instruo/tanh3
tanh[3]
A three-channel analog waveshaper, limiter, overdrive, and feedback controller that applies the hyperbolic tangent (tanh) function to each input signal, producing soft clipping and harmonic saturation.1109
Capabilities 3
- Distortion / Saturatorsaturator
- Increasing the Level knob drives the input into soft-clipping overdrive/distortion.1109
- Limiterlimiter
- The tanh transfer function limits signal amplitude as a soft clipper; the module can also be inserted in feedback paths to prevent runaway oscillation.1109
- Waveshaper / Wavefolderwaveshaper
- Each of the three independent channels applies a tanh transfer curve for soft-clipping waveshaping of audio or CV signals.1109
Jacks 6 (3 in / 3 out)
| Name | Signal | Voltage | Description |
|---|---|---|---|
| Inputs (3) | |||
| CH1 Input | mixed | — | DC-coupled signal input accepting audio or control voltage; the signal level is set by the channel Level knob.1109 |
| CH2 Input | mixed | — | 1109 |
| CH3 Input | mixed | — | 1109 |
| Outputs (3) | |||
| CH1 Output | mixed | — | DC-coupled signal output carrying the tanh-processed version of the channel input.1109 |
| CH2 Output | mixed | — | 1109 |
| CH3 Output | mixed | — | 1109 |
Parameters 3
| Name | Type | Range | Behavior |
|---|---|---|---|
| CH1 Level | knob | — | Controls the input signal level fed into the tanh circuit; turning clockwise increases waveshaping, overdrive, and soft-clipping intensity.1109 |
| CH2 Level | knob | — | Controls the input signal level fed into the tanh circuit; turning clockwise increases waveshaping, overdrive, and soft-clipping intensity.1109 |
| CH3 Level | knob | — | Controls the input signal level fed into the tanh circuit; turning clockwise increases waveshaping, overdrive, and soft-clipping intensity.1109 |
Firmware history 0 versions
No firmware history recorded.
References 2
- [1109]
- [1110]