intellijel/zeroscope-1u
Intellijel Zeroscope 1U
16 HP Eurorack module by Intellijel: 2 inputs, 2 outputs, 13 controls, 6 modes.
Inputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| CH 1 input 1322 | CH 1 scope input audio, cv | -10 to 10 V, bipolar coupling dc | → oscilloscope, tuner, CH 1 output |
| CH 2 input 1322 | CH 2 scope input audio, cv | -10 to 10 V, bipolar coupling dc | → oscilloscope, tuner, CH 2 output |
The documents don't state: scaling, audio rate, impedance (all inputs).
Outputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| CH 1 output 1322 | CH 1 thru audio, cv | — | from CH 1 input |
| CH 2 output 1322 | CH 2 thru audio, cv | — | from CH 2 input |
The documents don't state: voltage, polarity, scaling, coupling, audio rate, impedance (all outputs).
Controls 13
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Encoder 1322 | push-function encoder knob | oscilloscope, tuner | — |
| CH 1 1322 | CH 1 volts/division menu setting · 0.5 to 10 V/div | oscilloscope | — |
| CH 2 1322 | CH 2 volts/division menu setting · 0.5 to 10 V/div | oscilloscope | — |
| T 1322 | time base menu setting · 0.00001 to 10 s/div | oscilloscope | — |
| SCOPE type 1322 | display type menu setting | oscilloscope, tuner |
|
| TRIGGER Source 1322 | trigger source menu setting | oscilloscope |
|
| TRIGGER DETECTION LEVEL 1322 | trigger threshold menu setting · -10 to 10 V · bipolar | oscilloscope | — |
| CH 1 offset 1322 | CH 1 display offset menu setting · -10 to 10 V · bipolar | oscilloscope | — |
| CH 2 offset 1322 | CH 2 display offset menu setting · -10 to 10 V · bipolar | oscilloscope | — |
| GRID display 1322 | background grid menu setting | oscilloscope |
|
| ref 1322 | tuner reference pitch menu setting | tuner | — |
| avg 1322 | averaging time menu setting | tuner |
|
| SCREEN SAVER 1322 | display off delay menu setting | oscilloscope, tuner |
|
Blocks 2
Modes 6
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| Scope | time/voltage display | SCOPE type = Scope | — | 1322 |
| X-Y | X-Y display | SCOPE type = X-Y | — | 1322 |
| Tune | tuning display | SCOPE type = Tune | — | 1322 |
| Hz Display | Tune sub-display | — | press encoder in Tune | 1322 |
| Note Name Display | Tune sub-display | — | press encoder in Tune | 1322 |
| Advanced Settings | settings menu | — | long-press encoder | 1322 |
Specs 18
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 16 HP | — | 1322 |
| module | depth | 26 mm | — | 1322 |
| module | +12V current | 8 mA | — | 1322 |
| module | -12V current | 0 mA | — | 1322 |
| CH 1 input | input range | -10 to 10 V | — | 1322 |
| CH 2 input | input range | -10 to 10 V | — | 1322 |
| oscilloscope | vertical scale | 0.5 to 10 V/div | — | 1322 |
| oscilloscope | time base | 0.00001 to 10 s/div | — | 1322 |
| oscilloscope | intermediate timebase values | 17 count | — | 1322 |
| TRIGGER DETECTION LEVEL | range | -10 to 10 V | — | 1322 |
| TRIGGER DETECTION LEVEL | default | 0 V | — | 1322 |
| CH 1 offset | range | -10 to 10 V | — | 1322 |
| CH 2 offset | range | -10 to 10 V | — | 1322 |
| tuner | pitch deviation display | -45 to 45 cents | Note Name Display | 1322 |
| tuner | minimum input level | 2 V | Tune mode | 1322 |
| Encoder | long-press time | ≥ 1 s | — | 1322 |
| Tune mode indicator | timeout | 5 s | — | 1322 |
| SCREEN SAVER | delay | 1 to 120 min | — | 1322 |
Properties 6
Behavior 12
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| CH 1 input | patched | passes to CH 1 output | — | 1322 |
| CH 2 input | patched | passes to CH 2 output | — | 1322 |
| oscilloscope | T at 10 µs/div | only CH 1 displayed | — | 1322 |
| oscilloscope | input above timebase frequency | may show misleading waveform | — | 1322 |
| tuner | input below +2V | pitch detector fails | Tune | 1322 |
| TRIGGER DETECTION LEVEL | beyond waveform voltage limits | T? icon shown | — | 1322 |
| oscilloscope | Trg off | scope untriggered | — | 1322 |
| Encoder | turn in Hz Display | edits avg | Tune | 1322 |
| Encoder | turn in Note Name Display | edits ref | Tune | 1322 |
| Note Name Display | line right of note | note sharp | Tune | 1322 |
| Note Name Display | line left of note | note flat | Tune | 1322 |
| SCREEN SAVER | delay elapsed | display turns off | — | 1322 |
Power
| +12 V | 8 mA |
|---|---|
| −12 V | 0 mA |
| +5 V | — |
| Width | 16 HP |
| Depth | 26 mm |
Sources 2
- [1322]
- [1323]