2R resistor network.1115
CV Oddcv0V to 5VStaircase CV derived from all odd-numbered gate outputs combined via an R-2R resistor network.1115
CV Slewcv0V to 5VSlew-limited version of the CV All output, producing a smooth CV; the degree of slewing varies with clock speed.1115
Gate Igate0V to 8VGate output for bit 0 of the shift register; 8V gate with 50% duty cycle of the clock.1115
Gate IIgate0V to 8VGate output for bit 1 of the shift register; 8V gate with 50% duty cycle of the clock.1115
Gate IIIgate0V to 8VGate output for bit 2 of the shift register; 8V gate with 50% duty cycle of the clock.1115
Gate IVgate0V to 8VGate output for bit 3 of the shift register; 8V gate with 50% duty cycle of the clock.1115
Gate Vgate0V to 8VGate output for bit 4 of the shift register; 8V gate with 50% duty cycle of the clock.1115
Gate VIgate0V to 8VGate output for bit 5 of the shift register; 8V gate with 50% duty cycle of the clock.1115
Gate VIIgate0V to 8VGate output for bit 6 of the shift register; 8V gate with 50% duty cycle of the clock.1115
Gate VIIIgate0V to 8VGate output for bit 7 of the shift register; 8V gate with 50% duty cycle of the clock.1115

Parameters 1

NameTypeRangeBehavior
Clock Delay TrimmerknobShifts the clock signal forward in time to align it with the Data input; located on the bottom PCB.1115

Firmware history 0 versions

No firmware history recorded.

References 2

  1. [1115]
    Ritual Electronics Amnis Manualmanual
    verified 2026-06-03
  2. [1116]
    Ritual Electronics Amnis product pageproduct_page
    verified 2026-06-03