| 1V/oct | VCA switch | switch | — | Flipped down: channel jacks control pitch (0–10V, 1V/oct). Flipped up: channel jacks control level via VCA (0V=silence, +5V=normal volume). Locked channels remain in their current mode when switch is flipped.166 |
| Browse | knob | — | Navigates the sphere in a zig-zag (snake) pattern covering all 27 waveforms. Morphs between waveforms. Holding Fine adjusts by small amounts. Push+turn selects sphere (or in Sphere Recording Mode, adjusts Waveform Shift).166 |
| Depth | knob | — | Controls position in the Depth dimension of the sphere (visualized as red hue). Push+turn controls Dispersion. Holding Fine adjusts by small amounts. Hold channel button to adjust only that channel.166 |
| Fine | button | — | Hold Fine while turning a knob for micro-adjustment. Fine+Transpose detunes by cents, Fine+Browse adjusts browse by small amounts, Fine+Spread detunes each channel differently, Fine+LFO Phase adjusts phase in fine increments, Fine+LFO Speed adjusts by non-integer div/mult, Fine+LFO Gain adjusts amplitude finely.166 |
| Fine Tuning (Detuning) | menu_setting | — | 166 |
| Latitude | knob | — | Controls position in Latitude dimension (green hue). Push+turn controls Dispersion Pattern. Holding Fine adjusts by small amounts. Hold channel button to adjust only that channel.166 |
| Level sliders | fader | — | Adjusts channel volume (0–100%). In VCA mode, attenuates incoming CV. Hold channel button + move slider to adjust panning (all the way down = fully left, all the way up = fully right).166 |
| LFO Gain | knob | 0.4V – 8.8V | Push+turn LFO Speed knob to adjust LFO output amplitude. Default is 5V. Range is 0.4V to 8.8V. Only affects LFO OUT jack amplitude, not internal LFO->VCA routing.166 |
| LFO Phase | knob | — | Push+turn LFO Shape knob adjusts LFO phase. Each click adjusts by 1/24th of a measure. Hold Fine for 1/288th of a measure. Tap LFO Shape knob to re-sync all LFOs. Hold channel button+tap to re-sync just that channel.166 |
| LFO Shape | knob | — | Selects among 25 LFO waveshapes (Saw variants, Ramp-up variants, Sine, Triangle, Steady DC, and 12 complex shapes). Color of light next to each LFO OUT jack indicates current shape. Push+turn adjusts LFO Phase.166 |
| LFO Speed | knob | — | Steps through integer clock dividers and multipliers (÷64 to x32 and beyond). Hold Fine for non-integer amounts. Hold channel button to set per-channel speed. Push+turn adjusts LFO Gain (output amplitude). Base clock defaults to 2Hz.166 |
| LFO Type | button | — | Toggles LFO output type: Shape (waveshape), Gate (high above 50% amplitude), or Trigger (fires once per period when waveshape crosses 50% rising). Press both LFO->VCA and LFO Type together to cycle channel button modes.166 |
| LFO->VCA | button | — | Toggles internal routing of LFOs to channel VCAs. Press to toggle all channels; hold channel button while pressing to toggle only that channel. Slider light fades with LFO tempo when enabled.166 |
| Load/Save Preset | knob | — | Turn to select preset slot (108 slots across 6 pages). Tap then tap again to load; press 2 sec then tap to save; press 6 sec then tap to delete. Double-tap to load previously staged preset. Fine+Preset to undo/redo.166 |
| Longitude | knob | — | Controls position in Longitude dimension (blue hue). Push+turn controls WT Spread (Wavetable Spread). Holding Fine adjusts by small amounts. Hold channel button to adjust only that channel.166 |
| Octave | knob | — | Transposes channels by octaves. The SWN has an 18-octave range. Hold channel button to adjust only that channel. Push+turn selects Scale quantization.166 |
| Scale | knob | — | Selects quantization for each channel: No quantization (light blue), Major scale (pink), Harmonic minor (orange), Semitones (dark blue). Detuning is applied after quantization. Can be set per channel by holding channel button.166 |
| Transpose | knob | — | Shifts pitch of channels by semitones. Hold channel button to adjust only that channel. Hold Fine for microtonal detuning (1 cent per click). Push+turn selects Spread chord pattern. Transpose CV jack responds 0–10V with 1V/oct.166 |