# Zadar (Xaoc Devices)

Canonical page: https://eurorackref.com/xaoc-devices/zadar/

- id: `xaoc-devices/zadar`
- width: 10 HP; depth: 31 mm
- power: +12 V 50 mA, −12 V 15 mA, +5 V ? mA
- status: current
- functions: ADSR Envelope, Looping / Cycling Envelope

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| trig a | trigger, gate | envelope trigger/gate | not stated | unknown | not stated | 719 |
| asgn a | cv | assignable CV | -10 to 10 V | bipolar | not stated | 719 |
| trig b | trigger, gate | envelope trigger/gate | not stated | unknown | not stated | 719 |
| asgn b | cv | assignable CV | -10 to 10 V | bipolar | not stated | 719 |
| trig c | trigger, gate | envelope trigger/gate | not stated | unknown | not stated | 719 |
| asgn c | cv | assignable CV | -10 to 10 V | bipolar | not stated | 719 |
| trig d | trigger, gate | envelope trigger/gate | not stated | unknown | not stated | 719 |
| asgn d | cv | assignable CV | -10 to 10 V | bipolar | not stated | 719 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| out a | cv | envelope output | 0 to 10 V | unipolar | Channel a | 719 |
| out b | cv | envelope output | 0 to 10 V | unipolar | Channel b | 719 |
| out c | cv | envelope output | 0 to 10 V | unipolar | Channel c | 719 |
| out d | cv | envelope output | 0 to 10 V | unipolar | Channel d | 719 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| shape/rev | knob | shape select / reverse | — | Channel a, Channel b, Channel c, Channel d | 719 |
| rtg/time | knob | duration / retrigger mode | 0.85 to 1800000 ms | Channel a, Channel b, Channel c, Channel d | 719 |
| warp/rsp | knob | warp / response | — | Channel a, Channel b, Channel c, Channel d | 719 |
| sus/level | knob | sustain point / level | 0 to 10 V | Channel a, Channel b, Channel c, Channel d | 719 |
| channel | button | select edited channel | — | Channel a, Channel b, Channel c, Channel d | 719 |
| menu | button | cycle menu pages | — | Chain | 719 |

## Modes

- dg (rtg/time = push) [719]
- an (rtg/time = push) [719]
- nr (rtg/time = push) [719]
- CV assignment page (menu = press) [719]
- chain menu (menu = press) [719]
- preset menu (menu = press) [719]
- chain algorithms [719]
- repeat infinite [719]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Envelope | duration | 0.85 to 1800000 ms | — | 719 |
| Shapes | breakpoints per shape | 3 to 1000 breakpoints | — | 719 |
| Shapes | count | 270 shapes | — | 719 |
| Shapes | count | 260 shapes | — | 720 |
| Presets | slots | 18 slots | — | 719 |
| Chain | algorithms | 16 count | — | 719 |
| Chain | max envelopes | 4 envelopes | — | 719 |
| Repeat | count range | 0 to 100 cycles | plus ∞ when unchained | 719 |
| level | amplitude range | 0.01 to 10 V | — | 719 |
| Display | idle timeout | 10 min | — | 719 |
| tim CV | sensitivity for 1V/oct | -50 % | — | 719 |
| Module | width | 10 hp | — | 719 |
| Module | depth | 31 mm | — | 719 |
| Module | current +12V | 50 mA | — | 719 |
| Module | current -12V | 15 mA | — | 719 |
| Module | current +12V | 40 mA | — | 720 |
| Module | current -12V | 10 mA | — | 720 |

## Behavior

- dg retrigger: when new trigger arrives → restart, jump to 0V [719]
- an retrigger: when new trigger arrives → restart from matching voltage [719]
- nr retrigger: when trigger during envelope/chain → ignored [719]
- Sustain: when gate high at trig → envelope held at sustain point [719]
- Sustain: when point moved to end → sustain disabled (off) [719]
- Reverse: when envelope reversed → warp value retained [719]
- Reverse: when envelope reversed → sustain position unchanged [719]
- trig: when envelope chained to previous → trig input inactive [719]
- phase: when envelope unchained → acts as trigger delay [719]
- phase: when within chain → shift relative to previous envelope [719]
- Repeat: when set to ∞ unchained → oscillator-like behavior [719]
- Repeat: when envelope in chain → infinite repeat disabled [719]
- phase: when repeat greater than 0 → repeats counted as one cycle [719]
- Looped chain: when all phases zero → loop does not function [719]
- rev CV: when exceeds threshold → envelope reversed [719]
- frz CV: when exceeds threshold → envelope paused, value held [719]
- Default preset: when power-up → recalled [719]
- Display: when idle 10 minutes → screen turns off [719]
- phase: when default → zero [719]

## Sources

- [719] Xaoc Zadar / Nin Operator's Manual (rev. 1973/2.4) (manual): http://xaocdevices.com/manuals/xaoc_zadar_nin_manual_A4.pdf
- [720] Xaoc Zadar product page (product_page): https://xaocdevices.com/main/zadar/

Full record as JSON: https://eurorackref.com/xaoc-devices/zadar.json
