# TIRANA II (Xaoc Devices)

Canonical page: https://eurorackref.com/xaoc-devices/tirana-ii/

- id: `xaoc-devices/tirana-ii`
- width: 6 HP; depth: 40 mm
- power: +12 V 30 mA, −12 V 5 mA, +5 V ? mA
- status: current
- functions: Step Sequencer, Clock Divider / Multiplier

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| clock | clock | external clock | not stated | unknown | — | 1555 |
| directn | trigger | sequence direction change | not stated | unknown | — | 1555 |
| reset | trigger | reset to step 1 | not stated | unknown | — | 1555 |
| transp | cv | transpose offset | not stated | unknown | — | 1555 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| cv out | cv | step voltage | -5 to 10 V | unknown | sequencer | 1555 |
| gate | gate, trigger | step gate/trigger | not stated | unknown | sequencer | 1555 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| knob 1 | knob | step voltage | 0 to 10 V | cv out | 1555 |
| knob 2 | knob | step voltage | 0 to 10 V | cv out | 1555 |
| knob 3 | knob | step voltage | 0 to 10 V | cv out | 1555 |
| knob 4 | knob | step voltage | 0 to 10 V | cv out | 1555 |
| step 1 | button | step gate mute | — | gate, sequencer | 1555 |
| step 2 | button | step gate mute | — | gate, sequencer | 1555 |
| step 3 | button | step gate mute | — | gate, sequencer | 1555 |
| step 4 | button | step gate mute | — | gate, sequencer | 1555 |
| voltage range jumper | jumper | unipolar/bipolar range | — | cv out | 1555 |
| half range jumper | jumper | range attenuation | — | cv out | 1555 |
| in header jumper | jumper | primary/secondary chain role | — | sequencer | 1555 |

## Modes

- gate [1555]
- trigger [1555]
- div·mlt menu [1555]
- factory maintenance mode [1555]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 6 HP | — | 1555 |
| module | depth | 40 mm | skiff friendly | 1556 |
| module | +12V current | 30 mA | — | 1555 |
| module | -12V current | 5 mA | — | 1555 |
| clock | max clock rate | 320 Hz | — | 1555 |
| cv out | voltage range | 0 to 10 V | unipolar, full range | 1555 |
| cv out | voltage range | -5 to 5 V | bipolar, full range | 1555 |
| cv out | voltage range | 0 to 5 V | unipolar, half range | 1555 |
| cv out | voltage range | -2.5 to 2.5 V | bipolar, half range | 1555 |
| sequencer | steps | 4 steps | — | 1555 |
| sequencer | max sequence length | 16 steps | with step repeats | 1555 |
| step repeat | total triggers | 1 to 4 count | — | 1555 |
| ratcheting | triggers per step | 2 to 4 count | — | 1555 |
| clock divider | division | 2 to 4 ratio | — | 1555 |
| reset | latency | 0.35 to 2.8 ms | selectable 0.35/0.7/1.4/2.8 | 1555 |
| reset | default latency | 1.4 ms | — | 1555 |

## Behavior

- step: when muted → CV kept, gate muted [1555]
- step: when muted → stays in sequence [1555]
- directn: when trigger received → direction changes [1555]
- reset: when trigger received → return to step 1 [1555]
- transp: when CV patched → sequence offset [1555]
- step repeat: when set → note length retained [1555]
- div·mlt menu: when choice made → menu exits automatically [1555]
- clock division combo: when selected second time → original clock rate [1555]
- clock division: when new choice → cancel previous first [1555]
- div·mlt menu: when slow blink → multiplication [1555]
- div·mlt menu: when fast blink → division [1555]
- maintenance mode: when entering → unchain other units first [1555]
- chained units: when patching → use primary unit sockets [1555]
- older Tirana chained: when rev. II is primary → compatible after firmware update [1555]

## Sources

- [1555] xaoc-devices TIRANA II manual (manual): http://xaocdevices.com/manuals/xaoc_tirana_ii_manual.pdf
- [1556] xaoc-devices TIRANA II product page (product_page): https://xaocdevices.com/main/tirana2/

Full record as JSON: https://eurorackref.com/xaoc-devices/tirana-ii.json
