expert-sleepers/esx-8cv
Expert Sleepers ESX-8CV
4 HP Eurorack module by Expert Sleepers: 1 input, 8 outputs, 2 controls, 2 modes.
Inputs 1
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Expansion connector 1884 | link from ES-4/ES-40/ES-5 | — | → DACs |
The documents don't state: voltage, impedance (Expansion connector).
Outputs 8
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Output 1 1885 | CV output cv, pitch | -5.33 to 5.33 V, bipolar scaling v oct coupling dc audio rate no | from DACs selected by Jumper = not fitted In 1 mode
|
| Output 2 1885 | CV output cv, pitch | -5.33 to 5.33 V, bipolar scaling v oct coupling dc audio rate no | from DACs selected by Jumper = not fitted In 1 mode
|
| Output 3 1885 | CV output cv, pitch | -5.33 to 5.33 V, bipolar scaling v oct coupling dc audio rate no | from DACs selected by Jumper = not fitted In 1 mode
|
| Output 4 1885 | CV output cv, pitch | -5.33 to 5.33 V, bipolar scaling v oct coupling dc audio rate no | from DACs selected by Jumper = not fitted In 1 mode
|
| Output 5 1885 | CV output cv, pitch | -5.33 to 5.33 V, bipolar scaling v oct coupling dc audio rate no | from DACs selected by Jumper = not fitted In 1 mode
|
| Output 6 1885 | CV output cv, pitch | -5.33 to 5.33 V, bipolar scaling v oct coupling dc audio rate no | from DACs selected by Jumper = not fitted In 1 mode
|
| Output 7 1885 | CV output cv, pitch | -5.33 to 5.33 V, bipolar scaling v oct coupling dc audio rate no | from DACs selected by Jumper = not fitted In 1 mode
|
| Output 8 1885 | CV output cv, pitch | -5.33 to 5.33 V, bipolar scaling v oct coupling dc audio rate no | from DACs selected by Jumper = not fitted In 1 mode
|
The documents don't state: impedance (all outputs).
Controls 2
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Trim pot 1884 | output calibration knob | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | — |
| Jumper 1884 | output range jumper | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 |
|
Blocks 1
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| DACs | 12 bit DACs | MIDI / USB interface, Expander | Expansion connector | Trim pot, Jumper | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1885 |
Modes 2
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| calibrated | output range | Jumper = not fitted | PCB jumper | 1884 |
| jumper fitted | output range | Jumper = fitted | PCB jumper | 1884 |
Specs 14
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 4 HP | — | 1885 |
| module | depth | 49 mm | — | 1885 |
| module | +12V current | 41 mA | — | 1885 |
| module | -12V current | 33 mA | — | 1885 |
| module | CV outputs | 8 jacks | — | 1885 |
| DACs | resolution | 12 bit | — | 1885 |
| outputs | output voltage | -5.33 to 5.33 V | hardware calibrated | 1885 |
| outputs | output voltage | -9.5 to 9.5 V | uncalibrated (jumper) | 1885 |
| outputs | output voltage | -9.1 to 9.1 V | jumper fitted, approximate | 1884 |
| outputs | update rate | 0.041666666666666664 to 0.3333333333333333 x sample rate | depends on active channels | 1885 |
| outputs | update rate | 2 to 16 kHz | at 48kHz sample rate | 1885 |
| outputs | zero offset | ≤ 20 mV | approximate, uncalibrated | 1884 |
| outputs | calibration | 1 V/oct | factory | 1884 |
| outputs | calibration | 1.2 V/oct | recalibrated for Buchla | 1884 |
Properties 7
| Subject | Property | Value | Source |
|---|---|---|---|
| outputs | multiplexing | time-multiplexed | 1885 |
| outputs | calibration | hardware calibrated | 1885 |
| outputs | indicators | illuminated jack sockets | 1885 |
| module | host | ES-4, ES-40 or ES-5 | 1885 |
| module | software required | Combiner plug-in or Max | 1885 |
| module | timing | no jitter | 1885 |
| Trim pot | scope | all eight outputs | 1884 |
Behavior 8
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| output rate | more channels active | lower update rate | — | 1885 |
| outputs | audio-rate modulation | not fast enough | — | 1885 |
| Jumper | fitted | range approx ±9.1V | — | 1884 |
| Jumper | fitted | calibration-dependent software misbehaves | — | 1884 |
| Jumper | factory default | not fitted | — | 1884 |
| Trim pot | adjusted | all outputs change together | — | 1884 |
| Expansion connector | connected to Doepfer power bus | fuses supply, destroys module | — | 1884 |
| outputs | no Combiner software | no output signals | — | 1885 |
Power
| +12 V | 41 mA |
|---|---|
| −12 V | 33 mA |
| +5 V | — |
| Width | 4 HP |
| Depth | 49 mm |
Sources 2
- [1884]
- [1885]