intellijel/shapeshifter

Intellijel Shapeshifter Digital / Wavetable Oscillator · Chord / Paraphonic Oscillator

26 HP digital / wavetable oscillator and chord / paraphonic oscillator by Intellijel: 12 inputs, 4 outputs, 30 controls, 12 modes.

Intellijel · Cylonix Shapeshifter Manual (v2.03, 2020-03-10) (PDF) ↗

Digital / Wavetable Oscillator · Waveshape Morphing · 1V/Oct Pitch Tracking · Linear FM · Through-Zero FM · Oscillator Sync · Wavefolder · Ring Modulator · Chord / Paraphonic Oscillator · Vocoder / Spectral Processor · LFO · Delay · Logic Gates · End-of-Cycle / End-of-Rise Output · Tempo / Clock Sync

Inputs 12

Inputs
JackWhat it doesRangeConnections
PITCH1 886oscillator 1 pitch
pitch
-5 to 7 V
scaling v oct
→ Oscillator 1, Oscillator 2
PITCH2 886oscillator 2 pitch
pitch, clock
-5 to 7 V
scaling v oct
normalled from PITCH1
→ Oscillator 2
In 2 modes
  • QUANT clock: oscillator 2 clock input → Oscillator 2
  • QUANT on: ignored
RATIO 886osc 2 frequency ratio
cv
-5 to 5 V
→ Oscillator 2, Delay
In 1 mode
  • QUANT clock: clock division/multiplication → Oscillator 2
IFM 886internal FM level
cv
-5 to 5 V
→ Oscillator 1
FM 1 886linear FM osc 1
audio, cv
-5 to 5 V
scaling linear
audio rate yes
→ Oscillator 1
attenuated by MODULATION INPUT ATTENUATORS
FOLD CV 886fold amount
cv
-5 to 5 V
→ Wave folder
MOD A 886audio-rate modulation
audio, cv, trigger
-5 to 5 V
coupling ac
audio rate yes
→ Oscillator 1, Oscillator 2, Combination process, Vocoder
attenuated by MODULATION INPUT ATTENUATORS
selected by MOD A destination = Phase1, MOD A destination = Phase2, MOD A destination = Combo 1, MOD A destination = Combo 2, MOD A destination = Shaper 1, MOD A destination = Shaper 2, MOD A destination = Voc MOD, MOD A destination = OSC1 SYNC, MOD A destination = PrstStep
In 8 modes
  • Phase1: phase modulates osc 1 → Oscillator 1
  • Phase2: phase modulates osc 2 → Oscillator 2
  • Combo 1: replaces osc 1 in combo → Combination process
  • Combo 2: replaces osc 2 in combo → Combination process
  • Shaper 1: addresses osc 1 wavetable → Oscillator 1
  • Shaper 2: addresses osc 2 wavetable → Oscillator 2
  • Voc MOD: vocoder modulator → Vocoder
  • PrstStep: steps presets → Preset memory
SHAPE 1 886osc 1 wave select
cv
-5 to 5 V
→ Oscillator 1
SHAPE 2 886osc 2 wave select
cv
-5 to 5 V
→ Oscillator 2
MOD B 886low-rate modulation
cv
-5 to 5 V
→ Combination process, Oscillator 1, Delay, Percussion envelope, Preset memory
In 2 modes
  • MORPH: panel-to-preset blend → Preset memory
  • STEP MOD B: selects preset number → Preset memory
SYNC 886oscillator sync
trigger, gate, clock
-5 to 5 V
threshold 0.2 V
→ Oscillator 1, Oscillator 2, Percussion envelope, Preset memory
In 3 modes
  • PERC: triggers percussive envelope → Percussion envelope
  • PERC GATE: envelope gate → Percussion envelope
  • PRESET STEP: steps presets → Preset memory
FOLD IN 886wave folder input
audio
-5 to 5 V
normalled from OUT1
→ Wave folder

The documents don't state: polarity, impedance (all inputs); scaling (RATIO, IFM, FOLD CV, MOD A, SHAPE 1, SHAPE 2, MOD B); threshold (PITCH2, MOD A); coupling (PITCH1, PITCH2, RATIO, IFM, FM 1, FOLD CV, SHAPE 1, SHAPE 2, MOD B, SYNC, FOLD IN); audio rate (PITCH1, PITCH2, RATIO, IFM, FOLD CV, SHAPE 1, SHAPE 2, MOD B).

Outputs 4

Outputs
JackWhat it doesRangeConnections
OUT1 886osc 1 combined output
audio
—
from Combination process, Delay, Percussion envelope
In 1 mode
  • LFO 1: LFO output
OUT 2 886oscillator 2 output
audio
—
from Oscillator 2
In 1 mode
  • LFO 2: LFO output
PULSE 886two-level derived pulse
gate
0 to 5 V, unipolar
from Pulse logic
selected by PULSE source = +o1, PULSE source = EOC, PULSE source = OR, PULSE source = XOR, PULSE source = gLcH
FOLD 886wave folder output
audio
—
from Wave folder

The documents don't state: polarity (OUT1, OUT 2, FOLD); pulse (PULSE); coupling, impedance (all outputs).

Controls 30

Controls
ControlWhat it doesAffectsPositions
MANUAL DATA INPUT 886rotary encoder, push
other
LCD parameters
In 1 mode
  • push: enter/exit PRESET mode → Preset memory
WAVE BANK/SAVE 886wave bank select
button
Oscillator 1, Oscillator 2
In 1 mode
  • PRESET: save preset → Preset memory
SYNC/PULSE/STEP 886sync / pulse select
button
Oscillator 1, Oscillator 2, PULSE
In 1 mode
  • PRESET: PRESET STEP mode → Preset memory
MODA/MORPH 886MOD A destination
button
MOD A
In 1 mode
  • PRESET: MORPH mode → Preset memory
CHORD TYPE/MULTI/LOAD 886MULTI / chord type
button
Oscillator 1, Oscillator 2
In 1 mode
  • PRESET: load preset → Preset memory
INT. SYNC 886internal sync toggle
button
Sync oscillator
  • press once: sync at osc 1 frequency
  • press twice: sync at half frequency
  • off: no internal sync
In 1 mode
  • PRESET: load preset → Preset memory
RATIO/TIME 886osc 2 ratio offset
knob
Oscillator 2, Delay—
QUANT. 886ratio quantization
button
Oscillator 2
  • press once: ratio quantized to osc 1
  • press twice, LFO: PITCH2 becomes clock
  • off: free ratio
MODULATION INPUT ATTENUATORS 886modulation input levels
knob
FM 1, MOD A—
FINE 886fine pitch offset
knob
Oscillator 1, Oscillator 2—
COARSE 886coarse pitch offset
knob
Oscillator 1, Oscillator 2—
SHAPE 1 knob 886osc 1 wave select
knob
Oscillator 1—
SHAPE 2 knob 886osc 2 wave select
knob
Oscillator 2—
MOD B/MORPH 886MOD B offset
knob · bipolar
MOD B
In 1 mode
  • MORPH: panel-to-preset blend → Preset memory
COMBO MODE 886combination mode select
button
Combination process—
TILT/DRIVE 886TILT level
button
Oscillator 1
In 1 mode
  • CHORD: DRIVE level → OUT1
DELAY 886echo level
button
Delay—
DETUNE/DECAY 886chord detune
button
Oscillator 1
In 1 mode
  • PERC: DECAY TIME → Percussion envelope
CHORD MODE 886chord mode toggle
button
Oscillator 1—
FOLD 886fold amount
knob
Wave folder—
PERC MODE 886percussion mode
button
Percussion envelope
  • press once: triggered decay envelope
  • press twice: gate mode
  • press thrice: continuous play
LFO MODE 886LFO mode select
button
Oscillator 1, Oscillator 2
  • 1st press: osc 2 LFO
  • 2nd press: osc 1 LFO
  • 3rd press: both LFO
  • 4th press: LFO off
SYNC mode 886per-oscillator sync mode
menu setting
Oscillator 1, Oscillator 2
  • Hard: reset phase
  • Soft: reset in first quarter
  • Rev: reverse sync
  • Hold: hold sync
  • Bump: bump sync
  • 2=1: extra osc 2 syncs
  • 1=2: extra osc 1 syncs
  • 1shot: one cycle per event
  • Off: sync ignored
PULSE source 886PULSE output source
menu setting
PULSE
  • +o1: osc 1 positive
  • +o2: osc 2 positive
  • -o2: osc 2 negative
  • OR: either positive
  • AND: both positive
  • XOR: signs differ
  • gLcH: glitch combo sign
  • EOC: end of envelope
  • 1>2: osc 1 greater
  • 1<2: osc 1 lower
  • PWM: pulse width
  • Square: square
  • Random: random
MOD A destination 886MOD A target
menu setting
MOD A
  • Phase1: osc 1 phase
  • Phase2: osc 2 phase
  • Combo 1: replace osc 1 in combo
  • Combo 2: replace osc 2 in combo
  • Shaper 1: address osc 1 wavetable
  • Shaper 2: address osc 2 wavetable
  • Voc MOD: vocoder modulator
  • OSC1 SYNC: osc 1 sync source
  • PrstStep: step presets
combination mode 886nonlinear osc combination
menu setting
Combination process
  • osc1: osc 1 only
  • ring: multiply
  • min: lower value
  • pong: sign-switched
  • inlv: bit interleave
  • and: bitwise AND
  • xor: bitwise XOR
  • gLcH: glitch
MULTI 886waves strung together
menu setting
Oscillator 1, Oscillator 2
  • 1: 512 samples
  • 2: 1024 samples
  • 4: 2048 samples
  • 8: 4096 samples
2mod 886osc 2 modulation target
menu setting
Oscillator 1
  • SH1: osc 2 modulates SHAPE1
  • TLT: osc 2 modulates TILT
  • OFF: none
DETUNE 886chord detune amount
menu setting · 0 to 99
Oscillator 1—
echo 886delay feedback / mix
menu setting · 0 to 99
Delay—

Blocks 10

Blocks and their connections
BlockKindTypesInputsControlsOutputsSource
Oscillator 1wavetable oscillatorWavetable oscillator, OscillatorPITCH1, FM 1, IFM, SHAPE 1, SYNCSHAPE 1 knob, FINE, COARSE, CHORD MODE, TILT/DRIVE, LFO MODEOUT1886
Oscillator 2wavetable oscillatorWavetable oscillator, Oscillator, LFOPITCH2, RATIO, SHAPE 2, SYNCSHAPE 2 knob, RATIO/TIME, QUANT., LFO MODEOUT 2886
Sync oscillatorinternal synchronization oscillator——INT. SYNC—886
Combination processnonlinear combinationRing modulatorMOD A, MOD BCOMBO MODE, combination modeOUT1886
Delaycomb resonator/delay lineDelay, ResonatorMOD BDELAY, echo, RATIO/TIMEOUT1886
Percussion envelopeenvelope amplifierEnvelope generator, VCASYNC, MOD BPERC MODE, DETUNE/DECAYOUT1886
Wave folderanalog wave folderWaveshaper / wavefolderFOLD IN, FOLD CVFOLDFOLD886
Vocoder64-band vocoderSpectral / vocoder processor, Filter bank / EQMOD AMOD A destinationOUT1886
Pulse logicPULSE output sourceLogic—PULSE sourcePULSE886
Preset memory100-slot preset memory—SYNC, MOD A, MOD BMANUAL DATA INPUT, WAVE BANK/SAVE, SYNC/PULSE/STEP, MODA/MORPH, CHORD TYPE/MULTI/LOAD, MOD B/MORPH—886

Modes 12

Modes
ModeKindSelected bySelection methodSource
CHORD8 detuned osc 1 copiesCHORD MODE = onCHORD MODE button886
PERCtriggered percussive envelopePERC MODE = press oncePERC MODE once886
PERC GATEgated envelopePERC MODE = press twicePERC MODE twice886
LFO 1osc 1 LFOLFO MODE = 2nd pressLFO MODE button886
LFO 2osc 2 LFOLFO MODE = 1st pressLFO MODE button886
QUANT onratio quantizedQUANT. = press onceQUANT. once886
QUANT clockosc 2 follows clockQUANT. = press twice, LFOQUANT. twice in LFO886
INT. SYNCinternal syncINT. SYNC = press onceINT. SYNC button886
PRESETpreset operationsMANUAL DATA INPUT = pushpush encoder886
PRESET STEPpreset sequencing—STEP button in PRESET886
MORPHpanel-to-preset morph—MORPH button in PRESET886
Voc MODvocoderMOD A destination = Voc MODMOD A destination886

Hidden functions 6

Hidden functions
FunctionTriggerAffectsSource
preset name edithold COMBO MODE + STEPPreset memory886
randomize preset namehold COMBO MODE + SAVE in namingPreset memory886
randomize settingsCOMBO MODE + MORPH in PRESETPreset memory886
firmware versionhold DETUNE + LOAD in PRESET—886
chord type via MOD Bchord type 64th settingOscillator 1, MOD B886
2mod menuMODA button pressed twiceOscillator 1886

Specs 41

Specs
SubjectQuantityValueConditionSource
wavetablebanks128 banks—886
wavetablewaves per bank8 waves—886
wavetabletotal waves1024 waves—886
wavetablesamples per wave512 samples—886
wavetablesample depth16 bit—886
FM / PMmodulation rate98 kHz—886
CHORDoscillator copies8 oscillators—886
CHORDchord types64 chords—886
QUANTratio values16 ratios—886
QUANTratio range0.125 to 8 ratio—886
LFO modepitch drop7 octavesfront panel section886
LFO modepitch drop5 octavessignal flow section886
SYNCthreshold0.2 V—886
Vocoderbands64 bands—886
Vocoderfrequency range15 to 15000 Hz—886
Percussion envelopeattack≤ 1 ms—886
Percussion envelopedecay time0.002 to 10 s—886
DRIVEgain1 to 3 xCHORD886
DETUNEvalue range0 to 99 steps—886
echovalue range0 to 99 steps—886
Preset memorypreset slots100 presets—886
PRESET STEPDiv pulses per step1 to 8 pulses—886
MULTIwaves strung1 to 8 waves—886
internal processingclock rate25 MHz—886
outputsDAC sample rate98 kHz—886
MOD A / FM 1ADC resolution24 bit—886
other CV inputsADC resolution12 bit—886
other CV inputsADC sample rate25 kHz—886
wavetable readsample rate3 MHzCHORD off886
wavetable readsample rate700 kHzCHORD on886
OUT1 / OUT 2output level12 Vp-p—886
FOLD outputoutput level10 Vp-p—886
FOLD outputpeak level16 Vp-p—886
MOD B preset stepdelay after sync4 ms—886
modulewidth26 HP—886
moduledepth40 mm—886
moduledepth44 mm—887
modulecurrent +12V195 mA—886
modulepeak current +12V220 mA—886
modulecurrent -12V50 mA—886
phase accumulatorwidth55 bit—886

Properties 21

Properties
SubjectPropertyValueSource
Oscillator 1/2wave interpolationsmooth886
SHAPE knobswith CVoffset886
FINE / COARSEcombinationsummed with PITCH886
RATIO/TIMEcombinationsummed with RATIO886
MOD B/MORPHcenterzero offset886
MOD AcouplingAC886
Wave foldercircuitanalog, mFold II886
Wave folderdigitizedno886
Wave folderexternal signalsfoldable887
Delaytime sourceosc 2 period886
Delaytime slewslew-limited886
Vocodercarriercombiner output886
Percussion envelopesustainnone886
Percussion envelopedecay shapeexponential886
Preset memorystoragenon-volatile886
presetsname length8 characters886
panel controlsafter preset loadsoft pickup886
CHORDtuningjust or equal886
DRIVEsaturationcubic886
PULSEsample rate25MHz886
modulecoreFPGA887

Behavior 38

Behavior rules
SubjectWhenEffectModeSource
PITCH2unpatchednormalled to PITCH1—886
PITCH2QUANT onignored—886
Oscillator 2QUANT oninteger ratio of osc 1—886
RATIOQUANT clock modesets clock division/multiplication—886
Oscillator 2LFO mode, QUANT offignores COARSE and FINE—886
Sync oscillatorINT. SYNC onunaffected by osc 1 FM—886
Soft syncphase beyond 90 degreesno reset—886
1shot syncsync eventone complete cycle—886
2=1 syncosc 1 equals osc 2extra osc 2 sync—886
Off syncsync eventno effect—886
PEAK/LFO 1 LEDFM 1 or MOD A clippinglights—886
PEAK/LFO 1 LEDosc 1 LFO modeshows output 1 sign—886
PULSE/LFO 2 LEDosc 2 LFO modeshows output 2 sign—886
PULSE EOCPERC offalways high—886
PULSE EOCPERC decay phaselow—886
Shaper 2selectedPITCH2 and RATIO ignored—886
Shaper 1CHORD moderoot oscillator only—886
DelayDELAY parameter maximum100% feedback, infinite hold—886
DelayDELAY increasesdry level decreases—886
Delayosc 2 pitch changepitch shift / flanging—886
DRIVECHORD offnot operational—886
TILT/DRIVECHORD onsets DRIVE not TILT—886
DETUNE/DECAYPERC onsets DECAY TIME—886
DETUNEhigher pitchessmaller relative effect—886
PERC GATESYNC highenvelope held at max—886
PERC GATESYNC lowenvelope decays—886
Wave folderFOLD at zerooutput zero—886
FOLD INunpatchedOUT1 normalled—886
chord type64th settingset by MOD B—886
MORPHMOD B fully CCWpanel settings—886
MORPHMOD B fully CWpreset settings—886
MORPHINT. SYNC, PERC MODEalways panel—886
Preset memorypower-uplast preset loaded—886
STEP RandSeach triggerparameters randomized—886
STEP MOD Beach triggerMOD B selects preset—886
STEP Fw/Rvend preset reachedreverses direction—886
MOD B buttonssecond presstoggle MOD B modulation—886
INT. SYNCpressed twicehalf osc 1 frequency—886

Functions 15

Function tags
FunctionBasisScopeEvidenceSource
Digital / Wavetable Oscillatorblockpatchableblock Oscillator 1/2: wavetable oscillator886
Waveshape MorphingjackpatchableSHAPE 1/2 CV smooth wave interpolation886
1V/Oct Pitch Trackingjackpatchablejack PITCH1/PITCH2: 1V/Oct886
Linear FMjackpatchablejack FM 1: audio rate linear FM886
Through-Zero FMdocumented usepatchabledocumented: extremely high resolution TZFM887
Oscillator Syncjackpatchablejack SYNC + SYNC modes886
Wavefolderblockpatchableblock Wave folder: analog, FOLD IN886
Ring Modulatormodepatchablecombination mode ring; MOD A Combo886
Chord / Paraphonic Oscillatormodepatchablemode CHORD: 8 oscillators, 64 chords886
Vocoder / Spectral ProcessormodepatchableMOD A Voc MOD: 64-band vocoder886
LFOmodepatchableLFO MODE: oscillators as LFO886
Delayblockinternalblock Delay: comb resonator/echo886
Logic GatesmodepatchablePULSE source OR/AND/XOR, 1>2886
End-of-Cycle / End-of-Rise OutputmodepatchablePULSE source EOC: end of envelope886
Tempo / Clock SyncmodepatchableQUANT clock: osc 2 follows clock886

Power

+12 V195 mA
−12 V50 mA
+5 V—
Width26 HP
Depth40 mm

Other Digital / Wavetable Oscillator modules

All Digital / Wavetable Oscillator modules →

Firmware 7

VersionReleasedNotes
2.03—Added independently selectable SYNC modes for both oscillators with 1-shot and Hold modes. Added pressing INT. SYNC button twice causes internal sync event generator to drop in frequency by one octave (INT. SYNC LED flashes).886
2.02—886
2.01—Added INT. SYNC half-frequency mode, PITCH2 as clock input for OSC2 when QUANT pressed twice, 8 more pulse modes (PWM/Square/Random), preset randomization step mode, COMBO+MORPH randomize settings shortcut, firmware version display, OSC2 modulation of SHAPE1/TILT, MODA as sync or preset step source. Changed decay range, PERC LED behavior, IFM curve, TILT range, preset count to 100 in non-volatile memory with 8-char labels, soft-pickup after preset load. Fixed 4ms MODB preset stepping delay.886
1.04—Added GATE mode (PERC. MODE button pressed twice: SYNC input acts as gate for Out1 with immediate high and decay on low). Fixed inverted Pulse mode logic.886
1.03—Added 4 new MODA destinations (Phase1, Combo1, Shaper1, swapped vocoder carrier/modulator). Increased phase modulation and TILT modulation range 4-fold. Fixed coarse quantization of Shape1/Shape2 during Preset Morph. Fixed OSC2 pitch increase when changing Multi mode with QUANT on.886
1.02—Added just intonation/equal temperament chord mode tuning selection. Changed Hold sync mode to do holdsync for OSC1 and oneshot for OSC2. Added preset load confirmation message.886
1.01—Added firmware version display on splash screen. Fixed small waveform discontinuities in Shape1 and Shape2 during rapid modulation (present in v1.00).886

Sources 2

  1. [886]
    Cylonix Shapeshifter Manual (v2.03, 2020-03-10) ↗manual · primary
    ● verified 2026-05-24
  2. [887]
    Intellijel Cylonix Shapeshifter product page ↗product page
    ⚠ verified 2026-05-24 · the manufacturer changed this document since