addac-system/addac305
ADDAC305 Manual Latches
A combination of 8 manual latching toggle switches; each button toggles between gate high and gate low, outputting a 5V gate signal. Four of the eight latches additionally have signal inputs and can act as manual latching switches, passing the incoming signal to the output when toggled on.1125
Capabilities 3
- Gate Sourcegate-source
- Eight latch buttons each independently toggle a gate output between +5V and 0V.1125
- Manual Controllermanual-controller
- Eight latching buttons provide manual toggle control for performance or sequencing use.1125
- Signal Switchsignal-switch
- Four of the eight channels have signal inputs; when their button is toggled on, the incoming signal passes through to the output instead of the fixed +5V gate.1125
Jacks 12 (4 in / 8 out)
| Name | Signal | Voltage | Description |
|---|---|---|---|
| Inputs (4) | |||
| Signal IN 1 | cv | -10V to 10V | 1125 |
| Signal IN 2 | cv | -10V to 10V | 1125 |
| Signal IN 3 | cv | -10V to 10V | 1125 |
| Signal IN 4 | cv | -10V to 10V | 1125 |
| Outputs (8) | |||
| OUT 1 | gate | 0V to 5V | 1125 |
| OUT 2 | gate | 0V to 5V | 1125 |
| OUT 3 | gate | 0V to 5V | 1125 |
| OUT 4 | gate | 0V to 5V | 1125 |
| OUT 5 | gate | 0V to 5V | 1125 |
| OUT 6 | gate | 0V to 5V | 1125 |
| OUT 7 | gate | 0V to 5V | 1125 |
| OUT 8 | gate | 0V to 5V | 1125 |
Parameters 8
| Name | Type | Range | Behavior |
|---|---|---|---|
| Latch Button 1 | button | — | Toggles between gate high (+5V) and gate low (0V) on each press; state is latched, not momentary.1125 |
| Latch Button 2 | button | — | Toggles between gate high (+5V) and gate low (0V) on each press; state is latched, not momentary.1125 |
| Latch Button 3 | button | — | Toggles between gate high (+5V) and gate low (0V) on each press; state is latched, not momentary.1125 |
| Latch Button 4 | button | — | Toggles between gate high (+5V) and gate low (0V) on each press; state is latched, not momentary.1125 |
| Latch Button 5 | button | — | Toggles between gate high (+5V) and gate low (0V) on each press; state is latched, not momentary.1125 |
| Latch Button 6 | button | — | Toggles between gate high (+5V) and gate low (0V) on each press; state is latched, not momentary.1125 |
| Latch Button 7 | button | — | Toggles between gate high (+5V) and gate low (0V) on each press; state is latched, not momentary.1125 |
| Latch Button 8 | button | — | Toggles between gate high (+5V) and gate low (0V) on each press; state is latched, not momentary.1125 |
Firmware history 0 versions
No firmware history recorded.
References 1
-
[1125]
ADDAC305 Manual Latches product pageproduct_page● verified 2026-06-03