intellijel/qx
Intellijel Qx
4 HP Eurorack module by Intellijel: 8 outputs, 6 modes.
Outputs 8
| Jack | What it does | Range | Connections |
|---|---|---|---|
| EOR 1 1245 | end of rise gate, trigger | 0 to 5 V, unipolar | from Quadrax channel 1 In 6 modes
|
| EOF 1 1245 | end of fall gate, trigger | 0 to 5 V, unipolar | from Quadrax channel 1 In 6 modes
|
| EOR 2 1245 | end of rise gate, trigger | 0 to 5 V, unipolar | from Quadrax channel 2 In 6 modes
|
| EOF 2 1245 | end of fall gate, trigger | 0 to 5 V, unipolar | from Quadrax channel 2 In 6 modes
|
| EOR 3 1245 | end of rise gate, trigger | 0 to 5 V, unipolar | from Quadrax channel 3 In 6 modes
|
| EOF 3 1245 | end of fall gate, trigger | 0 to 5 V, unipolar | from Quadrax channel 3 In 6 modes
|
| EOR 4 1245 | end of rise gate, trigger | 0 to 5 V, unipolar | from Quadrax channel 4 In 6 modes
|
| EOF 4 1245 | end of fall gate, trigger | 0 to 5 V, unipolar | from Quadrax channel 4 In 6 modes
|
The documents don't state: pulse, impedance (all outputs).
Controls 0
The record lists no controls.
Blocks 1
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Qx expander | EOR/EOF expander | Expander | — | — | EOR 1, EOF 1, EOR 2, EOF 2, EOR 3, EOF 3, EOR 4, EOF 4 | 1245 |
Modes 6
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| AD | Quadrax channel mode | — | set on Quadrax channel | 1245 |
| AHR | Quadrax channel mode | — | set on Quadrax channel | 1245 |
| CYCLE | Quadrax channel mode | — | set on Quadrax channel | 1245 |
| BURST | Quadrax channel mode | — | set on Quadrax channel | 1245 |
| LFO | Quadrax channel mode | — | set on Quadrax channel | 1245 |
| ALTERNATE LFO | Quadrax channel mode | — | set on Quadrax channel | 1245 |
Specs 6
Properties 6
Behavior 24
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| EOR | AD: attack reaches maximum | goes high | AD | 1245 |
| EOR | AD: decay phase completes | goes low | AD | 1245 |
| EOF | AD: attack reaches maximum | goes low (0V) | AD | 1245 |
| EOF | AD: decay cycle completes | goes high | AD | 1245 |
| EOR | AHR: attack reaches maximum | goes high | AHR | 1245 |
| EOR | AHR: release phase ends | goes low | AHR | 1245 |
| EOF | AHR: release phase starts | goes low (0V) | AHR | 1245 |
| EOF | AHR: release cycle completes | goes high | AHR | 1245 |
| EOR | CYCLE: attack half reaches maximum | goes high | CYCLE | 1245 |
| EOR | CYCLE: decay phase completes | goes low (0V) | CYCLE | 1245 |
| EOF | CYCLE: attack half reaches maximum | goes low (0V) | CYCLE | 1245 |
| EOF | CYCLE: decay phase completes | goes high | CYCLE | 1245 |
| EOR | BURST: each pulse begins | high for first half | BURST | 1245 |
| EOF | BURST: during burst length | stays 0V | BURST | 1245 |
| EOF | BURST: overall burst ends | high until next burst | BURST | 1245 |
| EOR | standard LFO: half-way through cycle | goes high | LFO | 1245 |
| EOR | standard LFO: cycle resets | drops to 0V | LFO | 1245 |
| EOF | standard LFO: first half | high | LFO | 1245 |
| EOF | standard LFO: second half | low (0V) | LFO | 1245 |
| EOR | alternate LFO: voltage moving negative | high | ALTERNATE LFO | 1245 |
| EOF | alternate LFO: voltage moving positive | high | ALTERNATE LFO | 1245 |
| Qx | Quadrax absent | does not function | — | 1245 |
| Qx | used without Quadrax | requires Quadrax | — | 1246 |
| I2C cable | connecting or disconnecting | power down first | — | 1245 |
Functions 1
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| End-of-Cycle / End-of-Rise Output | jack | patchable | jacks EOR 1-4 / EOF 1-4: end of rise/fall | 1245 |
Power
| +12 V | 8 mA |
|---|---|
| −12 V | 0 mA |
| +5 V | — |
| Width | 4 HP |
| Depth | 22 mm |
Sources 2
- [1245]
- [1246]