2hp/comb
Comb
IIR peaking comb filter with control over cutoff frequency, resonance capable of self-oscillation, and a dampening filter in the feedback path. Uses an incredibly short tuned delay line to impose harmonic peaks on the source.782
Capabilities 1
- Comb Filtercomb-filter
- IIR peaking comb filter with self-oscillation capability and feedback path dampening.782
Jacks 5 (4 in / 1 out)
| Name | Signal | Voltage | Description |
|---|---|---|---|
| Inputs (4) | |||
| DAMP CV INPUT | cv | -5V to 5V | Control voltage input for DAMP. CV is added to the knob position.782 |
| FREQ CV INPUT | cv | -5V to 5V | Control voltage input for FREQ. CV is added to the knob position.782 |
| IN | audio | -5V to 5V | 782 |
| RES CV INPUT | cv | -5V to 5V | Control voltage input for RES. CV is added to the knob position.782 |
| Outputs (1) | |||
| OUT | audio | -5V to 5V | 782 |
Parameters 3
| Name | Type | Range | Behavior |
|---|---|---|---|
| DAMP | knob | — | Sets the cutoff frequency of a 1-pole filter within the feedback path. Far left = dampening fully applied, darker tone. Far right = no dampening, brighter tone.782 |
| FREQ | knob | — | Sets cutoff frequency that is inversely proportional to delay time. A cutoff frequency of 500Hz equals a delay time of 2ms.782 |
| RES | knob | — | Sets the feedback amount of the delay line which controls the amplitude of the resonant peaks. Can be driven into self oscillation.782 |
Firmware history 0 versions
No firmware history recorded.
References 2
- [782]
- [783]