plum-audio/roved

RO'VED (3U)

Plum Audio

A macro-oscillator built on the Mutable Instruments Plaits engine, featuring four CLICKKNOBS multifunction encoders for model selection and macro control, eight bicolor LEDs, and 24 synthesis models organized in Green, Red, and Orange banks.1076

Capabilities 1

Macro Oscillatormacro-oscillator
Provides 24 synthesis models across three banks (Green/Red/Orange) based on the Mutable Instruments Plaits engine, with four CLICKKNOBS for model selection and macro parameter control.1076

Jacks 8 (7 in / 1 out)

NameSignalVoltageDescription
Inputs (7)
FM CVcv—FM CV input normalized to the internal envelope generator when unpatched.1076
Level CVcv—Controls the internal digital low-pass gate or provides a per-model accent depending on the synthesis model in use.1076
MODE CVcv—1076
Morph CVcv—CV input for Morph macro parameter; normalized to the internal envelope generator when unpatched.1076
Timbre CVcv—CV input for Timbre macro parameter; normalized to the internal envelope generator when unpatched.1076
Triggertrigger—Drives the internal D-envelope or exciter engines depending on the selected synthesis model.1076
V/OCTcv-3V to 7V1076
Outputs (1)
Audio Outputaudio—DC-coupled audio output running at 48kHz with 16-bit resolution.1076

Parameters 8

NameTypeRangeBehavior
CLICKKNOB 1knob—Multifunction push-encoder serving as a model selector, primary sound control, and built-in attenuverter for modulation inputs.1076
CLICKKNOB 2knob—Multifunction push-encoder serving as a model selector, primary sound control, and built-in attenuverter for modulation inputs.1076
CLICKKNOB 3knob—Multifunction push-encoder serving as a model selector, primary sound control, and built-in attenuverter for modulation inputs.1076
CLICKKNOB 4knob—Multifunction push-encoder serving as a model selector, primary sound control, and built-in attenuverter for modulation inputs.1076
Frequencyknob—1076
Harmonicsknob—Macro parameter that shapes the harmonic content of the selected synthesis model.1076
Morphknob—Macro parameter shaping the morphological character of the selected synthesis model; CV input is normalized to the internal envelope generator when unpatched.1076
Timbreknob—Macro parameter controlling timbral character of the selected synthesis model; CV input is normalized to the internal envelope generator when unpatched.1076

Firmware history 3 versions

VersionReleasedNotes
1.2F12023-10-09Bug fix with navigation. Based on Plaits 1.2 firmware; introduces the new Orange bank with 6 new modes, web-based editor for custom data, and new internal sample-and-hold for CV input.1077
1.1—Adds firmware settings menu (access/exit by pressing FREQ & TIMBRE simultaneously); two new frequency lock modes (shift by octaves, shift by fifths); option to assign LEVEL CV to control internal envelope Decay; option to assign MODE CV to control Aux crossfade or LPG/VCA; SUB oscillator (Sine or Square); and alternative chords modes.1077
1.0—Initial firmware adapting the Plaits engine to the RO'VED interface; adds Frequency Lock toggle (press TIMBRE & MORPH) and calibration mode entry (press FREQ & HARM for about 4 seconds).1077

References 2

  1. [1076]
    Plum Audio RO'VED (3U) product pageproduct_page
    source 1076 canonical ↗ archived ↗
    ● verified 2026-06-02
  2. [1077]
    Plum Audio RO'VED firmware pagefirmware_notes
    source 1077 canonical ↗ archived ↗
    ● verified 2026-06-02