instruo/dail
dàil
A high-resolution quantiser, precision adder, MIDI-to-CV interface, and USB MIDI Host in a small 4 HP format, with an included 2 HP MIDI expander.900
Capabilities 4
- CV Utilitycv-utility
- 900
- MIDI to CVmidi-to-cv
- In MIDI-to-CV Interface mode, functions as a monophonic MIDI interface producing 1V/octave pitch CV (including pitch bend), gate, and trigger signals from MIDI note input via USB or TRS MIDI.900
- Precision Adderprecision-adder
- Signals at the Signal Throughput input sum with the quantised CV output; chromatic intervals can be programmed as offsets applied immediately without quantiser latency.900
- Quantizerquantizer
- Multi-octave bipolar quantiser engine with onboard and MIDI-programmable scales; supports chromatic interval activation, preset major/minor scales, and natural/equal distribution modes.900
Jacks 8 (5 in / 3 out)
| Name | Signal | Voltage | Description |
|---|---|---|---|
| Inputs (5) | |||
| CV | cv | -10V to 10V | Bipolar CV input that feeds the quantiser engine; the incoming voltage is quantised to the programmed scale.900 |
| Clk | clock | — | External clock input that gates a sample-and-hold after the quantiser engine; AND logic means the output updates only when both a new note is ready and a rising edge is received.900 |
| Expansion Back Jack | mixed | — | 3.5mm TRS jack on the back of the main module used to connect to the MIDI expander via the included cable.900 |
| In | cv | -10V to 10V | Bipolar CV input that sums with the quantised CV and the precision adder bias at the Output; used for transposition.900 |
| MIDI Expander TRS MIDI Input | mixed | — | TRS MIDI input on the expander module accepting Type A or Type B (switchable) adapters; connects a DAW or MIDI controller for MIDI-to-CV and scale programming.900 |
| Outputs (3) | |||
| Gate Output | gate | — | Outputs a gate high for the duration of a sustained MIDI note received via the expander's USB or TRS MIDI input; used in MIDI-to-CV mode.900 |
| Out | cv | -10V to 10V | Bipolar CV output carrying the sum of the quantised CV input, the signal throughput, and the precision adder offset.900 |
| Trigger Output | trigger | ≤5V | Fires a 5V trigger pulse each time the quantised output voltage changes; also fires when a rising edge at Clk coincides with a new note.900 |
Parameters 5
| Name | Type | Range | Behavior |
|---|---|---|---|
| A|B Switch | switch | — | Selects TRS MIDI Type A or Type B adapter compatibility on the expander's TRS MIDI input; shipped set to Type A.900 |
| Button 1 | button | — | Multi-purpose button: in Programming Interface activates/deactivates quantiser intervals and fills; in Quantiser Interface offsets output negatively by octaves (up to -9V); in Precision Adder Interface provides negative chromatic offset (up to -9V).900 |
| Button 2 | button | — | Multi-purpose button: in Programming Interface activates/deactivates precision adder intervals and fills; in Quantiser Interface offsets output positively by octaves (up to +9V); in Precision Adder Interface provides positive chromatic offset (up to +9V).900 |
| Interface Selection Toggle | switch | — | Three-position toggle selecting between Programming Interface (left), Quantiser Interface (centre), and Precision Adder Interface (right).900 |
| Slider | fader | — | Multi-purpose fader: navigates chromatic intervals in Programming Interface; sets global slew amount in Quantiser and Precision Adder Interfaces; used in preset scale selection gestures.900 |
Firmware history 0 versions
No firmware history recorded.
References 2
- [900]
- [901]