behringer/150
150 Ring Mod/Noise/S&H/LFO
Analog ring modulator, noise generator (white and pink), sample & hold, and LFO utility module in Eurorack format.763
Capabilities 5
- LFOlfo
- LFO with 5 waveforms, 3 frequency ranges (0.03-30 Hz), delay envelope, trigger reset, CV frequency control, and dual outputs with x1/x(1/10) level switch.763
- Noise Generatornoise-generator
- Generates white and pink noise, each available on two output jacks.763
- Random Sourcerandom-source
- 763
- Ring Modulatorring-modulator
- Analog ring modulator with X and Y signal inputs; output at R.M OUT.763
- Sample and Holdsample-and-hold
- S&H circuit with internal clock (2-25 Hz), external clock input, lag time smoothing, and signal-type optimization switch (EXT/LFO/NOISE).763
Jacks 15 — 6 in / 9 out
| Name | Signal | Voltage | Description |
|---|---|---|---|
| Inputs (6) | |||
| EXT CLOCK IN | clock | — | 763 |
| EXT SIG (S&H) | mixed | — | 763 |
| EXT SIG X/NOISE | mixed | — | Routes audio signals or noise into the ring modulator as the X input.763 |
| EXT SIG Y/LFO | mixed | — | Routes the carrier signal (audio or LFO) into the ring modulator as the Y input.763 |
| FREQ CV IN | cv | 0V to 10V | 763 |
| TRIGGER | trigger | — | 763 |
| Outputs (9) | |||
| CLOCK OUT | clock | — | 763 |
| LFO OUT 1 | cv | — | 763 |
| LFO OUT 2 | cv | — | 763 |
| PINK 1 | audio | — | 763 |
| PINK 2 | audio | — | 763 |
| R.M OUT | audio | — | 763 |
| S&H OUT | cv | — | 763 |
| WHITE 1 | audio | — | 763 |
| WHITE 2 | audio | — | 763 |
Parameters 8
| Name | Type | Range | Behavior |
|---|---|---|---|
| CLOCK RATE | fader | 2Hz – 25Hz | Controls the internal S&H clock rate; output is sent to CLOCK OUT jack.763 |
| DELAY | fader | 4ms – 8000ms | Controls time elapsed between a new note trigger and the LFO amplitude peak. Also sets the return-to-amplitude rate after a TRIGGER input resets the LFO to 0.763 |
| EXT/LFO/NOISE | switch | — | 3-way sliding switch that optimizes the S&H EXT SIG input for control signals (EXT), LFO signals, or noise signals.763 |
| FREQ | fader | 0.03Hz – 30Hz | Fine-adjusts LFO frequency within the range selected by the FREQ RANGE switch; overall range is 0.03 Hz to 30 Hz across 3 ranges.763 |
| FREQ RANGE | switch | — | 3-way sliding switch selecting high (H), mid (M), or low (L) LFO frequency range.763 |
| LAG TIME | fader | 0s – 8s | Smooths transitions between S&H output values, similar to portamento/glide. Higher values produce slower transitions.763 |
| OUTPUT LEVEL | switch | — | 2-way switch selecting full-strength (x1, 10 V p-p) or attenuated (x1/10, 1 V p-p) LFO output level.763 |
| WAVEFORM | knob | — | Selects LFO waveform: sine, triangle, square, ramp, or sawtooth.763 |
Firmware history 0 versions
No firmware history recorded.
References 1
-
[763]
Behringer 150 Ring Mod/Noise/S&H/LFO manual (mirror of official documentation via device.report)manual● verified 2026-05-22