instruo/1f
[1]f
A single-fader crossfader, attenuator, attenuverter, and manual DC offset module for CV and audio processing.931
Capabilities 6
- Attenuatorattenuator
- With a signal at Input 1 only and Polarity Switch up, fader fully up passes the signal at unity, fader fully down reduces it to 0V.931
- Attenuverterattenuverter
- With a signal at Input 1 only and Polarity Switch down, fader fully up passes an inverted signal; fader fully down reduces it to 0V.931
- CV Sourcecv-source
- 931
- Fader / Slider Bankfader-bank
- Dedicated single-fader utility (crossfader/attenuator/attenuverter/offset) — a fader as the whole module.
- Offsetoffset
- Generates up to +10V (Polarity Switch up) or -10V (Polarity Switch down) DC offset when no signals are patched to the inputs.931
- Voltage-Controlled Crossfadercrossfader
- When signals are present at both inputs, the fader crossfades between Input 1 (fader up) and Input 2 (fader down).931
Jacks 3 (2 in / 1 out)
| Name | Signal | Voltage | Description |
|---|---|---|---|
| Inputs (2) | |||
| Input 1 | mixed | — | DC coupled input accepting audio or control voltage signals.931 |
| Input 2 | mixed | — | DC coupled input accepting audio or control voltage signals.931 |
| Outputs (1) | |||
| Output | mixed | — | DC coupled output passing audio or CV signals, or generating a unipolar DC offset when no inputs are connected; polarity determined by the Polarity Switch.931 |
Parameters 2
| Name | Type | Range | Behavior |
|---|---|---|---|
| Fader | fader | 0V – 10V | Processes signals at the inputs or sets the DC offset level when no inputs are connected. A bicolour LED illuminates white for positive output and amber for negative output.931 |
| Polarity Switch | switch | — | 931 |
Firmware history 0 versions
No firmware history recorded.
References 2
- [931]
- [932]