| Automation Length | menu_setting | 2steps – 64steps | Sets the number of steps in the automation sequence per channel; selectable as 2, 4, 8, 16, 32, or 64 steps, with fine adjustment using CLK/MUTE.975 |
| BANK button | button | — | Loads, saves, or switches between one of six stored banks containing all channel settings and automations; also used for copy/paste of individual channel settings.975 |
| Channel buttons | button | — | Select the active channel (A through F); all knob and button operations then apply to that channel.975 |
| CLK button | button | — | Enters clock channel settings mode; used to configure internal or external clock rate and divider/multiplier.975 |
| CLK Divider/Multiplier | menu_setting | — | Sets the clock division or multiplication factor applied to the external clock input; ranges from /8 to ×4 with odd sub-steps accessible via SHIFT+CLK/MUTE.975 |
| CV Quantization | menu_setting | — | Enables pitch quantization on the CV output; scale type (major/minor, 8 options) is set with SHIFT+A/B/C buttons. D toggles quantization on/off.975 |
| CV Smoothing | menu_setting | — | Toggles the CV automation output between linearly-interpolated (smooth) and stepped (regular) playback.975 |
| CV Voltage Range | menu_setting | — | Switches the CV output range between 5 V and 2 V; combined with the bipolar/unipolar setting this gives various octave spans.975 |
| ENV Retrigger | menu_setting | — | Toggles whether the envelope resets from the start on each new trigger or completes its current shape before accepting new triggers.975 |
| ENV Shape | menu_setting | — | Selects the envelope shape: A=decay (RATE sets decay), B=variable shape (RATE sets decay and attack), C=attack, D=pulse (RATE sets pulse duration).975 |
| ENV Slew/AR | menu_setting | — | When activated, the envelope follows input voltage changes with the envelope's attack/decay times, enabling use as a slew limiter or AR envelope that respects gate duration.975 |
| Input Mode | menu_setting | — | Cycles through seven input routing modes for IN E, IN F, or META IN per channel: regular, regular attenuated, inverted, inverted attenuated, VCA, TRIG, and Sample & Hold.975 |
| LFO Shape | menu_setting | — | Selects the waveform shape for the LFO: saw, triangle (sine), ramp, pulse, or random (interpolated); pressing F toggles smoothing on the selected shape.975 |
| MODE button | button | — | Cycles through LFO, ENV, and CV modes for the selected channel; in CLK channel mode starts/stops the clock.975 |
| MUTE button | button | — | Hold and press a channel button to mute or unmute that channel's output.975 |
| RATE | knob | 35BPM – 420BPM | Sets the main variable of the selected channel — LFO speed, envelope duration, or CV output voltage depending on mode. Also used to set clock BPM in CLK channel mode.975 |
| REC button | button | — | Hold and turn RATE to record RATE automation; hold and tap SHIFT to record trigger events. Double-tap to clear respective automations.975 |
| SHIFT button | button | — | When held and combined with channel buttons, changes the shape or mode-specific settings of the selected channel. Combined with CLK syncs the LFO to clock.975 |
| Unipolar/Bipolar | menu_setting | — | Sets the selected channel output to bipolar (−5 V to +5 V) or unipolar (0 V to +5 V); not available in ENV mode which is always unipolar.975 |